Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Flow loop schematic. Symbols ρ, m, T, and WC stand for measured density, mass flow rate, temperature, and water-cut, respectively, while subscripts W and MO stand for water and mixed oil, respectively. The water line has a single Coriolis meter, while the oil line has a Coriolis meter and a Drexelbrook probe. Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Oil and water holding tanks and pump layout at the TUFFP flow loop Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Differences in flow profiles in the absence and presence of a dynamic mixer Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Sound speeds and densities measured in the single phase crude oil (subscript o) and water (subscript w) samples as a function of temperature Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Comparison of calculated water-cuts by weight from upstream Coriolis meters (1 – φloopcorr) and LANL meter (1 – φm) in typical test runs Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Measured fluid temperatures during typical test runs Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Measurement error due to undertainties in independent variables Figure Legend:
Date of download: 9/19/2016 Copyright © ASME. All rights reserved. From: Mass Fraction Measurements in Controlled Oil-Water Flows Using Noninvasive Ultrasonic Sensors J. Fluids Eng. 2014;136(3): doi: / Distribution of Monte Carlo trial runs for three different water-cut scenarios Figure Legend: