Measurement Equipment Delta System Training

Basic Layout FRONT PANEL Torque Indicator lights On / Off Switch UP/Down Left /right Keys Alpha/Neumeric Keypad ‘Enter’ key Printer key Escape key Validate key

Rear View Digital Transducer Input PC Input Input - Output Battery Charger & indicator Transducer Input

RESULTS PARAMETERS DOWNLOADING SERVICE MAINTENANCE Delta 4000 2.0a MENU Delta 4000 2.0a RESULTS PARAMETERS DOWNLOADING SERVICE MAINTENANCE PRESS ‘DOWN’ BUTTON

ACQUIS ITION ACQUIS ITION RESULTS RESULTS PARAMETERS PARAMETERS MENU Delta 4000 2.0a ACQUIS ITION RESULTS PARAMETERS DOWNLOADING SERVICE ACQUIS ITION RESULTS PARAMETERS DOWNLOADING SERVICE PRESS ‘ENTER’

PARAMETERS PARAMETERS TASK PRINTER SERIAL LINK PRESS ‘ENTER’

PARAMETERS TASK SELECT MODIFY CREATE COPY DELETE

PARAMETERS TASK SELECT MODIFY CREATE COPY DELETE PRESS ‘ENTER’

TASK Name : Mode : Standard Bw : 128 Hz Tran : CMD4001 S /N : CREATE TASK BLACK DIAMOND Anything with a in front of it has PRESET numbers. SELECT WITH or Left or Right button TASK Name : Mode : Standard Bw : 128 Hz Tran : CMD4001 S /N : Unit : Nm BandWidth DEFAULTS to 128 Hz DO NOT CHANGE TRANSDUCER You MUST select the CORRECT tranducer. UNITS SELECT the UNIT you want to measure .

TASK Unit : Nm TORQUE Instr : 10.000 Tol : +/- 10 % [9.000 - 11.000] CREATE TASK TASK Unit : Nm TORQUE Instr : 10.000 Tol : +/- 10 % [9.000 - 11.000] N.meas.: 50 PRESS ‘DOWN’ BUTTON

TASK N.meas.: 50 Threashold Meas. : 0.75 Reset : Manu Curve Param….. CREATE TASK TASK N.meas.: 50 Threashold Meas. : 0.75 Reset : Manu Curve Param….. 1 Detail PRESS ‘DOWN’ BUTTON

Delta 4000 2.0a Reset : Auto Thres : 50 % Time : 0.100 s Curve Param….. 1 Detail Curve Param….. 1 Detail

CURVE PARAMETERS Delta 4000 2.0a CURVE Threashold – 0.00 Time -- 2 sec

down to PARAMETER and press ENTER TASK is highlighted so press ENTER SUMMARY - to CREATE a TASK ESC to main menu down to PARAMETER and press ENTER TASK is highlighted so press ENTER down to CREATE and press ENTER cursor flashing on ‘Name’ - INSERT NAME down to TRANS - SELECT CORRECT TRANSDUCER down to TORQUE INSTR: insert TARGET TORQUE down to THREASHOLD Meas. :set to 20% of Target VAL THAT’S IT !! - press to ACCEPT CHANGES PRESS ESCAPE UNTIL THE ‘ACQUISITION’ SCREEN

ACQUIS ITION RESULTS PARAMETERS DOWNLOADING SERVICE ESC ESC MENU ESC TAKES YOU TO THE ‘MAIN MENU’ ESC Delta 4000 2.0a ACQUIS ITION RESULTS PARAMETERS DOWNLOADING SERVICE

Delta 9.53 Nm 4000 St P P T aR Mes : 12 / 50 V 2.0 a 12 - ‘TASK NAME’ FRONT SCREEN 12 - ‘TASK NAME’ 4000 Delta 9.53 Nm Mes : 12 / 50 St P P T aR V 2.0 a 10 :25

9.53 Nm St P aR St P aR [-] 12.42 + 10 % 9.500 X 9.476 Mes : 12 / 50 PRESS THE ‘UP’ BUTTON PRESS THE ‘RIGHT’ BUTTON PRESS THE ‘RIGHT’ BUTTON 12 - ‘TASK NAME’ 9.53 Nm Mes : 12 / 50 [-] 12.42 + 10 % 9.500 X 9.476 St P aR St P aR 10 :25

Highlight as required and ENTER Results To ‘see’ RESULTS ESCAPE to menu DOWN to RESULTS & ENTER - results menu displays;- RESULTS MEASUREMENTS CURVE STATISTICS Highlight as required and ENTER

9.53 Nm 18/10/02 12 :10 :37 Results - View MEASUREMENTS Mes : 12 / 50 ‘TASK NAME’ 12 9.53 Nm Mes : 12 / 50 18/10/02 12 :10 :37 Reset meas. LEFT arrow - lets you SCROLL - measurements

9.53 Nm 18/10/02 12 :10 :37 Results - PRINT MEASUREMENTS Mes : 12 / 50 ‘TASK NAME’ 12 9.53 Nm Mes : 12 / 50 18/10/02 12 :10 :37 Reset meas. PRESS PRINT Key brings up a menu

Results - PRINT MEASUREMENTS 12 - ‘TASK NAME’ Periph. : Printer Header : Yes Format : Standard Date : 18 / 09 / 02 Time : 12 : 10 : 47 VAL Press VALIDATE - screen asks DO YOU WANT TO PRINT ? NO YES

STATISTICS MENU Statistics TARGET + Tolerance are set up in the TASK Once set up to VIEW / PRINT a STATS -ESC to menu Select RESULTS & highlight STATISTICS - press ENTER Select SCREEN or PC for output

CURVES & JOINT ANALYSIS Curve Parameters are set up in the TASK menu Once set up to VIEW / PRINT a CURVE -ESC to menu Select RESULTS & highlight CURVE - press ENTER Select SCREEN or PC for output

Joint Analysis

Joint Analysis What information about the fastener & joint can you get from this simple graph ??? TIME Torque 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 1.0 2.0 3.0 4.0 5.0 6.0

Joint Analysis 1.0 2.0 3.0 4.0 5.0 6.0 Torque TIME 1.0 2.0 3.0 4.0 5.0 6.0 Torque TIME 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

It’s the CHANGE POINTS on the curve that are the INDICATORS

Joint Analysis Typical curve - self tapper into sheet metal (Through Hole) 1.0 2.0 3.0 4.0 5.0 6.0 Torque TIME 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

Roller Torque (non shut off clutch) FINAL TORQUE dependent on the number of times the clutch slips TIME SECONDS Torque 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 10 20 30 40 50 60 Rundown Phase SHUT OFF Application Phase

Delta 4000 2.0a ESC VAL PRESS ‘DOWN’ BUTTON PRESS ‘ENTER’