APMP TCFF meeting 2011 Updates for National Metrology Centre of A*STAR Wu Jian National Metrology Centre A*STAR 7 July 2011.

Slides:



Advertisements
Similar presentations
INDUSTRIAL HYGIENE - PRINCIPLES AND INSTRUMENTATION FOR CALIBRATING AIR SAMPLING EQUIPMENT UNIVERSITY OF HOUSTON - CLEAR LAKE.
Advertisements

UNIVERSITY OF HOUSTON - CLEAR LAKE SPRING 2015
Flow Measurement by Ashfaq Md. Ansery.
1 Developments in Metrology Ed W.B. de Leer NMi Van Swinden Laboratorium The Netherlands UNECE WP.6 Presentation 24 november 2004.
CMCs and the BIPM Key Comparison Database Raul Fernando Solís Betancur 2015.
Selection of measuring instruments
Wind Instrument Testing Apparatus Project WITAP Team: Rob Koch Andy Lawrence.
Flow Measurement.
Volume Flow Measurements. Obstruction Meters u Orifice Meters u Venturi Meters u Flow Nozzles.
A. F 2 > F 1 > F 3 B. F 2 > F 1 = F 3 C. F 3 > F 2 > F 1 D. F 3 > F 1 > F 2 E. F 1 = F 2 = F 3 Rank in order, from largest to smallest, the magnitudes.
Process Variables and Sensors. Parts and materials needed for today (instructor will provide): DP transmitters Thermocouples Filled-bulb temperature sensor.
1 Practical Interpretation of Unbroken Chain in Metrological Traceability as to VIM 3 Center for Measurement Standards (CMS) Industrial Technology Research.
ACADs (08-006) Covered Keywords Flow rate, total flow, differential pressure, percent flow, cotameter, Bernouli. Description Supporting Material
Miruna DOBRE – SMD (Belgium) Stephanie BELL – NPL (United Kingdom) Dolores del CAMPO – CEM (Spain) Martti HEINONEN - MIKES (Finland)
© NMISA 2010 INTERNATIONAL ACTIVITIES AT THE NMISA HUMIDITY LABORATORY DURING 2009/2010 Deona Jonker.
Flow Measurements Identify an effect that depends on flowrate
EXPERIMENTAL CLASS 3. FLOW MEASUREMENT
Approach of a UK auditor Paul Mudway Mudway Health, Safety & Environment.
Copyright ©2011 by Pearson Education, Inc. Upper Saddle River, New Jersey All rights reserved. Introduction to Engineering Experimentation, Third.
Principles of Technology Waxahachie High School Ratein Fluid Systems PIC Chapter 3.2 Ratein Fluid Systems PIC Chapter 3.2 PT TEKS.
FLOW MEASUREMENT TECHNIQUES
ME 322: Instrumentation Lecture 11 February 11, 2015 Professor Miles Greiner Pitot probe operation, non-linear transfer function, fluid density, uncertainty,
THERMAL ANEMOMETER MEASUREMENT The Kurz thermal anemometers use two RTDs, one heated 50 to 100’C above the ambient. The other monitors the ambient. The.
Leak tests G. Apeldoorn, P. Vankov , NIKHEF.
MECH 322 Instrumentation Lab 6 Fluid Speed and Volume Flow Rate Performed: February 27, 2007 Group 0 Miles Greiner Lab Instructors: Mithun Gudipati, Venkata.
ME 391 Instrumentation LAB #6 Volume Flow Rate and Centerline Speed in a Tube Wind Tunnel Performed: 03/05/2004 Soma: I believe I performed 50% of this.
Introduction to Fluid Mechanics
All-Russia D.I. Mendeleyev Scientific and Research Institute for Metrology (Vniim) (FGUP "D.I.Mendeleyev VNIIM") Konstantin Popov
Progress Report of NPLI Fluid Flow Measurement Standards Activity ( ) Shiv Kumar Jaiswal Senior Scientist Fluid Flow Measurement Standards (Apex.
