Pilot Walktour Pack Operation Guide V3.4

Contents 1 2 3 4 5 Overview Test Procedure Outdoor Test Indoor Test Data Management 2 1 3 5 4 Overview

Overview Pilot Walktour Pack, a solution that is based on the combination of iPad and smart phones, is a portable wireless network benchmarking tool for indoor and outdoor data collection activities. It measures network performance and services quality from a user’s perspective. Data interaction is achieved through connecting the iPad and smart phones via Wi-Fi. The iPad is used as the control device, to manage one or more handsets during test measurement. The handsets perform data or voice tests according to the test plan distributed from the iPad and then uploads the test data back to the iPad for display.

Pilot Walktour Pack Case (WiFi+ interaction system + power control) System Architecture Controller Connection through WiFi and USB cables Pilot Walktour Pack Case (WiFi+ interaction system + power control) Control Interaction Data Interaction iOS: connection through WiFi Android: connection through USB Connection through WiFi and USB cable

Contents 1 2 3 4 5 Overview Test Procedure Outdoor Test Indoor Test Data Management 2 1 3 5 4 Overview

Test Procedure 1 2 3 4 5 6 Connect Pilot Walktour Pack Case System Settings Automatically Detect Devices and Group Configure Test Task Deliver Test Task 2 1 3 5 4 Start Tests 6 Connect Pilot Walktour Pack Case

Connect Pilot Walktour Pack Case Wi-Fi: PhoneBox_XXX (where XXX indicates a string like "181") Password: wifi@phonebox Turn on the power of the Pilot Walktour Pack Case. Connect iPad to the WiFi hotspot of the Pilot Walktour Pack Case. Connect all test devices to the Pilot Walktour Pack Case. iOS based devices: Connect to the WiFi hotspot of the Pilot Walktour Pack Case Android based devices: Connect to the USB port of to the Pilot Walktour Pack Case. Start Pilot Walktour Pack. Start Pilot Walktour, and tap Multi-Test.

Introduction to the USB Interface of Pilot Walktour Pack Case USB interface and power charging interface Power charging interface

System Settings After logging in to Pilot Walktour Pack, tap Settings to configure the system. Set the correct server information and select a data transmission mode. Select a data partitioning mode and set a threshold value. The default data partitioning mode is By Size and the value is 6 M. Enable Daylight Saving Time as required. Tap Version to select a version as required (options: For China Unicom User, For General User).

Automatically Detect Devices and Group 1 2 3 4 After connecting iPad and mobile phones to the system, enter the home page. Tap New Project, and Pilot Walktour Pack will automatically detect devices. Drag detected devices into different test groups as required, and then tap Save.

Configure Test Tasks Tap Edit Task to configure test tasks. Select a test service and configure information as required. Tap Save. Select a test service Edit and save the test task

Configure Test Tasks-Scanner 1 2 Connect test devices with the scan test license. Select a scan type, e.g. Color Code. Select the frequencies to scan. Enable other optional functions as required, and save the settings.

Configure Test Tasks-MOS Enter the called number. Enable MOS. Select a MOS type: PESQ or POLQA. Select a POLQA sample (when POLQA is selected as the MOS type). Select a POLQA calculation type (when POLQA is selected as the MOS type). 1 2 3 5 4

Deliver Test Tasks After editing test tasks, tap the button shown as in the figure to deliver test tasks. Tap this button to deliver test tasks.

Contents 1 2 3 4 5 Overview Test Procedure Outdoor Test Indoor Test Data Management 2 1 3 5 4 Overview

Change Maps ２ 3 1 Before the service test, users may: Tap Settings on the left pane. Tap General Settings. Select Offline Map or Apple Online Map as required. ２ 3 1

Start Test After delivering test tasks, tap the button to start test. Select Outdoor. Enter required test information. Tap OK.

View Test Information During test, users may tap a group to view corresponding information, including test routes, messages, and parameters. 1 2 3 Test Routes on the Map Messages Parameters

View Parameters Parameters display pane During the service test, users may view the real-time parameters information on the Map window.

View Message Details 1 Tap Freeze Screen During the service test, users may Tap Freeze Screen on the Message window, and Tap a message to view the decoded information about the message. 2 Tap a message

Contents 1 2 3 4 5 Overview Test Procedure Outdoor Test Indoor Test Data Management 2 1 3 5 4 Overview

Start Test After delivering test tasks, tap the button to start test. Select Indoor. Enter required test information. Tap OK.

Pin Point on the Map During test, tap a Group, and select a map. Tap Map Manage to select a map. Tap Mark and then move your finger onto the map as required. Tap Undo Mark to cancel the last pinning points. Tap Clear All to clear all points. Tap Clear Map to clear the map.

View Test Information During test, users may tap a group to view corresponding information, including messages, and parameters.

View CA Parameters Users may view real-time CA parameters on the Parameter window.

Contents 1 2 3 4 5 Overview Test Procedure Outdoor Test Indoor Test Data Management 2 1 3 5 4 Overview

Data Management Tap the RCU icon to enter the data management window. Outdoor test data files and indoor test data files are categorized individually. Users may tap Sort, Delete, Upload, and Sycn to sort, delete, upload, and synchronize data files respectively Note: Users cannot conduct any operation on data files during test.