HOW TO USE UNIVIEW PRODUCT-IPC

1.1 How to do with no live video for IPC Q: How to do with black screen and no stream on IPC web live menu A: Check if open the live stream on the IPC’s live view menu

Q: How to do with black screen and no stream on IPC web live menu A:Collect IPC’s diagnosis info, search {ISP VIU} filed 22: ISP, VIU 2. There is 2 times of prints for this field, the value in red will be increasing normally 3. If the values of the 2 prints stay the same or stay 0 after restart, then ensure that there is problem with sensor connectors 4. Try to upgrade to the latest version. 5. Open the device, make sure if the FFC cable is loose, try to re-plugin, if still not work, need replacement. The corrected diagnosis info: Open diagnosis info to search 【 ISP ， VIU 】 fields ；

Found the printed value stayed as 0, ensure that the sensor connectors has problem, if can not be fixed by upgrade or re-plugin the FFC cable, it need to be replaced.

1.2 How to upgrade IPC by serial port IPC baud rate: The way to enter uboot mode Connect the device by serial port, Run SecureCRT, long press Ctrl+B under connecting the serial port when power the device IP setting under uboot 1. Setting device IP setenv ipaddr xx.xx.xx.xx 2. Setting tftp server IP(pc local IP) setenv serverip xx.xx.xx.xx 3. Setting device mac address config ethaddr xx:xx:xx:xx:xx:xx 4.Save values Saveenv

Make sure the PC can ping device(using ping xx.xx.xx.xx under uboot to test) Upgrade u-boot update u-boot Upgrade uimage.bin & program.bin update all Upgrade uimage.bin individually update uimage 4. Upgrade program.bin individually update program 5. Delete uboot value update env E.g: update -tftp all -f Reset after upgrade

1.3 How to use HTTPS Private Certificate 1.Enter Network-HTTPS, choose “Create” to create certificate

2. Shows below, fill in the previous 3 columns mainly, press ok to create the certificate

2. 3. Turn it on, save it, the HTTPS is enabled

4. Now you can enter in the browser with encryptionhttps://IP 5. Due to the browser can not recognize it at the first time, the browser will notify you that it has problem, you need to click continue to go to the next

6. You can see the certificate error in the browser, click it to show. 7. Click to check the certificate info, you can install the certificate created by the device for next login properly

8. Install the certificate to trusted root certificate certification authority storage area

Certificate Request 1.Choose “Request” and click “Create” to create certificate 2. Fill in the requested info, same as previous, fill in “Zhejiang” in “Province/State” for test

3. Click ”OK” to create corresponding certificate request, no need to click “Download” to download 4.Signature on CA after download, then import to the device 5.Import the installed certificate to the device, now you can use https Note: When install the certificate, please reopen the IE, or it may happen that the certificate has an error notice on browser

1.4 How to use two-way audio Two way audio between IPC and PC ： 1.Make sure that IPC and audio input is connected correctly. In the IPC configuration, the audio input should be enabled. 2. IPC audio output interface should connect a headphone. Press the two-way talk button like below snapshot:

3. Test whether the two way audio is working fine Two way audio between NVR and IPC 1.Enable the audio input in IPC configuration. 2.Connect the IPC to the NVR. Make sure that audio input and audio out interface is connected correctly. 3.Enable two way audio button in NVR(web) Or Press the “Start Talk” button in NVR GUI.

1.5 IPC multicast guide Case 1 ， By Media stream find “Media Stream” ， then fill IP address(for Multicast) and Port as follow steps. Get URL(1) ：

Case 2 ， By RTSP Multicast Address find “Media Stream” -“RTSP Multicast Address” menu ， then fill IP address(for Multicast) and Port as follow steps. “Main” ”Sub” ”Third” mean their related streams. Get URL(2) ：

Case 3 ， refer to the local IP directly Get URL(3) ： rtsp:// /media/vedio1/multicast

Notice ： Range of Multicast IP Address ： ~ Range of Port ： 0~65535 View Streams by VLC Open VLC ， enter “Media”—“Open network stream” ， fill URL(1) or URL(2) or URL(3) Notice ： If the Authentication page appear, please fill username and password of IPC.

