Altivar 71 Solution oriented Options From 0.37 kW up to 2000 kW 3 phases : 240 / 480 / 690 V High Performance Industrial & Special Complex Machines Options Electrical/Mechanical options Braking resistors, Line chokes (AC & DC), Motor chokes, Additional input EMC filters, Braking units, Passive filters, Sinus filters Commission options Simple loader, Multi-Loader, Bluetooth Dongle, SoMove, SoMove mobile, Remote Display Terminal & Drive navigator

Altivar 71, dedicated to High Performance Industrial & Special Complex Machines Solution Integrated Macro-configurations designed for more than 150 application functions Performances & Safety Speed and torque precision, Full torque at 0 speed Machine standard EN 954-1 category 3 Electrical installations standard IEC/EN 61508-1 SIL2 Openness Integrated Modbus & CANopen EtherNet/IP, Modbus TCP, Profibus DP V1, Profibus DP V0, DeviceNet, Interbus S, CC-Link, Modbus Plus. Drive Navigator More service/ maitanence Continuity of service assured irrespective of turbulences (auto-adaptative switching frequency, immunity to supply voltage drops up to 50%, alarm management,…)

Altivar 71, Solution Oriented

All locations In enclosure On a wall In severe environments Resistance assured with Altivar 71 reinforced version conforming to category 3C2 of IEC 721-3-3. In enclosure Savings in space assured, with an IP20 protection : reduced width, side by side mounting... Reduction of heat dissipation inside the enclosure by installing the heatsink outside (degree of protection IP54). On a wall Simple installation using mounting kit (protection degree IP21 or Nema type 1). Altivar 71 in IP54 version.

Evolutionary equipment Unrivalled basic equipment Modular configuration Application Oriented More than 150 functions available Openness Integrated Modbus and CANopen Able to communicate with all Industrial field-buses Openness I/O extension communication Controller Inside programmable card Friendly Graphic Display (14 languages) Ready to go EMC mastered DC chokes (above 15kw) DC braking unit up to 160kw Interface cards for incremental encoder Safety Inside "Power Removal” safety function

Unrivalled equipment Graphic terminal Appendix "Power Removal” safety function Machine standard EN 954-1 category 3 and standard for electrical installations IEC/EN 61508-1 SIL2, and certified by a competent body (INERIS) Machine certification without difficulties, Elimination of electromechanical redundancies, Reduced cabling and installation times, Saving space in enclosures... Graphic terminal Possibility of multipoint connection to several drives. Economical, Altivar 71 is also available with a 7-segment display for ratings up to 15 kW.

Modular equipment... Appendix You require additional inputs/outputs, a particular communication network... All you have to do is select up to 3 cards from those available. You benefit from both simplified integration in your automation system and optimised costs. I/O extension cards logic input, open collector outputs, relay, PTC probe input, analogue inputs, analogue outputs, pulse input. Communication cards Fipio, Ethernet, Modbus Plus, Profibus DP, DeviceNet, Uni-Telway, INTERBUS for connection to the main communication networks. Interface cards for incremental encoder RS422, open collector, Push Pull, for: obtaining full torque even at 0 speed, increasing speed and torque precision, increasing dynamic performance. Controller Inside programmable card Integration of programmes in the drive for decentralisation of the machine automation systems.

The Ace at piloting Automatic Piloting Altivar 71 easily adapts its drive performance... Whatever your choice of automation system solution, it always provides excellent efficiency for improved productivity... Access to the means of command, information or to actuators is direct, with complete transparency. Automatic Piloting The Controller Inside programmable card transforms the Altivar 71 into a true automation island Semi-automatic Piloting One group of command is issued by a programmable controller, the other by the operator. Manual Piloting Commands are issued directly by the operator via a joystick, pushbuttons, switches or using the graphic terminal

The Ace at piloting Appendix Automatic Piloting The Controller Inside programmable card incorporates automation functions appropriate to your profession. With its processing as close as possible to the control motor, the movements gain in speed. Modbus integrated Altivar 71 Master With the Controller Inside card: CANopen master network. Additional inputs/outputs. Magelis terminal I/O Advantys OTB CANopen The display functions of the graphic terminal are kept for information and configuration. Supervision via Ethernet, Modbus (or an alternative communication network). Controller Inside Card Distributed I/O Advantys STB Altivar 312 Altivar 71

