Alpha Solway Disposable RPE - Designed to Fit.

Why Alpha Solway Disposable RPE? – What the Fit Testers say! “The Alpha Solway 3030V and Alpha S have proved to provide the best disposable respirator results”. “Our 14 years of experience shows this to be the best we have come across". WeFit RPE Ltd. "We are particularly impressed with the Alpha Solway FFP3 8030v disposable mask, the quality is much better than many others we have tried”. “Most importantly the orange Alphamesh 8030V has a 100% success rate with fit testing- no others on the market have matched this within the 5 years we have been fit testing!“ SATS-Site Assessment & Training Services Ltd. "Having performed countless fit tests with most of the brands and types of tight fitting RPE available on the market, I have concluded that the Alpha Solway 3030V provides the best fit test performance of any disposable respirator I have tested". Panoramic Safety Services.

Introduction Designed to pass stringent Face Fit tests as required by the COSHH Regulations. Meets the latest standards EN149: A1:2009. Incorporates innovative design features for enhanced comfort and protection. A wide choice of particulate respirators;FFP1, FFP2 and FFP3 + Nuisance odour/Welding versions. Unrivalled service and support. Over 30 years of disposable RPE development. Over 200 years PPE expertise. Reliable Protection from Particulate Hazards Lightweight and Comfortable Outstanding fit Value for Money

Levels of Protection The Alpha Solway range of disposable dust respirators provide protection against dusts, mists, fumes, fibres and airborne microbials. FFP1FFP2FFP3 Welding & Nuisance odour Respirators Assigned Protection Factor APF 4APF 10APF 20APF 10 Example Applications Low level dust concentrations. Oil or water based mists. Dust generated from sweeping, sanding, sawing, cutting and drilling etc. Moderate levels of fine dust/oil based mists. Hazardous dust from woodworking, plastering, powder coating, sanding, cement, brickwork etc. Higher concentrations of fine/toxic dust/mists/fumes and microbiological hazards such as airborne pathogens. Suitable for fine dusts and oil/water based mists and for protection from nuisance odours in metal fume and welding

The 8000 Series alphamesh shell overcomes collapse and prevents dirt, oil and grease from clogging the main filter. Available as FFP1 to FFP3 versions + welding version (8020CV). Maintains shape when in use even in damp, warm and humid conditions. Pre-formed nose bridge - does not require regular adjustment. Wide continuous loop head strap - easy donning and comfortable secure fit. Soft foam inner face seal for greater comfort and fit. (FFP2 and FFP3 versions). Ideal for those involved in strenuous manual work activity. Large filter surface area - reduces breathing resistance. Colour coding ensures level of protection can be seen at a glance from a distance. Approved to EN149:2001 +A1:2009

The 3000 Series Excellent in fit tests. Electrostatic filter for low breathing resistance. Lightweight outer shell maintains excellent shape. Continuous loop head strap for easy donning with four point adjustment. Pre-formed nose bridge - does not require regular adjustment. Full soft inner face seal on 3030V version. Available as FFP1 to FFP3 versions. Approved to EN149:2001 +A1:2009

The C Series Twin Fold design - flexes whilst talking to maintain seal and enables easy storage in a pocket. Soft lightweight fabric provides comfortable face seal. Large surface area of filter media lowers breathing resistance. Colour coded filter media for ease of identification. New low resistance valve for reduced heat and moisture build up. Available from FFP1 to FFP3. Approved to EN149:2001 +A1:

The 9000 Series Lightweight cup shaped respirator offering excellent value. Soft inner nose seal and low profile valve. Range tested to Dolomite test (D) for anti- clogging. Adjustable metal nose clip. Available as FFP1 to FFP3 versions + welding version (9020W) Approved to EN149:2001 +A1:2009

The Alpha S Designed to ensure an excellent fit for the smaller face. Unique full inner face seal. Four point head strap adjustment. Preformed nose bridge for good fit without need for regular adjustment. Exceptional low breathing resistance. Exhalation valve to allow warm exhaled air to escape for added comfort. FFP3 only – highest level of protection. Approved to EN149:2001 +A1:

The Alphamesh A series Vertical fold flat can be carried in pocket when not in use. Individually packed for hygiene. Pre-formed nose bridge for good fit. alphamesh shell to overcome collapse and to prevent dirt, oil and grease from clogging the main filter. Low profile valve to reduce heat and moisture build up within the respirator. Wide continuous loop head strap with adjustment. Available as FFP1 to FFP3 versions + welding version (A2CV) Approved to EN149:2001 +A1:2009

The E series Horizontal style fold flat respirator, can be carried in pocket and easily stored. Continuous loop head strap for easy donning. Colour coded nose bridge clips for easy identification. Range tested to Dolomite test (D) for anti- clogging. Large surface area of filter media for low breathing resistance. Available as FFP1 to FFP3 versions + Welding version (E2CV) Approved to EN149:2001 +A1:

Alpha Solway Disposable RPE Designed to Fit. Search: Alpha Solway