Created by S. Purcell Storage and Record Keeping Requirements for Transfusable Blood Components.

Slides:



Advertisements
Similar presentations
CAP/POCT 2003 Carol Riley-Hunte, RRT Senior Education Specialist Bayer HealthCare.
Advertisements

Radiopharmaceutical Production
HAZARD COMMUNICATIONS / E N V I R O N H & S T R A I N I N G P R O G R A M HAZARD COMMUNICATION PROGRAM OSHA Standard 29 CFR The OSHA hazard communication.
Contractor Safety Management
Crane Operations Objective
Louisiana Department of EnvironmentalQuality LDEQ CAM Plan Overview LDEQ’s 27 th Annual Conference on the Environment Cajundome Convention Center Lafayette,
Lockout-Tagout (Control of Hazardous Energy) This training program is designed to inform management of the requirements of the Lockout-Tagout Program for.
Controlling Hazardous Energy
QUALITY ASSURANCE IN BLOOD BANKING
CBER Irradiated Blood Components Jennifer Jones Consumer Safety Officer CBER, OBRR, DBA September 16, 2009.
CBER Cooperative Manufacturing Arrangements (Contractors) Jennifer Jones Consumer Safety Officer CBER, OBRR, DBA September 15, 2009.
External Defibrillators: Recalls, Inspections, and the Quality System Regulation Melissa Torres Office of Compliance December 15, 2010.
1 Quality Control Procedures During Autotransfusion AmSECT New Advances in Blood Management Meeting Seattle, Washington September 8, 2011John Rivera.
Unit #7 - Basic Quality Control for the Clinical Laboratory
Cold Chain Audit in compliance to NSQHS Std Yang Liu Stephen Lim Pam Allsop Pharmacy Department.
World Health Organization
Recommended by the Sentinel Event Alert Advisory Group NATIONAL PATIENT SAFETY GOALS FY 2009.
FDA Regulatory review in Minutes: What Product Development Executives Need-to-Know. Specifically, frequent causes of recalls and related areas that investigators.
Module 5: Assuring the Quality of HIV Rapid Testing
Support Programs version 2 March 2010 Cleaning and Sanitation
2011 NPMA Conference Series III National Capital Area Conference Leaders in Asset Management National Capitol Area Conference Charles L. Robinson, Director.
Occurrence Reports. An occurrence report is a document used to record an event when it occurs Occurrences are reported each time an occurrence occurs.
FDA Recommendations: Sampling Plans for Blood Establishments Lore Fields MT(ASCP)SBB Consumer Safety Officer OBRR/CBER/FDA October 19, 2012.
IN THE NAME OF GOD Quality Assurance and Blood Bank S. AMINI KAFI ABAD CLINICAL AND ANATOMICAL PATHOLOGIST IRANIAN BLOOD TRANSFUSION ORGANIZATION(IBTO)
ASSURANCE PINNACOL ASSURANCE Wants you to know about : EMERGENCY/DISASTER PREPAREDNESS.
REGULATIONS FOR BLOOD and BLOOD PRODUCTS JILL HOAG BS, SBB(ASCP) CQA(ASQ) AABB STAFF LEAD ASSESSOR 1.
Leukocyte-Reduced Blood Components Lore Fields MT(ASCP)SBB Consumer Safety Officer, DBA, OBRR, CBER September 16, 2009.
CBER Alternative Procedures “Variances” Judy Ellen Ciaraldi BS, MT(ASCP)SBB, CQA(ASQ) CBER, OBRR, DBA September 15, 2009.
Occurrence Reports. An occurrence report is a document used to record an event when it occurs Occurrences are reported each time an occurrence occurs.
Dispensary and Administration Site Information Presentation.
of blood and components
Transfusion Medicine Transport of Blood, Blood Components and Derivatives within a Facility DSM Educational Resource Materials for the Training of Facility.
06/01/20161 Benny Hoff TÜV NORD Sweden AB AFS 2002:1 Use of pressure equipment.
CBER Common Problems on Source Plasma Inspections Judy Ellen Ciaraldi BS, MT(ASCP)SBB, CQA(ASQ) CBER, OBRR, DBA September 16, 2009.
Regulatory Issues in Laboratory Management
Teknologi Pusat Data 12 Data Center Site Infrastructure Tier Standard: Topology Ida Nurhaida, ST., MT. FASILKOM Teknik Informatika.
World Health Organization
Laboratory equipment Dr. W. Huisman Cairo, November 21th 2012.
© Food – a fact of life 2009 Hazard Analysis Critical Control Point (HACCP) HACCP is a system which looks for and prevents potential problems before they.
Storage, Labeling, Controlled Medications Guidance Training CFR § (b)(2)(3)(d)(e) F431.
Responsibilities of Sponsor, Investigator and Monitor
Governing Body QAPI 2013 Update for ASC
Inventory Management Chapter 13.
Chapter 19: Network Management
Restraints Module for LIPs
GOOD MANUFACTURING PRACTICE FOR BIOPROCESS ENGINEERING (ERT 425)
Responsibilities of Sponsor, Investigator and Monitor
Unit #6 - Basic Quality Control for the Clinical Laboratory
THURSDAY TARGETED TRAINING: Reporting Regulations and Requirements
Overview of Quality Assurance
Return/Wasted Vaccine Reporting
Storage and Record Keeping Requirements for Transfusable Blood Components Created by S. Purcell.
Transfusion Medicine Transport of Blood, Blood Components and Plasma Protein Products within a Facility BBM Educational Resource Materials for the Training.
Hazard Analysis Critical Control Point (HACCP)
Temperature Monitoring and Excursions
Quality Management Systems – Requirements
Treatment – Chlorine Disinfection
World Health Organization
ISO 9001 Awareness Training.
RAC Update January 8, 2018.
Controlled Substances
Control of Hazardous Energy
Temperature Review and Reporting
TRANSFUSIONS IN THE COMMUNITY
Training for rotavirus vaccine introduction
Internal Control Internal control is the process designed and affected by owners, management, and other personnel. It is implemented to address business.
Controlled Substances
Proper vaccine storage in ltc
Storage and Record Keeping Requirements for Transfusible Blood Components Presenter: S. Purcell.
Proper vaccine storage in ltc
Presentation transcript:

