Garland’s White-Knight® Plus/ White-Stallion® Plus System

Features & Benefits Chemically Engineered Reinforcement The Polymers Incorporated in this High Strength Urethane Give it 2400 psi./in. of Tensile Strength Multi-Surface Restoration White-Knight Plus/ White-Stallion Plus Can be Used to Coat an Entire Aged Single-Ply, Metal, Smooth BUR and Modified Bitumen Roof System Reduced Application Labor Eliminating the Need for Secondary Embedded Reinforcements Drastically Reduces Labor and Application Time

Surface Preparation The Surface Must be Clean, Sound, Dry and Free of Any Materials That Would Inhibit Proper Adhesion of The Coating To Achieve a Suitable Surface, Prior to the Application of the Coating, the Use of Industrial Cleaner, Scraping, Power Booming, Vacuuming or Other Means May be Required Cleaning Should Always be Performed Observing Responsible Trade Practices and Cleaner Residue From Incomplete Rinsing of Low Lying Areas Should Be Avoided In Any Case, Any Existence of Talc or Other Separator Agents on the Roofing Surface is Not Acceptable

White-Knight Plus/ White-Stallion Plus Base Coat Benefits of White-Knight Plus/ White-Stallion Plus Base Coat Tinted Base Coat Ensures Contractor Applies Coating at Proper Coverage Rates by Visually Identifying Where the Finish Coat Needs to be Applied Heavier

White-Knight Plus/ White-Stallion Plus Benefits of White-Knight Plus/ White-Stallion Plus Cool Roof Coatings Help Reduce Building Energy Costs Provides UV Protection for Membrane System Extends the Life Cycle of the Waterproofing Membrane Extreme Performance 2400 psi Tensile Strength 340% Elongation 0.87 Initial Reflectance 0.89 Initial Emittance SRI 110 (LEED Standard 78)

Application Excellence SinglePly

Single-Ply Application Rates White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) (32 Wet Mils) Over All Seams, Flashings and Penetrations White-Knight Plus at 2 Gallons Per Square (0.84 l/m2)(32 Wet Mils) Over Entire Roof

Make Necessary Repairs White-Knight Plus/ White-Stallion Plus Over Single-Ply EPDM, PVC, TPO and CSPE Power Wash Make Necessary Repairs Top Coat Application Finished Roof

Application Excellence Modified Bitumen

BUR & Modified Bitumen Application Rates All-Knight Primer at ½ Gallon Per Square (0.21 l/m2) 8 Wet Mils Only Needed on New Systems White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils

White-Knight Plus/ White-Stallion Plus Over BUR & Modified Mineral Modified Completed System

Application Excellence Metal

White-Knight Plus/ White-Stallion Plus Application Rates Prime Metal Always Perform an Adhesion Test on Metal White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over All Seams, Flashings, Fasteners and Penetrations White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over Entire Roof

White-Knight Plus/ White-Stallion Plus Over Metal Power Wash Prime Roof System Finished Roof Base Coat Seams & Fasteners Top Coat Application

Text Slide Text

Summary White-Knight Plus/ White-Stallion Plus is a Urethane Based Roof Coating Designed to Improve the Life Cycle and the Energy Efficiency of Your Roof By Reflecting the Sun’s Harmful Rays as Well as Adding Waterproofing Protection to Your System These Systems Provide a White ENERGY STAR®, Title 24, LEED®, and CRRC Rated, Reflective Surface These Systems Can Save Your Customer Money by Reducing the Building’s Operational Energy Costs as Well as Their Maintenance Costs These Systems Will Extend the Life of Your Roofing System by Reducing The UV Degradation of Your Membrane