Hytera DMR conventional repeater solution introduction

01 02 03 04 05 06 DMR introduction Products overview Product features Network topologies 05 Products comparison 06 Successful cases

01 DMR introduction

DMR standard What is DMR? Three tiers of DMR: Market tiers Consumer Commercial Low-tier Professional Mid-tier High-tier ETSI DMR Tier 1: unlicensed Tier 2: Licensed conventional Tier 3: Licensed trunking Market tiers ETSI standards Three tiers of DMR: •Tier1: low cost DPMR446, using license free frequency, facing civil market. Work under direct mode, using FDMA. •Tier2: facing professional market, work under direct/relay mode, using 2-time-slot TDMA. •Tier3: facing professional market, applied in trunking and simulcast system. Using 2-time-slot TDMA, supporting network management.

DMR standard TDMA - increased system capacity Today’s analog 2 Slots TDMA Slot 2 Slot 1 Regulatory emissions mask Slot 2 Slot 1 time Slot 2 Slot 1 frequency 12.5kHz Channel frequency 12.5kHz Channel 12.5kHz TDMA Divides existing channel into two timeslots Delivers twice the capacity through repeater Performance is same or better than 12.5kHz FDMA 1 repeater does work of 2 Reduced need for combining equipment Enables 40% increase in radio battery life 12.5kHz / 25 kHz 1 voice for each 12.5/ 25kHz channel 1 repeater for each channel

DMR standard TDMA - two repeaters in one TDMA saves licensing and equipment costs by enabling the equivalent of two 6.25 kHz channels within a single licensed 12.5 kHz channel. One call per repeater and channel Two-channel Analog or Digital FDMA System Combining equipment Frequency 1 Frequency 2 Two calls per repeater and channel Two-channel Digital TDMA System Frequency 1 Lower infrastructure cost, 1 box in rack TWO voice channels from one repeater

DMR standard improved digital audio quality Digital Audio Quality Excellent Area of improved performance Analog Audio quality Coverage Digital Audio Quality Minimal Acceptable Audio Quality Poor Strong Signal Strength Weak Clearer voice communications over a greater range Digital error-correction technology permits audio and digital communications with no loss Static and noise rejection Digital receivers reject any error signals, permitting improved audio in loud environments

02 Products overview

Conventional repeater products & markets Industry segments Solution and product Hospitality Emergency Enterprise Transportation Wall mount digital repeater RD62X Supermarket, Shopping mall, Hotel Portable digital repeater RD96X Public security, Construction, Forest management, Events Full power digital repeater RD98X Analog conventional repeater Digital conventional repeater Enterprise, Government. Events Super digital repeater RD98XS Upgrade to analog simulcast transceiver Upgrade to MPT trunking transceiver Upgrade to DMR trunking transceiver Public transportation, Utility, Professional carrier, Large enterprise

RD62X - Wall mount digital repeater Wall mount DMR/analog repeater All-in-one integrated solution * RF, PSU and Duplexer built in 25W 100% duty cycle Easy to wall mount AC/DC switch without breaking

conventional repeater modules RD62X - Wall Mount Digital Repeater Duplexer PSU RD62X RF conventional repeater modules

û RD62X - Wall mount digital repeater AC/DC switch without breaking Call 1 Call 1 RD62X AC/DC switch without breaking RD62X integrates power supply system internal that supports battery floating charge. If AC power interrupts, DC power (battery) could automatically take over without breaking.

RD96X - Portable digital repeater 16 channels RF output power 1 - 10W adjustable (UHF/VHF) 10 Ah Li-ion battery ; Battery life about 8 - 10 hours Rated audio output: 0.5W (remote speaker) IP67 and Compliant with MIL-STD-810 C/D/E/F/G Dimension: 280*170*40mm Weight: less than 3kg Interface and connector RJ45 IP interface, DB26, and 10pin accessory connector Built-in duplexer (optional) Internal GPS module(optional) Suitable for in-door coverage, man-pack and portable solutions

RD96X - Portable digital repeater RD96X backpack Built-in aluminum alloy frame, the backpack can be placed upright; Install / uninstall RD96X convenient; Humanization design for waist and shoulder position , Breathable fabric, ensure carry personnel body comfort; Small size, lightweight, only 1.6Kg; Bottom bag, it may put a battery or other spare articles

û RD96X - Portable digital repeater RD96X speaker & microphone Cost effective Lighter burden Easy Installation and usage Higher cost Heavy burden Hard to use

RD98X - Full power digital repeater Modularized design and large size color display 4 programmable buttons 50W High Power，External power amplifier to100W Build-in duplexer Multi-Level encryption（40,128,256bit） Smart digital-analog switch Advanced TDMA technology Outstanding heat dissipation RDAC Management Service Innovative operation console Accessory expansion Unlimited repeater sites IP-connection 16 Channels Modular design Analog/digital back-to-back interconnect

RD98XS - Super digital repeater Intelligent super repeater Flexible application via software or hardware upgrade: Analog conventional repeater Analog simulcast transceiver MPT trunking transceiver Digital conventional repeater Digital simulcast transceiver* DMR trunking transceiver This product can be used for different purposes as per the user’s actual needs, ensuring use efficiency. Note: An optional GPS board is needed if this product is used as a simulcast transceiver ( marked by “*” ).

03 Product features

Remote diagnostic and control Local access management Multisite access management Local registered subscribers to access the local repeater. Up to 32 ID segments Nonlocal registered subscribers to access the repeater via multisite access management. Up to 32 ID segments Greatly improved channel efficiency by use these two access control approaches !

Remote diagnostic and control Diagnosis Control & Connection Power supply monitor Power amplifier temperature monitor Forward power monitor Tx REF(reference) power VSWR(Voltage Wave Rate) monitor RSSI(received signal strength indication) monitor Repeater mode/repeater base mode Channel switch High power switch Digital knock down, restart Audio priority, mic gain Jitter buffer, color code Transmit/receive frequency Channel spacing Carrier squelch level Group/private/emergency call hang System inactivity timer (SIT) Repeater encryption IP multi-site access setting

Back to back interconnection Tx=f1, CTCSS 1 RX=f2, CDCSS 1 Analog repeater Tx=f2, CDCSS 1 Rx=f1, CTCSS 1 Tx=f1, CTCSS 1 RX=f2, CDCSS 1 Output Audio Carrier Detect GND MIC PTT Digital Tx=f3 Rx=f4 Group Call 1 Digital repeater Tx=f4 Rx=f3 Group Call 1 Tx=f3 Rx=f4 Group Call 1 Now it’s possible to let your analog radio communicate with digital radio.

04 Network topologies

1 2 3 4 5 6 Repeater Network Topologies IP multi-site connection Super master service In IP multi-site connection Single site connect with PSTN 1 2 3 PSTN interconnection over IP multi-site connection Back to back over IP multi-site connection Connect with SmartDispatch 4 5 6

IP-multisite connection Site A Master repeater RD98X Site B LAN / WAN IP network Slave repeater Tx=f1 Rx=f2 Site C RD98X Slave repeaters Slave repeater Tx=f3 Rx=f4 RD98X RD62X

Super master service …… …… …… …… Master Repeater Root Master Repeater 1 Master Repeater 2 Master Repeater N …… Up to 15 Slave Repeater Slave Repeater Slave Repeater Up to 15 Up to 15 Up to 15 …… …… …… Slave Repeater Slave Repeater Slave Repeater When the master repeater enables the super master service and designates the master repeater root as its super master, it will act as a slave repeater of the master repeater root. On the other hand, it still work as a master repeater in its own network.

Wireless IP link for 2 sites connection iNET300 Wireless IP Link 256kbps/512kbps iNET300 50-100 kilometers RD98x(S) Site 1 RD98x(S) Site 2 IP LAN With help of iNET300 wireless IP transceivers, two or more RD98x(S) can be connected with each other in the distance of more than 50 kilometers through the wireless IP network. Radios in each site could talk with or send message to members of remote site.

