Pilot Walktour Pack Product Overview v3.2

Contents 1. Overview 2. Product Details 3. New Features 4. Main Features 5. Supported Terminals 6. Conclusion

Pilot Walktour pack Overview

Comprehensive information Product Introduction 概 述 Pilot Walktour Pack is a portable multi-technology test tool for measuring wireless network quality and services performance. With an iPad and smart phones integrated into a single backpack, the system provides powerful functions for multi-network benchmarking. Pilot Walktour Pack's unique design allows users to perform measurements on test sites, network performance, and services quality in a convenient way. High work efficiency Centralized control Comprehensive information

Traditional Drive Test Tool Product Introduction 概 述 Multiple test devices for network benchmarking. Not portable enough due to equipment set up Connection via cable or USB port Sufficient power solution needed for continuous outdoor tests Mostly dependent on iPhone and Android based devices Traditional Drive Test Tool Portable, a backpack contains all test devices Connection with WiFi or data cable Stable, and easy for commissioning Built-in battery Continuous test capability: up to eight hours Multiple commercial handsets used for testing Pilot Walktour Pack Powerful, portable, simple operation for benchmarking testing

Pilot Walktour pack Product Details

Product Details-System Architecture 产品介绍 Portable benchmarking tool Based on commercial mobile phones Controller Data interaction Wi-Fi/Cable Connection Control interaction Data management and analysis platform Pilot Pioneer Expert Post-processing

Product Details-System Solution iPad Mobile Phone Pilot Walktour Pack Case Controller Configure test terminal groups Deliver test plans Manage data files Monitor test terminals and test progress Display real-time test information Test terminal Based on iOS/Android operating system for measuring wireless network quality and services performance Supports GSM/UMTS/LTE network technologies Collect wireless parameters Fix test terminals Supports a maximum of six terminals for continuous (up to) eight hours testing Connect with iPad through Wi-Fi Automatically detect devices for connection

Product Details-System Solution Pilot Walktour Pack Portable benchmarking test Various test services Simultaneous multi-network testing Managed by one engineer throughout the whole testing Monitor real-time test progress and check parameter information Customized test groups CS Call, CSFB FTP, Ping, Email, HTTP Page, Parallel Service, Video Play, HTTP Download, PBM, Speedtest, etc. Various test scenarios Measurements from a user's perspective Outdoor and Indoor tests Outdoor GPS positioning and indoor pin-pointing test Accurate and detailed parameter information Commercial mobile phones based on iOS/Android operating system Measurements from a user's perspective Collects various wireless parameters

Product Details-System Solution Test anytime anywhere Indoor Test: such as within passenger lifts, shopping center, residential buildings and scenic areas. Outdoor test Pre-defined floor plans Building GPS location Indoor coverage distribution display JPG/PNG/BMP map import Automatic map import for indoor test Log files storage according floor level Built-in high performance GPS Google online/offline map User-defined parameters display Cell site details

Product Details-System Solution Data management and analysis Test events and alarms can be checked on the mobile phone. Fleet Unify and Pilot Navigator are used for data analysis and management. Various analysis and reports are supported. Pilot Pollution Analysis Neighbor Cell Analysis Overlapping Analysis Single-cell Coverage Analysis Co-channel/Adjacent Channel Analysis Effective Cell Analysis No Main Serving Cell Analysis Overshooting Cell Analysis MOC-MTC Report Data Service Report Custom Events Analysis BIN Analysis Difference Value Analysis PPP Analysis Signaling Delay Analysis MOC-MTC Analysis Coverage Rate Analysis Frequent Handover Analysis

New Features In Version 3.2

Reconstruction of Data File Management Function 新功能 Sort Function: Data files can be sorted based on upload status and data time. Multiple Data Formats: Multiple data formats (including *.rcu, *.dtlog, *.pcap) are supported for data upload to Pilot Fleet Unify. Real-Time Data Upload: Data files can be uploaded to the user-defined FTP server in real time. Event Search Function: Users may search events based on keywords, and corresponding events will be displayed on the interface.

MOS Test Added 新功能 MOS test option is added to the Call test settings page. Users may set MOS test type and MOS algorithm type.

Customize Test Process Tags 新功能 During service test, users may add tags to mark the test process as required. The added tags will be saved to corresponding data files.

Freeze Measurement Information Screen 新功能 Users may freeze the real-time test information screen as required. After freezing, there is no real time update on the event and message information (but the information is still collected in the background), thereby allowing users to check the current event and message history. The real-time event and message information can be updated again after unfreezing.

Real-Time Statistics 新功能 Real-time statistics for voice and data services test (e.g. success rate, speed) is supported in this version

Remotely Reboot or Shut down Pilot Walktour Pack Case 新功能 Users may remotely reboot or shut down the Pilot Walktour Pack Case from the iPad. Therefore, users do not need to press and hold the power key for a physical rebooting or shutting down

Pilot Walktour pack Main Features

Upgraded Pilot Walktour Pack Case Pilot Walktour Pack Case is upgraded to version 3.0. Android mobile phones are connected with the backpack Hub through data cables to ensure stable and reliable connection with iPad.

Various Test Services Supported Various test services are supported. Voice services: CS Call，CSFB Data services: Ping, FTP UL/DL, HTTP Download, HTTP Page, WAP Page, WAP Download, Email Send, Email Receive, Trace route, Video Play, Facebook, Multi FTP Upload, Multi FTP Download, HTTP Upload, PBM Others: Idle, Parallel test Loop test PPP Connection modes for data services

Monitoring and Data Management Real-time monitoring Real-time parameters, events, messages of all devices can be monitored and displayed during tests. Alarm Supports various alarm modes: audio alarm, alarm with icons, alarm with subtitle, etc. Supports alarm summary Map Collects GPS data and display tracks in real time Support pin-pointing for indoor tests Data Data files are uploaded to the iPad for management after testing. Test routes displayed on Map Real-time Information Data file uploaded to the iPad Alarm

Application Scenarios Indoor test: Within hotel buildings, Offices, etc. Outdoor tests: road, high-speed rail, etc. Outdoor tests: scenic spots Outdoor tests: schools

Supported Terminals

Supported Terminals 支持终端 Supported iOS-based terminals are as bellows: Device Model Description iPhone 6 (HK Version: A1586) iPhone 6Plus (HK Version: A1524) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 2G/3G: CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 3G: UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 MHz) 4G: FDD-LTE (Bands 1, 2, 3, 4, 5, 7, 8, 13, 17, 18, 19, 20, 25, 26, 28, 29) 4G: TD-LTE (Bands 38, 39, 40, 41) iPhone 5S (HK Version: A1530) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 4G: TD-LTE (Bands 38, 39, 40) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: WCDMA/HSPA+ DC (850, 900, 1900, 2100 MHz) 4G: FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20) iPhone 5S (HK Version: A1533) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 2G/3G: CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 4G: TD-LTE (Bands 38, 39, 40) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: WCDMA/HSPA+ DC (850, 900, 1900, 2100 MHz) 4G: FDD LTE (Bands 1, 2, 3, 4, 5, 8, 13, 17, 19, 20, 25)

Supported Terminals Supported Android-based terminals are as bellows: Device Model Description Samsung Galaxy S5 (G9008V) GSM: 850/900/1800/1900 MHz TD-SCDMA: 1880/2010 MHz WCDMA: 850/900/1900/2100 MHz, only supported on international roaming TDD LTE: 1900/2300/2500/2600 MHz FDD LTE: 1800/2600 MHz, only supported on international roaming Samsung Galaxy S5 (G9006V) UMTS: 850/900/1900/2100 MHz LTE FDD: 1800 MHz LTE TDD: 2300/2500 MHz LTE FDD: 2100/2600 MHz, only supported on international roaming Samsung Galaxy S5 (G9009W) CDMA: 800 MHz EVDO: 800 MHz FDD LTE: 1800/2100 MHz Samsung Galaxy Note3 (N9008S) GSM: 850/900/1800/1900 TD-SCDMA: B34/39 TD-LTE: B38/39/40

Supported Terminals Device Model Description Samsung Galaxy Note3 (N9008V) GSM: 850/900/1800/1900 MHz TD-SCDMA: 1880/2010 MHz TD-LTE: 1900/2300/2600 MHz WCDMA: 850/900/1900/2100 MHz, only supported on international roaming FDD-LTE: 1800/2600 MHz, only supported on international roaming Samsung Galaxy Note4 (N910G) UMTS: 850/900/1900/2100 MHz LTE-FDD: B1 (2100 MHz)/B2 (1900 MHz)/B3 (1800 MHz)/B4 (AWS)/B5 (850 MHz)/ B7 (2600 MHz)/B8 (900 MHz)/B28 (700 MHz) LTE-TDD: B38 (2600 MHz)/ B40 (2300 MHz) Samsung Galaxy S6 (G9200) GSM: 850/900/1800/1900 CDMA: 800 UMTS: B1 (2100), B2 (1900), B5 (850), B8 (900) EVDO: 800 TD-SCDMA: B34 (2010), B39 (1880) FDD-LTE: B1 (2100), B3 (1800), B4 (AWS), B7 (2600), B8 (900), B28 (700) TDD-LTE: B38 (2600), B40 (2300), B41 (2500)

Conclusion

Conclusion—Portable Benchmarking Test Solution 应用场景 Product Advantages Product Values 1 Portable, managed by one engineer for benchmarking tests 1 Tests with common handsets to perform measurements from user's perspective Concurrent test on multi-network to reduce operational cost and minimize test period 2 Small and easy to operate 2 3 Built-in battery for continuous testing 3 Simple and easy operation for better productivity and shorten the learning curve 4 Built-in high-performance GPS 4 Product operation stability to enhance work efficiency

Customer Base 应 用 在海外国家和地区应用广泛