Aluminium Available in 1000mm wide Available in Standard and Bold Profile Silver or Off-white Bonded colour Lightweight Suitable for use in Swimming pools

Steel Available in 940mm width Available in Bold Profile Zincalume or Off-white Bonded colour Superior Strength Commonly used in Gymnasiums and Multi Purpose halls where impact is possible.

Foil Supplied in Rolls Foil supplied in Rolls up to 25lm in Aluminium Foil supplied in Rolls up to 15lm in Steel

Foil Packaging Sampal Pallet Foil Box Export Sampal Pallet Box

Support Bar Packaging Renhurst FasTrack Support Bar Packaged 4 lm

Set Out First determine Ceiling Layout Material width 1000mm (940mm Steel) Support Bar centers at 1005mm (945mm Steel)

Ceiling Set out

Set Out – Example 1

Set Out – Example 2 These set outs are examples only. Ceiling can be installed to meet Architects or Clients requirements.

End Wall Angle Determine Ceiling Height. Fix 20 x 20mm Aluminum angle to end walls

Starter Bar Attach Starter Bar to Support Bar Use Aluminum Pop Rivets

Position Support Bar Fix Support Bar to suspension clips Insert Support Bar Joiners Fix with Pop Rivet Close Suspension clip tab

Renhurst have a fixing clip to suit all applications

Close Support Bar Clip

Support Bar Joiner

Support Bar Detail Starter Bar supplied 300mm long including all components Can be used in any position Can be supplied in various lengths

Prepare Foil Determine length of material required Cut to length using sharp knife Ensure cut is made on the high side of the corrugation

Non Standard Width Determine width required. Roll Foil out onto a suitable Bench. Cut Foil using a high speed electric circular saw with an Aluminum cutting blade.

Lubricate Support Bar

Feed Foil into Support Bar

Feed Foil into Support Bar

Gently Pull Foil into Lubricated Support Bar.

Finishing off your ceiling Clip bottom section of starter bar into position