Created by S. Purcell Storage and Record Keeping Requirements for Transfusable Blood Components

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Objectives  Transfusable Blood Component Temperature Requirements  Storage and Maintenance of Blood Components  Identifying, Investigating, and Documenting Deviations  Reporting Requirements  Hospital Inspections by Blood Center

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Why is this important? Code of Federal Regulations Title 21, Part 600 –Sec (a)...the Red Blood Cells shall be placed in storage and maintained at a temperature between 1 and 6 deg. C. –Sec (a) …Platelets shall be placed in storage at the selected temperature range. If stored at 20 to 24 deg. C, a continuous gentle agitation of the platelet concentrate shall be maintained throughout the storage period.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Why do blood product storage deviations need to be reported to the FDA? Sec Reporting of biological product deviations by licensed manufacturers. You must report any event, and information relevant to the event, associated with…storage…if that event… 1.Represents a deviation from current good manufacturing practice, applicable regulations, applicable standards, or established specifications that may affect the safety, purity, or potency of that product. 2.Represents an unexpected or unforeseeable event that may affect the safety, purity, or potency of that product; and 3.Occurs in your facility or another facility under contract with you; and 4.Involves a distributed biological product.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Transfusable Blood Component Temperature Requirements Storage Temperature Requirements –Blood in the body is typically maintained at a temperature of approximately 37C. –The body has a mix of gases such as oxygen and carbon dioxide along with other elements that are able to maintain the blood at a single constant temperature. –After the blood is collected, there are different storage temperature requirements. Research has established required temperature ranges to maintain the blood’s safety, purity, potency and quality for safe blood transfusions. Blood components have distinct storage temperature requirements due to their varying make-up and purposes as well. –In addition to blood components being maintained at certain temperatures, the blood can only be stored at those temperatures for a fixed period of time.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Transfusable Blood Component Temperature Requirements All blood components have a shelf-life. After the shelf-life has expired the blood components can no longer be safely transfused and they are discarded or used for other purposes. Definitions Purity – uniform and free from foreign matter. Potency - the ability of the blood component to produce the desired medical effects.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Transfusable Blood Component Temperature Requirements ComponentTemperature RangeShelf LifeStorage Unit Whole Blood1-6C21 or 35 Days Refrigerator Red Blood Cells1-6C42 DaysRefrigerator Cryo/Pooled Cryo-18C or Colder1 YearFreezer Plasma-18C or Colder1 YearFreezer Platelets20-24C5 DaysIncubator/Agitator or Monitored Room