Wireless IP link for multi-sites connection RD98x(S) iNET300 Site 1 IP LAN Wireless IP Link 256kbps/512kbps Wireless IP Link 256kbps/512kbps 50-100 kilometers 50-100 kilometers Wireless IP Link 256kbps/512kbps 50-100 kilometers RD98x(S) iNET300 Site 2 RD98x(S) iNET300 Site 3 RD98x(S) iNET300 Site 6 ……

Wireless IP link for moving site connection iNET300 iNET300 Wireless IP Link 256kbps/512kbps RD98x(S) 10-20 kilometers Fixed Station Moving Station RD96X IP LAN With help of iNET300 wireless IP transceivers, the moving station with RD96X can be connected with the RD98x(S) in 10 to 20 kilometers away. All the radios in the moving station could communicate with radios in the fixed station covered by RD98x(S).

PSTN interconnection - single site Phone PSTN Phone PSTN Gateway Repeater Analog/digital repeater supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a group or private call to radio users.

PSTN interconnection - multi site LAN / WAN IP network PSTN Phone PSTN Gateway Repeater Analog/digital repeater supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a group or private call to radio users.

SIP interconnection PSTN cable IP LAN cable IP PBX PSTN Phone IP Switch RD98X IP Phone IP Phone Digital repeater supports simplex voice communications between radio and SIP phone users. It allows a radio user to make a SIP phone call; or a SIP phone user to make either a group or private call to radio users.

Remote connection with PSTN/Telephone iNET300 Wireless IP Link 256kbps/512kbps iNET300 IP Switch 50-100 kilometers Local site Remote Site RD62X UCM6102 / UCM6104 IP phone PSTN IP phone Analog phone PSTN cable IP LAN With help of iNET300 wireless IP transceivers, it’s more easy to construct a remote site with RD62X and connect the remote radios with PSTN/Telephone system.

Back to back over IP multi-site connect TR800 TR800

Connect with SmartDispatch direct connection Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server Gateway DMR radio network Channel 2 Channel 1 Single site

Connect with SmartDispatch independent repeaters DMR radio network Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server gateway Single site DMR radio network Single site

Connect with SmartDispatch IP multi-site network Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server gateway Master repeater Slave repeater 1 LAN / WAN IP network Slave repeater 2 Slave repeater N DMR radio network

Remote Dispatching of Moving team Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server gateway iNET300 iNET300 Wireless IP Link 256kbps/512kbps 10-20 kilometers Moving Station RD96X

05 Products comparison

Products comparison chart HW Key Point For SW RD62X RD96X RD98X RD98XS RF output Power 1-25W 1-10W 5-50W Upgrade to Trunking N Y Port1 UART, USB / 10Pin Port2 DB26 Port3 DB9 Port4 Ethernet GPS Module LCD Colour CH Knob EndStop VOL Knob Power, Volume Local speaker Mic Interface Fan AC input Battery O Target marketing in-door commercial Portable backpack Only conventional Upgrade to trunking O : Optional N: not included Y: Standard

06 Successful cases

Shanghai Fairmont Peace Hotel Challenges Missed call instructions in busy hours Forgot to trace back afterwards Response was delayed and customers were not satisfied. Solution DMR conventional digital communication system of two carriers, four channels SMS interconnection between terminals with the mail system of Hotel’s internal office platform SMS up to 256 characters Superior audio quality of full coverage Versatile voice calls, including All call, Group call & Individual call. Benefits Higher spectrum efficiency, lower networking costs Superior audio quality in a larger area Higher communication confidentiality Rich data applications Flexible solution developing Rugged & reliable products complying with American Military Standards

Greenest Building in Sydney - MSS With a Corporate mission of Protection, Passion & Peace of Mind, MSS Security is Australia's largest security company with more than 4,500 employees, approximately $300 million in turnover, and a national infrastructure with offices in the capital cities of all states and territories. By providing a full range of security services across all market segments, MSS Security provides a visible security presence, demonstrating a broad range of skills from general guarding to highly specialized security roles.