200-105 ICND2 v3.0 Exam CCNA Routing and Switching 200-105 ICND2 Exam http://www.it-dumps.com/200-105.html 200-105 ICND2 v3.0 Exam, CCNA Routing and Switching 200-105 ICND2 Exam

200-105 ICND2 v3.0 Exam Details Exam Number: 200-105 ICND2 Associated Certifications: CCNA Routing and Switching Duration: 90 Minutes (45-55 questions) Available Languages: English, Japanese 200-105 ICND2 v3.0 Exam Details, 200-105 ICND2 v3.0 Interconnecting Cisco Networking Devices Part 2 (ICND2)

200-105 ICND2 v3.0 Description The Interconnecting Cisco Networking Devices Part 2 (200-105 ICND2) exam is a 90-minute, 45–55 question assessment that is associated with the associated with the CCNA Routing and Switching certification. This exam tests a candidate's knowledge and skills related to LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure maintenance. 200-105 ICND2 v3.0 Description，Interconnecting Cisco Networking Devices Part 2 (200-105 ICND2)

200-105 ICND2 v3.0 Exam Topic 1.0 LAN Switching Technologies 26% 2.0 Routing Technologies 29% 3.0 WAN Technologies 16% 4.0 Infrastructure Services 14% 5.0 Infrastructure Maintenance 15% 200-105 ICND2 v3.0 Exam Topic

CCNA Routing and Switching The CCNA Routing and Switching exams and trainings are being revised from v2.0 to v3.0. Candidates can choose to take either the version 2.0 exams or version 3.0 exams. The last day to test for the 200-120 CCNA v2.0 and 100-101 ICND1 v2.0 exams will be August 20, 2016. The last day to test for the 200-101 ICND2 v2.0 exam will be September 24, 2016. CCNA Routing and Switching, 200-125, 200-105, 100-105

CCNA Routing and Switching Exam 200-125 CCNA v3.0 Interconnecting Cisco Networking Devices: Accelerated (CCNAX) Or 100-105 ICND1 v3.0 Interconnecting Cisco Networking Devices Part 1 (ICND1) And 200-105 ICND2 v3.0 Interconnecting Cisco Networking Devices Part 2 (ICND2) CCNA Routing and Switching, 200-125, 200-105, 100-105

200-105 ICND2 v3.0 Exam Demo What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command? A. defines the destination IP address that is used in all broadcast packets on DCLI 202 B. defines the source IP address that is used in all broadcast packets on DCLI 202 C. defines the DLCI on which packets from the 192.168.1.2 IP address are received D. defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address Answer: D 200-105 ICND2 v3.0 Exam Demo 1/5

200-105 ICND2 v3.0 Exam Demo What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology? A. It avoids split-horizon issues with distance vector routing protocols. B. IP addresses can be conserved if VLSM is not being used for subnetting. C. A multipoint interface offers greater security compared to point-to-point subinterface configurations. D. The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations. Answer: B 200-105 ICND2 v3.0 Exam Demo 2/5

200-105 ICND2 v3.0 Exam Demo Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers? A. IETF B. ANSI Annex D C. Q9333-A Annex A D. HDLC Answer: A 200-105 ICND2 v3.0 Exam Demo 3/5

200-105 ICND2 v3.0 Exam Demo It has become necessary to configure an existing serial interface to accept a second Frame Relay virtual circuit. Which of the following are required to solve this? (Choose three) A. configure static frame relay map entries for each subinterface network. B. remove the ip address from the physical interface C. create the virtual interfaces with the interface command D. configure each subinterface with its own IP address E. disable split horizon to prevent routing loops between the subinterface networks F. encapsulate the physical interface with multipoint PPP Answer: B,C,D 200-105 ICND2 v3.0 Exam Demo 4/5

200-105 ICND2 v3.0 Exam Demo Which two statistics appear in show frame-relay map output? (Choose two.) A. the number of BECN packets that are received by the router B. the value of the local DLCI C. the number of FECN packets that are received by the router D. the status of the PVC that is configured on the router E. the IP address of the local router Answer: B,D 200-105 ICND2 v3.0 Exam Demo 5/5

18% Off on Oracle And Adobe It-Dumps offers 18% off on all Oracle and Adobe Exams