Thermomax HP400/450 Low Inclination Heat Pipe System with Temperature Limitation

The Low Inclination kit has been developed to overcome some of the limitations of the Heat Pipe collector and increase its installation flexibility, making it suitable for use in a larger number of applications and where the original Thermomax HP couldn’t be used. The standard HP400/450 system can only be mounted at inclination angles between 20⁰ and 75⁰. Addition of the new Low Inclination kit allows the collector to be mounted at inclination angles down to 10° and also up to 90°. The new kit makes the system especially suited for industrial flat roof applications, where high ballast loads can now be avoided thanks to the low wind load due to the reduced inclination.

How it workS Standard 20⁰ Flat Roof Mounting kit (KSK0446) can be converted into 10⁰ Flat Roof Mounting kit by simply adjusting feet and hinge positions. Standard 20⁰ Flat Roof Mounting kit 10⁰ Flat Roof Mounting kit

How it workS Now attach Manifold Elevation Brackets (KSK0461) to increase manifold incline to 15⁰. 10⁰ Flat Roof Mounting kit + Manifold Elevation Brackets (2 pcs) Manifold Elevated at 15⁰

How it workS Assembled collector height is less than 550mm – low visual impact and reduced wind load! <550mm

FEATURES & BENEFITS First low inclination Heat Pipe collector with temperature limitation device (90°C on HP400 or 135°C on HP450) Combines high efficiency and safety features of Thermomax HP collectors with flexible installation of DF model Enables Heat Pipe collectors to be installed in a wider range of applications, where only Direct Flow model was suitable Low visual impact – assembled collector is less than 550mm high! Low wind impact – capable of withstanding strong winds; low ballast Dry connection between the manifold and tubes allows for replacing a tube without draining down the whole system Suitable for both domestic, commercial and industrial applications Up to 20 years guarantee on evacuated tubes

SYSTEM COMPONENTS 1 2 3 & 4 5 & 6 7 No. Product Code Description 1 KSK0446 Thermomax HP400/450 Flat Roof Kit Elevated at 10° to 20° 2 KSK0461 Manifold elevation brackets (2pcs) 3 KSK0284 HP400/450 2m² manifold 4 KSK0285 HP400/450 3m² manifold 5 KST0053 Thermomax HP400 90°C (box of 10 tubes) 6 KST0054 Thermomax HP450 135°C (box of 10 tubes) 7 C0673 Thermomax Connection Kit 2 3 & 4 5 & 6 7

Visit us at: www.kingspansolar.com THANK YOU ANY QUESTIONS? Visit us at: www.kingspansolar.com