Substrate Identification Floors. Principal Substrates T & G floorboards Flooring grade boards Concrete Screeded concrete Tile Backer Boards Under Floor/Under.

Slides:

Advertisements

Similar presentations

Single Coat 100% Solids Tank Linings SPECIALTY POLYMER COATINGS, INC. Single Coat 100% Solids Tank Linings.

Advertisements

NGfL CYMRU GCaD FLOOR COVERINGS.

DECORATIVE SINGLE COAT PLASTER FOR MARBLE CHIPS CLADDING SYSTEM ( PEBBLEDASH )

INTERNAL PLASTERING.

NGfL CYMRU GCaD FLOOR SCREEDING, PLASTERING AND RENDERING.

Subfloor Evaluation Prior to Installation Understanding the science of concrete slabs prior to installation of moisture sensitive floor covering materials.

Floors construction After the foundations have been completed and the external walls constructed the construction of the floors commences.

Using Body Fillers Description and Application. History of fillers Lead was the filler of choice through the 1950’s The early 50’s seen the the first.

Producing Plaster Components Casting a plaster slab.

BondChem TECHNICAL DATA Roll-a-crete ( Three Component Cementitious Waterproof Coating ) Page 1 / 2. DESCRIPTION BondChem’s Roll-a-crete is a three component.

Wet Area Linings Part 3 – Flooring & Other Details M. Martin Feb, 2005 Reviewed Feb, 2006 & 2007 M. Martin Feb, 2005 Reviewed Feb, 2006 & 2007.

RENAISSANC E CARPET TILES_.  INTRODUCTION_  BENEFITS_  SUGGESTED SPECIFICATION_  INSTALLATION INSTRUCTIONS_  MAINTENANCE PROCEDURES_  TECHNICAL.

FLOORS CONSTRUCTION After the foundations have been completed and the external walls constructed the construction of the floors commences.

Joining Techniques To understand which adhesive(s) is the most suitable for joining like and unlike materials To understand the advantages and disadvantages.

Unit 6: Building Technology in Construction Learning Outcome Understand the techniques used in the construction of superstructures for low-rise domestic.

Basic Slide Show Under Tile Spooled Heating Installation Guide.

COMPACT SHEETING SARLON COMPACT UNI. INTRODUCTION  Compact vinyl flooring contribute to lowering noise disturbance within a building in a number of ways.

Set Mat DIY Installation instructions Beautifully warm floors for New Homes and Renovations Tiles: Granite: Marble: Parquet: Vinyl: Cork: Included in each.

COMPACT SHEETING ETERNAL MARBLE. INTRODUCTION  Eternal is a compact heterogeneous vinyl floor covering with a calendared backing in 2m wide sheeting.

COMPACT SHEETING SURESTEP STAR. INTRODUCTION  Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm.

STATIC CONTROL TILES & SHEETING PRIMO SD. INTRODUCTION  Static Dissipative flooring is essential for protecting sensitive equipment from static charge.

2016 SUBSTRATE PREPARATIONS. SUBSTRATE PREPARATION METHODS FOR CONCRETE Very Course Profile Scabbling – Suitable for very aged, weak or contaminated substrates.

HOMOGENEOUS VINYL TILES FLOORFLEX. INTRODUCTION  Homogeneous vinyl flooring has a uniform structure and composition from the top to the bottom as there.

Woods joints are often glued to make them permanent. The strength of the joint depends on the marking out and cutting (accuracy)

1 Day Product Training Course. How to choose a Tile Adhesive or Grout Type of tile Substrate Service Condition.

2010 Product Awareness Floor Tiling. Weber.set rapid plus Uses: For fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior.

2010 Product Awareness Wall Tiling. Weber.fix Uses Interior walls Suitable for use in dry and lightly wet areas Features and benefits Non slip Low colour.

Substrate Identification Wall Tiling. Principal Wall Substrates Cement/sand rendering Gypsum plaster Plasterboard Existing tiling Timber based boards.

Create decorative backsplashes, accent walls, or other focal points

Weber Tile Fixing.

SURESTEP ORIGINAL COMPACT SHEETING.

Solution to site problems

Beyem Fir White Enhanced cement based tile adhesive for interior use

SARLON TRAFIC WOOD ACOUSTIC SHEETING.

SUPERFLEX HOMOGENEOUS VINYL TILES & SHEETING.

