Custom template diagram Bow Custom template diagram Gunnel Gunnel Starboard Side Portside Stern Swim Platform Extended Swim Platform Rev 1.1 2_24_16

Custom template Notes ______________________________________________ Customer Name, Address and Contact information As the customer creates each template with the use of the marker and template material, please draw a rough outline on the custom template diagram. Please number each part on template material and provide brief description below of each part. If additional custom template diagram or notes are needed, please download from Aqua Traction website. Boat Manufacturer, year and model Part number and description ______________________________________________ Color / Type of Aqua Traction (See website for options – Call Aqua Traction color/type is not available on website) Color(s)_________________________________________ Texture: Aqua Groove____ Aqua Dot____ Faux Teak____ Faux Teak line direction: Bow to Stern or Port to Starboard Thickness: 3mm 6mm 9mm Custom Logo: (Please specify) Please note that all information must be completed before project will be quoted by Aqua Traction. Aqua Traction logo will in included on decking material, unless specified. Rev 1.1 2_24_16

Custom template Instructions Each template kit should contain transparent template material and permanent marker. Ensure kit contains enough template material to complete the template of your custom Aqua Traction application. (Generally a 22-24’ bay boat will require 4-5 template sheets) Lay transparent template material on surface you plan to apply Aqua Traction on, center and tape to surface. On boats with non-skid to skid surface (I.E. bay boat), utilize permanent marker and straight edge to trace outline of the skid surface. If non-skid to skid surface is not present, lay transparent template material on preferred location and trace desired pattern. If the pattern choice is Aqua Groove or Faux Teak, please specific desired line direction as well as the orientation from part to part. It is recommended that you draw a few lines of the transparent template material, as well as lines from part to part. Identify latches, hinges, cleats or cutouts on the transparent template material Template material may be cut and taped together to create full desired template outlines. Please note that sheets sizes come in 40”x 80” and 50” x 54”, if desired part exceeds these dimensions, part may need to be split into multiple parts. Part splitting will be done during the design process. Once templates are complete, do not cut on the line you have traced with the marker, this line will be used for reference with the digitizer to finalize template design. Rev 1.1 2_24_16

Custom template Instructions Draw sketch of each part and number on Custom Template Diagram. Document description of each part on the Custom Template Notes. Each piece of transparent template material should contain the following information; Part number – Part number should also be associated to sketch on template and description Customer name and phone number Top side of template Direction of bow, stern, portside and starboard side Color choice and type of flooring Note any cutouts, latches, hinges or cleats Note desired location of custom logo, if applicable Before template is removed, take digital photo Refer to sample templates during custom template design process. Complete all information and forms associated with the custom design process. Take your time developing your custom templates, the more accurate template you provide the more precise your finished product will be. During the custom template design process, please refer to www.aquatraction.com for reference videos, or contact Aqua Traction for questions and concerns. Rev 1.1 2_24_16