Date of download: 10/2/2017 Copyright © ASME. All rights reserved. From: Ability of a Novel Foot and Ankle Loading Device to Reproduce Loading Conditions in the Standing Position During Computed Tomography J. Med. Devices. 2015;9(4):044506-044506-4. doi:10.1115/1.4031100 Figure Legend: Loading device used in this study. Three main parts: a foot plate, a backboard, and shoulder pads. Weight plates were hung from the hook attached to the rope for loading.

Date of download: 10/2/2017 Copyright © ASME. All rights reserved. From: Ability of a Novel Foot and Ankle Loading Device to Reproduce Loading Conditions in the Standing Position During Computed Tomography J. Med. Devices. 2015;9(4):044506-044506-4. doi:10.1115/1.4031100 Figure Legend: Measurement method. (a) Standing condition measurements and (b) measurements taken with the loading device in use. (c) Representative footscan and method for calculating the center of pressure. Pressure is indicated by the color scale from red (high) to blue (low). The medial–lateral direction = a/b: the distance from the medial tangents of the hindfoot and forefoot to the center of pressure over the distance between the medial and lateral tangents. The anterior–posterior direction = c/d: the distance from the trailing edge of the heel to the center of pressure over the length of the foot.