1.6 IPC telnet upgrade 1.Set tftp server in your PC ， make sure connection is good between PC and device （ for this test IP of IPC: ， IP of PC ： ） 2. uncompress the upgrade file in the tftp folder: E:MyDrivers 3. telnet to IPC （ username ： root password ： uniview ） 4. upgrade ： update -ftp all -f 5. wait until it reboot, then login via web.

1.7 Solutions of IPC fail to be ping Check whether the power supply and network connection are normal A.Check whether the device has been powered on successfully, including whether the voltage and rated current of the adapter meet the needs of the equipment; B. Check whether the network interface lights of the IPC perform normally. ( green light is on all the time, yellow light is twinkling).If there is no lights, pls check the network interface lights of the switch or PC which connected to the IPC; C. Get another device (same model and works normally) to run with the same condition. If it can run normally, you can eliminate the power supply and network connection problems; Under the premise of power supply and network connection normal, you can get the IP address of the IPC as follows: A.Connect the IPC to PC directly, then search the IPC via EZTools after the IPC has been powered on for 10 minutes,; B. Connect the IPC to PC directly, capture via the wireshark, Filter: arp.isgratuitous == 1 Then power off and restart the IPC, check whether there is any arp broadcast message within 10 minutes.

IF the device still cannot be ping after all the above solutions, we will send you a spare part and contact with the R&D for further analysis.

1.8 Switch scenes settings In the Scenes forms, customers could set Default Scene and customized scenes. Default Scene offers 6 modes containing Custom, Indoor, Common, License Plate, Objective, High Photographic.

1.8 Switch scenes settings custom: customize the scenes by schedule and illumination (with the picture below in details p3) Indoor: recommended for indoor scenes Common: recommended for outdoor scenes License Plate: recommended for plate snapshot on roads Objective: recommended for static scenes Highlight Photographic: recommended for scenes with low light

There are three ways to set the auto switching criteria. As the following picture see You can only set a time schedule to switch the scenes; You can also only set the illumination range to switch scenes; 3. You can set both the valid time range and illumination range, in this way, the Auto switching occurs only when the illumination range is covered in the valid time range. We recommend you that use the NO.1 way to switch scenes,because this way is more simple than others. After configuring a schedule successfully, you have to choose 【 Enable Auto Switching 】. If you have any problems, please contact us.

1.9 How to use power output function Some IPCs support Power output function, how to configure the settings to implement this function. 1.Power the IPC through POE port. 2.Enable the DV12V output function on IPC’s web interface. As the picture shown: 3.Use this IPC’s external DC12V –IN port to power another IPC.

1.9 How to configure IPC server: server address (we can use the domain name also). Port: Different server should use different port. Most of the time, the port is 25 or 465 or 587. Authentication: Actually it is the login process. User name should be the address and password should be the password. SSL ： Enable SSL encryption. ( some should use the SSL, such as gmail and homail) Sender name: Just show the sender’s name. Sender address: the will be sent from this address. Receiver address: the will be sent alarm information to this address. We can configure 10 receiver address at most. Common use with its server address and port

SMTP Server addressPort sina.comsmtp.sina.com.cn25 sina.cnsmtp.sina.com.cn25 sinaVIPsmtp.vip.sina.com25 sohu.comsmtp.sohu.com25 126smtp.126.com25 139SMTP.139.com25 163smtp.163.com25 QQsmtp.qq.com25 HotMailsmtp.live.com587 gmail(google.com)smtp.gmail.com587(SSL enable) 263.netsmtp.263.net net.cnsmtp.263.net.cn25 x263.netsmtp.x263.net25 21cn.comsmtp.21cn.com25 FoxmailSMTP.foxmail.com25 China.comsmtp.china.com25 Tom.comsmtp.tom.com25

configuration example Sina server configuration server ： smtp.sina.com Port ： 25 or 587 A:Port 25 & SSL disable B:Port 25 & SSL enable

C:Port 587 & SSL disable Port 587 & SSL enable

E:Test result ： HotMail server configuration server ： smtp.live.com Port: 25 or 587 A.Port 25 & SSL disable B:Port 587 & SSL enable

C:Test result. Make sure all the server address and port is OK Test through telnet, like: telnet smtp.qq.com 25 If the server and port is not OK, you will see like below snapshot: