Fix HP “PSC 2410” Scanner Clicking/Grinding Noise Issues

As a user of HP “PSC 2410”, if you are facing scanner’s clicking/grinding noise while turning on the printer, and an hourglass us in the display on the printer, then there can be several reason behind the problems mentioned below. In order to overcome such problems you better take help by the experts by contacting on HP scanner helpline number. Broken Scanner Head- If the scanner problems occur due the broken head is broken then it cannot move across the page. To overcome the problem replacement of the scanner head is the best option.

Dirty scanner glass- The other main reason behind the problems can be the dust under the scanner glass. For this the glass needs to be cleaned so that the scanner can perform accordingly. Dirty calibration strip- There is a calibration strip that is a white strip along the bottom of the scanner glass. If the strip is dirty then the scanner will not function properly. So to deal with the situation the better option is cleaning the calibration strip. Make sure when you clean the strip it should be done with the clean and soft cloth.

Broken scanner lamp- Replacing the scanner lamp is the best option to prevent your scanner from the crushing sound problem. The dim and burned scanner lamp is one of the main reasons behind the scanner crushing sound problems. Dirty scanner mirror- If you are using dirty scanner mirror then it can prevent the scanner to perform properly and correctly. In this case, the mirror will need to be properly cleaned.

Contact Details Visit Us /hp-scanner-support/ Call Us Toll Free :