Set Mat DIY Installation instructions

Applying Paints and Enamels

Innovative roof cool roofs by T.Maniammai & T.M.Supraja

Global Exotics Board Replacement

ETERNAL SAND COMPACT SHEETING.

INDUSTRIAL FLOOR HOMOGENEOUS VINYL SHEETING.

VINYL TILES & SHEETING_

ETERNAL STONE COMPACT SHEETING.

SARLON TRAFIC FLASH CODE XXL ACOUSTIC SHEETING.

WALLCLADDING SHEETING_

FLOORWORX SD STATIC CONTROL TILES & SHEETING.

ETERNAL SMARAGD COMPACT SHEETING.

GLAZING Ceramics.

StressPly® SA FR Mineral System

Ag Structures Mr. Dieckhoff

Interior Finishes and Detailing

Tapiflex Self-adhesive

Building Construction I Sofia Sebastian 1

Building Construction I Sofia Sebastian 1

Introduction to Weber Tile Fixing Products.

CANVAS PUR HOMOGENEOUS VINYL SHEETING.

SARLON TRAFIC CODE BARRES XXL ACOUSTIC SHEETING.

Floor screeding.

SARLON TRAFIC VISION 3D ACOUSTIC SHEETING.

Student: xxxxxxxxx AEC 204 Lab December 5, 2006

ETERNAL PALETTE COMPACT SHEETING.

SARLON TRAFIC CRISTAL ACOUSTIC SHEETING.

RISER PROJECT F bathroom.

C bathroom/AB and B Kitchens

M4 & M6 Squirrel® Fixings Installation Guide

SARLON TRAFIC CODE ZERO XXL ACOUSTIC SHEETING.

PIR Insulation to achieve required

Existing deck/substrate prepared and primed in strict accordance with LIQUIFLEX Project Specification PROVAP S/A Vapour Control Layer (where required)

Presentation transcript:

Substrate Identification Floors

Principal Substrates T & G floorboards Flooring grade boards Concrete Screeded concrete Tile Backer Boards Under Floor/Under Tile Heating Anhydrite

Minor Substrates Existing ceramic tiles Vinyl tiles Steel Fibre Glass

Preparation Floors

T & G Floorboards Check strength of floor Check ventilation Stiffen with extra noggins Screwed down every 300mm

Overlay Boards WBP 15-18mm 0.5 to 1.5mm gap between 300mm centres Brick bond

Concrete Ideal background Allow 6 weeks drying time

Sand and Cement Screed Ideal background 1 :3 / 4 cement to sand Allow 3 weeks drying time

Wedi Boards Tile Backer Boards No drying time Impervious to water Can over board with 6mm with manufacture screws and washers also put down with thin bed of adhesive

Wedi Boards Tile Backer Boards Excellent insulation properties for under tile heating Quick and easy to install Lay brick bond effect

Under Tile Heating Substrate must be clean and dust free Preferably use construction boards for insulation Test heating before tiling checking it works and turn off and allow to cool

Under Tile Heating Cover cables with weber floor flex levelling compound until the warming elements are covered at least 3mm thick Keep heating off for at least 5 days and then gradually bring the system up to its operating temperature over a few days Video

Heated Screeds When screed is fully dry test under floor heating system (normally about 3 weeks) Turn on at 5 degrees a day up to 45 degrees Run at full temperature for 3 days Allow to cool to 15 degrees

Heated Screeds Using a de-coupling membrane is highly recommended Once tiled switch heating on after 5 days gradually raising the temperature by 5°C/day

Anhydrite Screed Water sensitive Remove weak layer Prime with acrylic primer Video

Minor Substrates Preparation

Vinyl Tiles Remove any loose tiles. Make sure existing tiles securely fixed Don’t tile onto sheet vinyl Make sure tiles are clean (use sugar soap) Can prime for better adhesion Use Highly Polymer modified adhesive

Steel It is not suitable to tile on external steel work If tiling on to internal steel work, you must ensure that the surface is free from grease & rust.

Steel The surface must be primed with a suitable rust inhibiting primer. It is not recommended to use large format tiles Use 2 part adhesive or epoxy

Fibre Glass Must be rigid Allow new GRP to cure for 4 weeks Surface must be clean, dry and free from grease Lightly abrade the surface and remove dust to improve key Use 2 part Adhesive or weber.set pro lite rapid

Adhesive Choice