When you open the slide show you will see the following dialog box asking do you want to activate the clicker session. Select YES. Starting the Clicker Session

The PRS [Personal Response System] assessment application will now load. This application will record the session for review and reporting. Starting the Clicker Session

The assessment application will take a moment to load the class session. Starting the Clicker Session

The Start IR class dialog box will display with the assessment application behind it. A generic class has been setup for each room using clickers. Here we see CAT- CL1111 [Center for Advanced Technology Class Click OK. Starting the RF Clicker Session

The new session dialog box will appear and at the lower portion of the page the RF [Radio Frequency] receiver will begin to search for a channel for the class. The channel that is selected will be different each day in each room. Everything is preset on the new sessions dialog box. Just click OK. Starting the RF Clicker Session

Once the assessment application is fully loaded the PowerPoint presentation will open. You will see a small Interwrite button at the upper left corner of the presentation. You can click on this button to open the assessment title bar or it will automatically open when a question slide comes up. Starting the Clicker Session

Once you have opened the PowerPoint presentation, have the students turn on the clickers by pressing the power button. A green light will come on to indicate the clicker is powered on. Students will then use the appropriate letter or number button on the clicker to answer questions. Remember they must point the clicker at the receiver as they do this.

The assessment title bar will open and show the channel the students will need to enter in the clicker. The channel selection is the letter or number between the <> brackets. In this example D is the channel the students will enter with the clicker. At the title page of the slide have the students turn on their clickers. Starting the RF Clicker Session

On/OffEnter Key Letter and Number answer keys True/False selection keys Once the students turn on the clicker the screen will change to say Finding Class CAT –CL 1111 followed by a number. Each student should select the channel letter or number shown in the previous screen and press enter and wait a moment. Starting the RF Clicker Session

Once the clicker has accepted the channel number or letter for the class session it will display “Enter Student ID”. Each student should be given a number or sequence of letters (perhaps their initials) to use for their identification. Have each student enter this information with the letter or number keys on the clicker then press ENTER. The clicker will accept the ID and display ANS: ready for them to select an answer. Enter Key Starting the RF Clicker Session

As students join the class session with the clickers you will see the number of students in the Joined box change. Once the entire class has joined you are ready to move through your slide presentation. Starting the RF Clicker Session