TIPS TO MEASURE REPLACEMENT WINDOWS

Measuring replacement windows is essential for successfully installing new windows. Learning how to measure a window will help ensure precision and therefore, best performance of new windows.

How to measure a window? 1) Determine the width : Using a tape measure, measure the width from the inside of the jamb on one side of the window to the inside jamb on the other side of the window. 2) Determine the height: Measure the height from the head of the window

Tips For Measuring Windows When planning a window replacement project, it's important to approach the steps in your project in the right sequence. Measure your windows first, then select and purchase your replacement windows. Only after the new windows arrive should you remove your old windows.

Additional tips for how to measure windows include: Take all the window measurements from inside the home. If you only measure to the sash stops and the interior trim of the windowsill, the new window will be too small.

Accuracy is key — this will allow for a proper window installation, and help to maximize energy savings. Once the new window is in place, be sure the window is square — the window frame should sit perfectly square with the sides straight

These basic guidelines are based on the installation of a typical replacement various window frame.