CCM Working Group on CMCs 1 Report on 11 May 2011 meeting of CCM-WGCMC & on Related Issues Chris Sutton, Chair Measurement Standards Laboratory of New.
Byong Guk Jeon, Ho Sik Kim NQe 401 Exp. 3 Flow measurement.
Phil. U., M Eng Dep., Measurements, Chap#7 flow measurements is very important as it covers wide ranges of applications. The flow rate measurement devices.
APMP TCFF Country Report CMS/ITRI, Chinese Taipei Chun-Min Su, Ph.D. Dec. 5, 2011 Kobe, Japan.
S.N. PATEL INSTITUTE OF TECHNOLOGY AND RESEARCH CENTER TOPIC : MEASURMENT OF FLOW GUIDED BY : Mr. Nirav Raykundaliya 1 Sr. no. NamePEN 1Kaliyani Vishal
APMP TCFF Workshop Nov. 22, Investigation on calibration of fuel ethanol flow meters Takashi Shimada, Ryouji Doihara, Noriyuki Fuiichi, Yoshiya.
Instrumentation I - Session 3 Session 03 - Agenda ActivityEst. Time, min 1. Agenda 2. Review Test #1 3. Learning Objectives - Level 4. Introduction to.
APLMF 12 VOLUME AND FLOW LABORATORY OF VMI APPLYING PROCESS FOR CMC Dr Nguyen Hong Thai Volume and Flow Lab- VMI 6/25/
APMP TC Fluid Flow Initiative Project Traceability Scheme Study for LPG Metering Final Report at APMP 2012 TCFF Meeting Chun-Min Su CMS/ITRI, Chinese Taipei.
Project DUNAMET no. D36 Tomáš Valenta Czech Metrology Institute.
MEASUREMENT S.I. UNITS system International units A modification of the older French metric system.
DYNAMICAL EFFECTS in EXPANDING VOLUME FLOW CALIBRATORS Thomas O. Maginnis, Ph.D. CELERITY GROUP, Unit Instruments Division 2002 NCSL International Workshop.
1 Sensors and Transducers. 2 Physical Process Measurand Signal variable Display X S Measurement M Simple Instrument Model Physical Measurement variable.
APMP TC Fluid Flow Initiative Project Traceability Scheme Study for LPG Metering Progress Report at APMP 2011 TCFF Meeting Chun-Min Su, Ph.D. Center for.
UNDERSTANDING DIFFERENT
Review protocol for Fluid Flow Calibration and Measurement Capabilities (CMCs) Draft A (Oct. 2013) Nov. 25, 2013 Yong Moon CHOI Fluid Flow Center of KRISS.
Process Control Instrumentation I - Session 3. Most Common Control Elements.
PRESENTATION ON MEASUREMENT OF FLUID VELOCITY Submitted by:  Prativa Giri (072bme628)  Sutishna Pokharel(072bme646)
Asia-Pacific Metrology Programme
Process Variables, Elements and Instruments – Flow - Agenda
Figure 10.1 Flow in a duct with area change.
Introduction of Liquid Flow Standards Section Fluid Flow Division National Metrology Institute of Japan (NMIJ)
CENTRE OF EXCELLENCE (CHEMICAL SECTOR)
Capability Improvements of the NMISA Humidity Laboratory
Lab Report MENG Tao Tsukuba 20,Oct.,2011
CMC Submission and Reviewing Process
LAB #6 Volume Flow Rate and Centerline Speed in a Tube Wind Tunnel
SIM WG10 brief report of activities
S. Ghosh, M. Muste, M. Marquardt, F. Stern
REPORT OF RECENT ACTIVIES
Measuring Flow ACADs (08-006) Covered Keywords
Prepared by: Hamidreza Karamouz
CMC submission from A to Z
TC-Flow 2014/2015 Activities and Highlights
قياس معدل سريان الموائع Fluid Flow Rate Measurement
Report from TCFF kyung-Am Park TCFF Chair
Status Report of the CCM KCs
Measuring Fluid Flow Rate,
Rifat Kangi Bled, Slovenia
Intercomparison on Personal Dose Equivalent (Hp(10))
Introduction to Fluid Mechanics
Presentation transcript:

APMP TCFF meeting 2011 Updates for National Metrology Centre of A*STAR Wu Jian National Metrology Centre A*STAR 7 July 2011

2 Fluid Flow Measurement Capability

3 Bell prover standard Piston prover standard Gas Flow Standards QuantitiesGas Flow QuantityVolume gas flow rate Mass gas flow rate Measurement range 1.70 × dm 3 /s to 19.0 dm 3 /s 2.00 × g/s to 23.0 g/s Measurement uncertainty 0.7% Capable to calibrate Thermal mass flow meter Positive displacement rotameter Turbine meter etc

4 Primary Air Velocity Standard

5 DANTEC, FlowLite Wavelength of 532 nm Continuous output power of 200 mW Primary Air Velocity Standard QuantitiesAir Velocity Unitm/s Measurement range 0.2 m/s to 60 m/s Measurement uncertainty 0.05 m/s to 0.5 m/s Capable to calibrate Air velocity standards Thermal anemometer Fan type Pitot tubes etc

6 The constant pressure method Working Principle: Participate the CCM.P.K12 leak rate comparison at 2009 Primary Leak Standard

Bunkering Metering System

FieldsReviewerAffiliationDate Fluid flowDr Yoshiya TeraoNMIJ Apr 2010 CMC Peer Reviews QS assessment – SAC-SINGLAS

Fluid Flow CMC - April 2010

Calibration or Measurement Service Measurand Level or Range Measurement Conditions/Independent Variable Expanded Uncertainty Reference Standard used in calibration Comme nts Administration ClassInstrument or Artifact Instrument Type or Method Minimu m value Maximu m value Units Paramete r SpecificationsValueUnits Cover age Factor Level of Confide nce Is the source of expanded uncertainty a relative one? Source of traceability NMI Service Identifier Service Category NMI Revi ew Stat us Revie w Com ment s Mass Gas Flow RateGas flowmeters (e.g. thermal mass flow meter, positive displacement, rotameter, turbine meter etc.) 2.0E-051.0E+00g/sNitrogen ambient conditions p,t 7.0E-01%295%YesA*STAR A*STAR Mass Gas Flow RateGas flowmeters e.g. thermal mass flow meter, positive displacement, rotameter, turbine meter etc. 1.0E+002.3E+01g/sDry air ambient conditions p,t 7.0E-01%295%YesA*STAR A*STAR Volume Gas Flow Rate (Gas flowmeters) e.g. thermal mass flow meter, positive displacement, rotameter, turbine meter etc. 1.7E-028.3E+02cm³/sNitrogen ambient conditions p,t 7.0E-01%295%YesA*STAR A*STAR Volume Gas Flow Rate Gas flowmeters e.g. thermal mass flow meter, positive displacement, rotameter, turbine meter etc. 8.3E-011.9E+01dm³/sDry air ambient conditions p,t 7.0E-01%295%YesA*STAR A*STAR Air SpeedLAD & WindtunnelAnemometers2.0E-011.0E+00m/sAir ambient conditions p,t 8.5E-02m/s295%YesA*STAR A*STAR Air SpeedLAD & WindtunnelAnemometers1.0E+001.0E+01m/sAir ambient conditions p,t 8.9E-01%2`YesA*STAR A*STAR Air SpeedLAD & WindtunnelAnemometers1.0E+016.0E+01m/sAir ambient conditions p,t 7.1E-01%295%YesA*STAR A*STAR CMC of Fluid Flow

Thank you!