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Transfusable Blood Component Temperature Requirements Transportation Temperatures: –Generally the same as storage except for RBCs, which are 1-10C –Limited amount of time at 1-10C –If a box is used for storage, all storage requirements apply.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Storage unit configuration –Organized in an orderly fashion Facilitates proper air circulation and even temperature distribution Facilitates identification of units Facilitates use of short dates first Segregated based on unit status –Blood Type –Quarantine –Autologous –Directed

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Storage unit configuration, continued –Top to bottom Top: Available general inventory Above Quarantine, below Available Inventory: Reagents Bottom: Quarantine and/or biohazardous

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Temperature Monitoring and Alarms –Temperatures within the storage units must be monitored at all times. Automated temperature monitoring systems Recording charts –Storage units must contain some type of temperature monitoring device (TMD) that constantly records the temperature inside the storage unit. Small units only require one thermometer. One thermometer must be in the same solution as the probe for the chart recorder or immediately adjacent –TMD maximum liquid volumes Refrigerators 250ml Platelet incubators 40 ml Freezers 100 ml

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Temperature Monitoring and Alarms Recording charts require a daily reading and comparison of the internal TMD with the chart temperature Refrigerators and Platelet Incubators must be within 1C of each other Freezers must be within 2C of each other Chart adjustment may be required if the variances are greater –Recording charts require: Date, time, and initials of staff starting chart Date, time, and initials of staff removing chart Hospital Name and address Unique identifier of equipment being monitored Timely review –If the temperature monitoring system ever fails then temperatures must be manually taken and documented on the appropriate Daily Quality Control Record at least every four hours.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Temperature Alarms All storage units must be equipped with an alarm that is set to trigger if the temperatures are close to drifting out of the acceptable range. If an alarm sounds staff must respond and investigate immediately. The alarm reason and investigation must be documented on the appropriate Daily Quality Control Record. The alarm system must be monitored 24 hours per day. –On site staffing –Remote alarms

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Unacceptable Storage Conditions –Outside of the acceptable temperature range –Unacceptable variance between a TMD and the recording chart –The recording chart stops recording –These require immediate correction and investigation Was the door shut all the way? Has it been opened frequently? Is there power? Are the probes in the solution? Is the recording chart recording accurately? If the problem cannot be resolved within 30 minutes of the last acceptable reading, components must be moved to an alternate location

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components If relocation is required –Use another monitored unit with the same temperature range if available. OR –Pack in UBS shipping containers (or other local blood center approved shipper). OR – Move to another location that maintains the same temperature range. AND –Record the temperature at least every 4 hours. Document all actions taken.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Maintenance of storage units –Routine preventative maintenance keep equipment operating efficiently –Review all operator’s manuals upon receipt of new equipment Learn how to operate the equipment Identify recommended maintenance and testing schedules –Follow manufacturers recommendations

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Storage and Maintenance of Blood Components Reading Temperatures Record temperatures to the nearest increment –If the device reads in whole numbers, record temperatures in whole numbers –Round up if in the middle of two markings Calibrate thermometers –Annually for most –Electronic thermometers may require more frequent calibration. Refer to certificate and operators manual –Indicate next calibration due date on thermometer Recording charts –Determine increments of recording chart –Read from the center (usually the highest temperature) outward (usually the lowest temperature) –Compare daily against closest thermometer –Verify date, time, and temperature increments before reading temperature

