OPERATING CONVERSION EQUIPMENT DOING CASSETTE CONVERSION GOES TO CD By. Sarbini, S.Pd (SMK Muh 3 Yogyakarta)

1. OPERATE WINDING CASSETTE A. CASSETTES WINDING PARTS 1. Regulator days 2. Hour regulator 3. Minute regulator Microphone internal Indicator lamp Time caller CASSETTES WINDING EXAMPLE Teknologi dan Rekayasa

The time of day Program Timer ON / OFF Headphone terminal Telephonical tone 12. mic's input Teknologi dan Rekayasa

Voice activation switch Record Play Voice activation switch (ON / OFF) Knob is volume Voice activation switch Record Play Voice activation switch (ON / OFF) Rewind Forward Stop / Eject Normal speed Pause Reset is numerator ribbon Appearance ribbon numerator Teknologi dan Rekayasa

B. CONTROL'S POSITION CARA MEMEGANG PLAYER Teknologi dan Rekayasa

C. LINGKING VOLTAGE SOURCE Player with merk “ VersaCorder ” it can work by use of adaptor AC or 4 fairish dry cells c and also refill dry cells (rechargeable batteries) . Dry cell importanting to looks after condition of hour and program memory if power adaptor's cable is snipped off from player it is more than 3 minutes. Teknologi dan Rekayasa

D. ASSEMBLY DRY CELL To assemble dry cell, dry cell shell is pressed downwards until crook escapes then issue shove as pictured as beside. Teknologi dan Rekayasa

setting's knobbed position the time of day E. MANAGING DAY AND THE TIME OF DAY Press and hold knobbed CLOCK while wants to change time Up to switch CLOCK is bated, DAY'S knobbed press then vote for day suitably as one is featured on display. Up to switch CLOCK is bated, HOUR'S knobbed press until AM / PM'S sign performs on display setting's knobbed position the time of day Letak tombol setting jam Teknologi dan Rekayasa

Up to switch CLOCK is bated, MIN'S knobbed press then vote for setting time suitably. Every time switch MIN is pressed, therefore self acting SECONDS direset returns to 0. Screen look on LCD Teknologi dan Rekayasa

F. INSERTING CASSETTE RIBBON Knobbed press STOPS / EJECT to open cassette place. Teknologi dan Rekayasa

2. RUNNING PLAYER'S CD Three drive's base components: Driver's motor. Player's CD function: Find and reads data that is kept as bump in CD. Player's CD constitute tool who can cut precisely. Three drive's base components: Driver's motor. Laser system and reader focus lens bump. One track mechanism grooves to move laser formation so laser file can follow spiral path( track system shall can move laser on micron's rev). Teknologi dan Rekayasa

Assembly's Pickup laser Disc Drive motor Lens's laser Tracking motor PLAYER'S CD PARTS Disc Drive Assembly's Pickup laser Disc Drive motor Lens's laser Tracking motor Tracking Drive Teknologi dan Rekayasa

4. RUNNING CHANGER'S CD (CD-ROM) CD-ROM parts: Lampu indikator loading/unloading/busy. Disc tray Headphone terminal (3,5 mm) Headphones volumed control OPEN / CLOSE'S switch Hole to open tray if necessary (emergency) Output's terminal audio Teknologi dan Rekayasa

10. Terminal portions to energi. 8. Jumper (socket) to choose configuration (master's mode, slave or cable select). 9. Konektor ATAPI, ATAPI konektor is bus with total pin 40 foot is utilized for data traffic with computer 10. Terminal portions to energi. Teknologi dan Rekayasa

Installing drive CD-ROM into computer Arrangement configuration cheque jumper drive CD-ROM as master, slave, CSEL. Turn the computer off and power supplay's cable escape of computer. Move computer close. Drive's installing CDROM into computer and accelerates by skrup. Driver CD ROM Teknologi dan Rekayasa

Card arrangement cheque interface. Interface card installing into slot. Accelerate interface cable of interface card goes to drive CD-ROM. Accelerate audio cable connection as necessary. Accelerate DC Power Supplay's cable from power supplay computer goes to drive CD-ROM. Installing closes computer. Teknologi dan Rekayasa

SYSTEM ON covers drive CD-ROM Running Drive SYSTEM ON covers drive CD-ROM Knobbed press; OPEN / CLOSE drive is CD-ROM to open disc's place. Disc's post intermediated by disc's place with nurginal tag upon as it were pointed out in by image. Place disc will open selfs acting momentary stop. Run with point driver's apparatus instruction manual CD-ROM. Teknologi dan Rekayasa

Disc tray Teknologi dan Rekayasa

To avoid laconic link and also electricity sting, therefore: CD-ROM Using Up safety Voltage's source. CD-Rom by and large working by use of energy portion + 12V and + 5V. To avoid laconic link and also electricity sting, therefore: Don't strike water or another liquid Don't open to close CD-ROM especially while be revolves since get to cause effect wound strikes hard CD lap Don't put objects (particularly object which weight) upon CD-ROM Don't utilize otherwise CD-ROM to be assembled as it were must it Ensure imbedded cable relationship firmly Teknologi dan Rekayasa

If there is bungling object which turns in at CD-ROM If things hereunder happens, shortly switches off SYSTEM including CD-ROM drive then pulls out power's cable from jala jala electricity. That problem among those: If there is bungling object which turns in at CD-ROM If there is liquid which falls and input go to CD-ROM If CD-ROM can't work as it were must it, eventually operation steps was right. If CD-ROM will be taken down If CD-ROM regards the other part performance. Teknologi dan Rekayasa