How to sign up an Ezcloud account via EZView 1. Tap Menu and choose P2P Account and then Click Sign up.

How to sign up an Ezcloud account via EZView 2. Enter the email address and verify code and password to make a new ezcloud account. If you want to comfirm the password before the sign up, you can click the icon shown on the picture to check again

How to add a device on EZView 1. Tap Menu and choose Devices to enter the device menu. There are serveral ways to add the device, Auto search, manual Add and Scan once click the + icon. There are serveral ways to add the device, Auto search, manual Add and Scan once click the + icon.

How to add a device on EZView 2. Auto Search to add the device. 1.Pull down the device list to refresh, select the desired device(s) and tap Batch Add. 2.Enter the device username and password and tap Add. The result will be displayed. 3.For failed device(s), check that the username, password and device status are valid and try again. This method used for devices which in a same LAN network. If there are some devices fail to been added. Pls check that the username, password and device status are valid and try again.

How to add a device on EZView 3. Add the device Manually. There are three ways to add the device manually. P2P: Add the device that supports the P2P function (entering the registration code or scanning the QR code). IP/Domain: Add the device by entering the device IP or Domain. EZDDNS: Add the device by entering its domain name. The parameters explanataion: Scan: Aim your phone camera at the QR code and include it within the scanning box. Name: Enter the device name. Port: Enter the HTTP port number of the device. IP: Enter the IP address of the device. Registration code: The unique identification of the device. Username and password: Enter the username and password of the device. Live View: Choose the Clear/Balanced/Smooth stream for live view. Playback: Choose the Clear/Balanced/Smooth stream for playback. Server address: Choose a domain server address. Domain name: Enter the domain name of the device.

How to add a device on EZView 3.1 Add the device Manually—P2P Steps: Click Add By P2P and then click Scan or input the register code Click Scan to scanning the QR code which is printed on the box or under the mycloud menu. Input a name and then click Save or Start Live view. NOTE: This operation need to login you mycloud account firstly. The parameters explanataion: Scan: Aim your phone camera at the QR code and include it within the scanning box. Name: Enter the device name. Registration code: The unique identification of the device. Username and password: Enter the username and password of the device. Live View: Choose the Clear/Balanced/Smooth stream for live view. Playback: Choose the Clear/Balanced/Smooth stream for playback. NOTE: This operation need to login your mycloud account firstly.

How to add a device on EZView 3. 2 Add the device Manually—IP/Domain Steps: Choose the IP/Domain Input the device name and Address(IP or Domain name) and external HTTP port. Input the username and password Click Save or Start Live view. Note For this add method, you don’t need to login your mycloud firstly. The parameters explanataion: Name: Enter the device name. Port: Enter the HTTP port number of the device. Address: Enter the IP address or Domain name of the device. Username and password: Enter the username and password of the device. Live View: Choose the Clear/Balanced/Smooth stream for live view. Playback: Choose the Clear/Balanced/Smooth stream for playback. Note For this add method, you don’t need to login your mycloud account firstly.

How to add a device on EZView 3.3 Add the device Manually---EZDDNS Steps: Apply a Domain name on the device firstly and test successfully. Choose the add method to EZDDNS Input the device name and Domain Name, choose the server address is en.ezcloud.uniview.com Input the username and password 5. Click Save or Start Live View. The parameters explanataion: Name: Enter the device name. Username and password: Enter the username and password of the device. Live View: Choose the Clear/Balanced/Smooth stream for live view. Playback: Choose the Clear/Balanced/Smooth stream for playback. Server address: Choose a domain server address. Domain name: Enter the domain name of the device.

How to add a device on EZView 4. Scan the QR code to add the device. If you select Scan,aim your phone camera at the QR code and include it within the scanning box. Alternatively, tap to choose the picture of the QR code in your phone and it will be recognized automatically. This method is same as P2P, pls check the chapter 3.1 to know more detail.

How to add a device on EZView 5. Check the device list.