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations Respond appropriately to potential and actual temperature deviations. Respond to warnings to prevent temperature deviations. Properly handle products if they need to be moved. Appropriately document activities, temperatures and comments. –Document on affected record or record location of documentation on record –It is not sufficient to attach records. You must explain the situation.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations The majority of common errors generally fall into one of the following four categories: –Failure to respond to warnings or alarms –Untimely relocation of products –Failure to document activities, temperatures and comments –Lack of timely notification to the blood center

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations Problems causing temperature deviations and/or excursions –There is no documentation or insufficient documentation regarding what happened and what steps were taken when a temperature excursion occurred –Warnings are not addressed before temperature exceeds the acceptable limits –Equipment going through its normal defrost cycle along with a high amount of traffic causing a temperature excursion –A storage door being open too long or didn’t close completely –Equipment is under repair yet it is still being used to store product

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations Contributing Factors –Staff believe it is acceptable for temperatures to be out of range as long as the temperature is “close” to the acceptable range. It is never acceptable for temperature excursions beyond the component limits. –The rules for rounding temperature measurements are difficult to interpret. When necessary, temperatures must be rounded up. –Some product storage units have a combination of alarm delays and alarm set points that allow the unit to go out of the acceptable range without the alarm sounding. Alarms must sound prior to temperature excursions beyond acceptable limits. –There is confusion about the length of time products can be exposed to temperatures beyond the acceptable range for storage. Components must not be out of storage greater than 30 minutes.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations What is an Alarm Signal? –Alarm – An electronic or mechanical device that serves to warn of danger or by means of a sound or signal. –How does this relate to what you do? An alarm signal = a warning = an opportunity to prevent a deviation. If corrective action will not or cannot prevent a deviation, the alarm allows you time to react such as; moving the product to alternate storage. Remember: Alarms = potential/actual deviation = more documentation of: –Temperature and times –Individual(s) involved –Actions taken –When, where, how products are moved

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Identifying, Investigating, and Documenting Deviations Posted instructions for corrective action: Is it current? Does it present easy to follow instructions so staff can respond appropriately? Is it visible? Adequate documentation of an event must include: Date Time of all steps taken Initials for employee(s) involved Duration Action Taken Identification for; storage, thermometers, etc.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Reporting Requirements Important numbers: –30 The number of minutes a component may be out of controlled storage. OR The number of minutes a component may be exposed to unacceptable temperatures. NOTE: The amount of time blood components are out of appropriate storage should be minimized. –4 The maximum acceptable hours between manual temperature recordings. Usually satisfied through the use of a chart recorder or automated monitoring system. If those are not available, manual temperatures are required.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Reporting Requirements Dates and Times of all actions taken and observations made: What time was the problem identified? How long did it occur? Were there components stored within at the time? What time were they moved? What were the temperatures of both the pre and post movement storage chambers? Do you have a backup system that has been validated and QC is current? What units were involved? The blood center must be notified prior to returning or transferring any components that fall outside acceptable limits. –The documentation will be evaluated and you will be informed whether the units are acceptable for return. What are your options if you cannot return? Consult your Medical Director regarding the use of the components at your facility.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Hospital Inspections by Blood Center What are we assessing? We use three forms to inspect all storage areas. You can find each form (BS 983A, BS 983B, BS 983C) on the United Blood Services website. Use the forms to prepare prior to your inspection.

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Hospital Inspections by Blood Center What are the possible outcomes? No findings Findings requiring a written response within 30 days Suspension of return privileges Recall of affected components requiring reporting to the FDA

BioCARE: RGB BioCARE: RGB Blood Systems: RGB Blood Systems: RGB Blood Centers: RGB Blood Centers: RGB BSRI: RGB BSRI: RGB Blood Systems Labs: RGB Blood Systems Labs: RGB CTS: RGB CTS: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Accent Color: RGB Thank you Questions? Please contact your local blood center