USING COMPARATING TOOL AND BASIC MEASURING TOOL Basic Competence Maintaining comparing tool and/or basic measuring tool Oleh: Hettyk Ratnasari

SAVE OF MEASURING TOOL 1.Tool function 2.Tool type 3.Tool dimension

THE WAY OF STOTAGE The way of storage: 1.Keep in cupboard and grouped into one type 2.The most precision tool is placed on the upest place

THE WAY OF STORAGE The example of tools storage order 1.Micrometer 2.Vernier caliper 3.Steel Ruler 4.Checker

THE STORAGE OF 1 SET OF ANGLE MEASURE BLOCK

THE STORAGE OF MEASURE BLOCK TOOLS

THE STORAGE OF 1 SET OF MEASURING BLOCK

THE MAINTENANCE OF MEASURING TOOLS Micrometer 1.Avoid from hard collision or fall 2.do not move the measure axis by turning crossbar or measure base

THE MAINTENANCE OF MEASURING TOOLS 1.Clean dust/dirt on measure axis and the other parts with clean and smooth cloth before and after usage 2.Lubricate with lubricating oil the part of measure axis and the others 3.Good storage is to free from direct sunshine, high humidity and dirt

1.Vernier caliper 2.Avoid from hard collision or fall 3.The edges of measure jaw and the sides must be preserved from damage 4.Clean dust/dirt with clean and smooth cloth before and after usage 5.lubricate the slider surface and the other parts with lubricating oil after usage 6.Good storage is to free from direct sunshine, high humidity and dirt THE MAINTENANCE OF MEASURING TOOLS

Angle 1.Lubricate hinge and other parts that frictioning 2.avoid from collision which can damage the measure sides

1.Do not drop dial indicator or feel hard collision 2.Clean dust or dirt from groper axis or crossbar before and after usage THE MAINTENANCE OF MEASURING TOOLS

1.Do not lubricate groper axis with oil so dust will not adhere 2.be careful in moving groper axis, do not make hitch 3.store dial indicator safely avoid from direct sunshine, high humidity and dust or dirt THE MAINTENANCE OF MEASURING TOOLS

The prime maintenance for mals is keeping from rust and the damage of check area THE MAINTENANCE OF MEASURING TOOLS

DAFTAR PUSTAKA Solih Rohyana,Drs Menggunakan Alat Ukur SMK. Armico. Bandung. S.M Soetarto Teknik Pengukuran (Metrologi Industri). Depdikbud Direktorat Pendidikan Menengah Kejuruan. Jakarta Arifin, Syamsul Alat-alat Ukur dan Mesin-mesin Perkakas. Ghalia Indonesia : Jakarta Kusdi Teknik Pengukuran I. IKIP Malang : Malang Surbakty, B Ketrampilan Dasar Kerja Bangku. PT (Persero) Karya Nusantara : Jakarta