The Ace at piloting Appendix Semi-automatic Piloting The source of commands such as start/stop instructions, references, etc. can be separated. You benefit from quick reaction times due to direct processing of information by the drive. TSX Micro PLC TSX Premium PLC Adaptation of the piloting to the operating phase : setting-up, operation or maintenance. Using the I/O mode, the networks are accessible to all: Altivar 71 is controlled in the same way as cabled logic. Possibility to supply the control with an external 24 V DC for diagnostics always available. Advantys OTB CANopen integrated Other networks Communication Card Altivar 71 Slave

Altivar71: Freedom of Movement Material Handling Hoisting Wood Machines Process Machines Textile Machines Packaging Dynamics Precision Speed Safety High Speed Protection Precision Regulation Precision Speed Repetitiveness Quickness Reaction time : 2ms ± 0.5ms Pulse or diff.al analogue input Main comm° Networks Positioning on Limit switches Multi parameters Brake control Weight Measurement High Speed Hoisting Brake feedback Control Limit switches management Operation up to 1000 Hz Fast controlled stop on supply failure Control by integrated CANopen network Motor surge limitation PID regulator High resolution reference:1/32000 Speed & Torque control Main comm° networks Separate 24VDC control supply Regenerative braking unit Connection to common DC bus Speed reference high resolution Speed precision Up to 50 Hz Bandwidth Traverse control Function Connection to DC bus High bandwidth Response time : 2ms ± 0.5ms Control by Integrated CANopen network Positioning on limit switches

ALTIVAR 71 Embedded Modbus CANopen Optional EtherNet/IP (RSTP) Modbus TCP Profibus DP V1 Profibus DP V0 DeviceNet Profinet EtherCAT Interbus S CC-Link Modbus Plus

Continuity of service assured irrespective of turbulence! Immunity to supply voltage drops of up to - 50 %. Protection against installation "noise" by integrated EMC filters. Operation up to 50°C without derating. Configurable behaviour on fault. Alarm management. Auto-adaptation of switching frequency. High immunity of the drive.

Configure without being aware of it! Many macro-configurations are already integrated that are designed for a wide variety of applications and uses : material handling, hoisting, general use, connection communication networks, PID regulation, master, slave.... They can easily be modified. The architecture of the menus, hierarchical parameter system, and short-cut functions enable simple and quick programming even for the most sophisticated functions. The “Simply Start” menu provides you with assistance for obtaining the best from the Altivar 71 and for protecting your motor

More on board services Ample and varied, the services available via the graphic terminal simplify setting-up and diagnostics of your machines. Display of inputs/outputs, communication, etc. Service messages all types of information on the display : a phone number, a specific instruction... stored in the drive Tests functions for drive, for motor, components, inputs/outputs... Identity card incorporated in the drive simplifies installed base management

Altivar 71, among the 150 functions available... Appendix Altivar 71, among the 150 functions available... Torque regulation Torque / speed regulation switching Torque limitation Current limitation Delinearisation of reference (magnifying glass effect) Reference switching Operations on the references (summing, subtraction, multiplication) S and customised ramps Ramp switching Step by step (JOG) Preset speeds PID regulator Auto / manual Preset PID references Brake sequence suited to movements High speed hoisting Brake contact feedback processing Weight measurement processing Limit switch management HSP-> LSP end of travel positioning Load balancing Multimotors, multiconfigurations Multiparameters Auto-tuning Motor fluxing + speed / - speed with single or 2-stage pushbuttons Reference saving Automatic DC injection Configuration of type of stop: freewheelstop, fast stop, DC injection stop, fastest stop possible Configurable behaviour of Altivar 71 on fault Configurable undervoltage management Line contactor control Downstream contactor control Downstream contactors integrity check Fault reset Fault inhibition Automatic restart Operating time, Altivar 71 on-power time etc.