FOIL ERP

Modules Coil Inward Foil Return to Supplier Printing Coil Planning Card QC of Inward Foils Qc After Printing Rolling Stage - I Reel Planning After Inward Inward Reels at Dispatch Qc After Rolling State - I Coating Card Dispatch Reels Rolling Stage - II Lamination Card Sales Return of Issued Reels Qc After Rolling Stage - II Lamination Reel merging Slitting Shop Card QC After Lamination Change Reel Status Coil Slitting Coating Reports Reel Planning QC After Coating Annealing In Conversion Slitting Planning Annealing Out Conversion Slitting Contact US Qc After Annealing Qc After Conversion Slitting Other Raw Material Inward Printing Lot Card LDPE / POLY Inward Pre Printing Status Entry Foil Inward Other RAW Material Returned to Supplier Please Click on Link for Detailed Information. LDPE / POLY Returned to Supplier EXIT

Coil Inward With this module, you will be able to Inward Coils GRN will be generated and can be printed Inward register will be generated Stock of coils It will also have effect in all stock related reports Back

Coil Planning card With this module, you will be able to Make planning of Coil Coil card will be prepared and printed Back

ROLLING STAGE I With this module, you will be able to Enter Rolling Mill stage I entry (pass 1,2,3) After this stage coil will go to WAIT QC AFTER ROLLING I Back

QC After ROLLING STAGE I With this module, you will be able to Enter QC status of coil after rolling stage I After this stage coil will go to WAIT ROLLING STAGE II Back

ROLLING STAGE II With this module, you will be able to Enter Rolling Mill stage I entry (pass 4,5,6) After this stage coil will go to WAIT QC AFTER ROLLING II Back

QC After ROLLING STAGE II With this module, you will be able to Enter QC status of coil after rolling stage I After this stage coil will go to WAIT SLITTING PLANNING Back

Slitting Shop Card With this module, you will be able to Plan for coil slitting planning You can mention slitting setting and expected no. of reels Back

Coil Slitting With this module, you will be able to Enter slitting detail of coil Generate Reel no. Mention reel weight and specifications Back

Reel Planning With this module, you will be able to Plan whether reel will go for annealing, dispatch Back

Annealing In With this module, you will be able to Enter detail of reels on which annealing process is done Also we will be able to keep track of time in Reel status will be changed to ANNEALING IN Back

Annealing Out With this module, you will be able to Enter detail of time out Reel status will be WAIT QC AFTER ANNEALING Back

QC After Annealing With this module, you will be able to QC detail of reels for which annealing process is done Reel status will be WAIT QC REEL PLANNING Back

Other RAW Material Inward With this module, you will be able to Inward other raw material (Other than foils and LDPE/Poly) GRN will be generated and can be printed Inward register will be generated Stock of other raw material will be increased. It will also have effect in all stock related reports Back

LDPE / POLY Inward With this module you will be able to Inward LDPE/Poly reels along with their reel nos. GRN will be generated and can be printed Inward register will be generated Stock of reel no. wise LDPE / POLY will be increased. It will also have effect in all stock related reports Back

Foil Inward With this module you will be able to Inward foils. – Reel no. will be auto generated on the basis of supplier and inward date. GRN will be generated and can be printed Inward register will be generated Stock of reel no. wise foils will be increased. It will also have effect in all stock related reports Foils will have status WAIT QC AFTER INWARD Back

Other RAW Material Returned to supplier With this module you will be able to Return raw material to supplier SRN will be generated and can be printed Sales return register will be generated Stock of other raw material will be reduced. It will also have effect in all stock related reports Back

LDPE / POLY Returned to supplier With this module you will be able to Return LDPE / POLY to supplier SRN will be generated and can be printed Sales return register will be generated Stock of LDPE / POLY will be reduced, also will have effect in reel no. wise stock It will also have effect in all stock related reports Back

Foil Returned to supplier With this module you will be able to Return foils to supplier SRN will be generated and can be printed Sales return register will be generated Stock of foils will be reduced, also will have effect in reel no. wise stock It will also have effect in all stock related reports Back

QC OF INWARD FOILS With this module you will be able to Enter QC status of foils after inward. You can pass reels or hold or reject them. In case of rejection it will ask you reason. After passing of QC reel will go to next stage i.e. REEL PLANNING AFTER INWARD Back

Reel Planning After Inward With this module you will be able to Plan next stage of reel. It can be Lamination , Coating or direct dispatch Next stage of reel will be based on next stage selected. Back

Coating Card With this module you will be able to Prepare coating card. In coating card you can mention input material, input weight, size, HSL type to be used, output weight etc… Lot no. will be generated on the basis of Month and year Reels to be used in the process will be also mentioned during entry. This will give 100 % accuracy because during selection process it will only show those reels which have specific input type, size, gauge and status. So only matching reels and reels which are not used in any process will be considered. Also when reel is selected or unselected total input weight will be displayed. This will give us information of exact input weight. Reels attached with coating card cannot be used with other lot card or process Lot card can be printed Back

Lamination card With this module you will be able to Prepare lamination card. In coating card you can mention input material, lamination instruction input weight, size, LDPE / POLY to be used, output weight etc… Lot no. will be generated on the basis of Month and year Reels to be used in the process will be also mentioned during entry. This will give 100 % accuracy because during selection process it will only show those reels which have specific input type, size, gauge and status. So only matching reels and reels which are not used in any process will be considered. Also when reel is selected or unselected total input weight will be displayed. This will give us information of exact input weight. Reels attached with coating card cannot be used with other lot card or process Lot card can be printed Back

Lamination With this module you will be able to Enter reels used as an input along with used weight, hand over weight, taken down weight. Here only those reels will be available which are linked with selected lot. Enter LDPE / POLY used along with reel no. information Output reels generated with output weight. Reel no. will be generated in such a way that you can get detail of input reels used for that output reel. Generated output reels will be displayed as reels WAIT FOR QC AFTER LAMINATION. Back

QC after Lamination With this module you will be able to Enter QC result of reels generated during lamination. QC passed reels will be available for conversion slitting. Back

Coating With this module you will be able to Enter reels used as an input along with used weight, hand over weight, taken down weight. Here only those reels will be available which are linked with selected lot. Enter HSL material used in the process. Output reels generated with output weight. Reel no. will be generated in such a way that you can get detail of input reels used for that output reel. Generated output reels will be displayed as reels WAIT FOR QC AFTER COATING. Back

QC after coating With this module you will be able to Enter QC result of reels generated during coating. QC passed reels will be available for conversion slitting. Back

Conversion Slitting Planning With this module you will be able to In Conversion slitting there can be different cutter settings, size and sets. Also planning of core is also mentioned in this planning. Back

Conversion Slitting With this module you will be able to Enter detail of input reels used in conversion slitting. Here only those reels which are generated in the given lot will be displayed for input reel information. In Conversion slitting there can be different cutter settings, size and sets. Also planning of core is also mentioned in this planning and lot no. output reel nos. will be generated automatically. Weight of output reel will be automatically calculation on the basis of core type, ID and OD and product density which will be very close to actual weight. All the reels generated in this process will have status WAIT QC AFTER CONVERSION SLITTING. In case of lamination lot card, software will also ask, if output reel will be used for printing or not Back

QC after Conversion Slitting With this module you will be able to Enter QC result of reels generated during coating. QC passed reels will be available for dispatch or printing planning Back

Printing lot card With this module you will be able to During conversion slitting which ever reels were marked as ‘TO BE USED FOR PRINTING’ will be available here also exceptionally you can use other slitted reels. In this form you can enter all printing related information.   Back

Pre-Printing status entry With this module you will be able to There are various stages of printing process. With this module you can mark various activity mile stones which are prerequisite before printing. This will give us clear idea of where we are standing during printing process Back

Printing With this module you will be able to Enter detail of input reels (which are linked with selected lot) Output reels generated during printing process. Printing material used during process. Back

QC after printing With this module you will be able to Enter QC result of reels generated during coating. QC passed reels will have status WAIT DESPATCH Back

Inward Reels at Dispatch With this module you will be able to Reels which passed QC after printing or lamination or coating will be available in this module. Box wise reel packing detail will be entered in this module. It will also have link with weighing scale and ability to get automatic weight. Back

Dispatch Reels With this module you will be able to Final dispatch will be done at this stage. Packing slip will be printed and finally reel will be removed from our stock data. Back

Sales Return of issued reels With this module you will be able to Enter returned reels SRV will be printed and reel stock will be updated. Back

Reel merging With this module you will be able to Merge two reels and generate one reel It will also affect, reel wise stock. Back

Change Reel Status With this module you will be able to If reel is moved further to next stage by mistake or any process is to be repeated for a specific reel, you can use this module. Back

Reports We will fix report formats before, software installation Back

Technical Information Whole software is developed in .NET technologies and VB as code behind. Back End (Database) will be SQL Server 2005 (Express Edition) It will be Multiuser (LAN) version. Reports will be designed considering Laser/Inkjet printer and A4 size page size. Application will run on Windows 2003 (or higher) Server and Windows XP or higher OS. Application will run on windows platform Back

WIPRA WORLD WIDE A-1, SHREE LAXMI APPARTMENT, B/H. AXIS BANK, LAW GARDEN, AHMEDABAD – 380006. GUJARAT (INDIA). Contact : 8141111738 Email : pramod@wipraworldwide.com Website : www.wipraworldwide.com Back