R&S®ETH Handheld TV Analyzer Product Marketing Broadcast T&M

How to use this presentation… This is a set of slides which describe all features of the R&S®ETH Handheld TV Analyzer. It is meant as a collection of slides from which you can pick the ones which are of interest for your audience. The parts describing the DVB-T receiver and the ISDB-T receiver are redundant. Please select the one which is of interest for your audience. These slides do not include any company confidential information (e.g. road map, product strategy, pricing policy), so you can use them for customer presentations as well as for a wide audience.

Contents Introduction and major applications Measurement functions in detail Instrument characteristics and operation Models, options, and accessories

Contents Introduction and major applications Measurement functions in detail Instrument characteristics and operation Models, options, and accessories

R&S®ETH Handheld TV Analyzer Portable digital TV analysis up to 3.6 GHz / 8 GHz

Application: Non-vehicular coverage measurements Coverage measurements at Airports Railway stations Pedestrian areas Private households Many potential TV viewers Out of reach for test vehicles Analyzer requirements Handheld Battery powered High sensitivity High measurement speed

Application: Installation, service, maintenance of gap fillers Situated in remote locations Low power, but challenging specifications for Signal quality (MER) Shoulder attenuation Out-of-band emissions Analyzer requirements High precision Multi-functional Portable

Four instruments in the palm of your hand - R&S®ETH Network Analyzer TV Analyzer Power Meter Spectrum Analyzer

Contents Introduction and major applications Measurement functions in detail DVB-T/H test receiver Instrument characteristics and operation Models, options, and accessories

DVB-T and DVB-H analyzer Measurement list (1/2) Excellent MER of 45 dB (typ.) Optional internal pre-selector All parameters on one screen Power Crest factor Coding settings Signal quality indications MER, EVM, BER, PER ETH demodulation settings read from TPS TPS info display

DVB-T and DVB-H analyzer Measurement list (2/2) Demodulator setting „FEC Lock Not Required“ Allows measurement down to C/N = - 3 dB Facilitates coverage measurements close to sensitivity threshold

DVB-T and DVB-H analyzer Constellation diagram Visualization of signal quality Simultaneous display of Constellation Basic instrument settings numerical parameters Hierarchical modulation supported alpha = 1, 2, 4 BER for HP or LP stream

DVB-T and DVB-H analyzer OFDM spectrum Display of DVB-T / DVB-H spectrum Automatic measurement of Shoulder attenuation acc. to ETSI TR 101 290 Signal power In-band freq. response Channel bandwidths 8 MHz 7 MHz 6 MHz 5 MHz

DVB-T and DVB-H analyzer MER(k) measurement Display of MER over OFDM carrier number Detection of Narrowband interference effects (not visible in constellation diagram) Carrier leakage (centre carrier) Use auto peak detector to show true minimum value Number of carriers > number of pixels ! Useful to adjust I/Q DC offset

DVB-T and DVB-H analyzer Echo pattern Channel impulse response Echo profile including Multi-path propagation SFN characteristics SFN pre-echoes Guard interval Peak list in descending order Adjustable threshold

Contents Introduction and major applications Measurement functions in detail Spectrum analyzer, network analyzer, power meter Instrument characteristics and operation Models, options, and accessories

Spectrum analyzer Fully featured spectrum analyzer Frequency range 100 kHz … 3.6 GHz resp. 8 GHz Resolution bandwidth 100 Hz … 3 MHz in 1-3-sequence Trace detectors max peak, min peak, auto peak, sample, RMS Trace functions clear/write, max hold, min hold, average, view Comprehensive marker functions normal, delta, noise, peak search, etc. Application: Verify the emmission mask of a transmitter

Network analyzer (1/2) Transmission and reflection measurement Optional for R&S®ETH models with internal tracking generator Scalar and vector measurement 1-port and 2-port Open/short/load/through calibration Transmission measurements with basic instrument Reflection measurements require external VSWR bridge

Network analyzer (2/2) Distance-to-fault measurement Optional for R&S®ETH models with internal tracking generator Special mode of vector reflection measurement Displays reflection peaks over cable length graphically or as a list Cable model editor For user-defined cable types Many standard cable types pre-defined

Power meter Highly accurate broadband power measurements Terminating power sensors R&S®FSH-Z1 up to 8 GHz R&S®FSH-Z18 up to 18 GHz Directional power sensors R&S®FSH-Z14 up to 1 GHz R&S®FSH-Z44 up to 4 GHz

Contents Introduction and major applications Measurement functions in detail Instrument characteristics and operation Models, options, and accessories

Designed for portable use All functions within reach of your fingers Softkeys Hardkeys for most important functions Numeric keypad Rotary knob with ENTER function Arrow keys Form factor Small 194 mm × 300 mm × 144 mm Light-weight only 3.3 kg incl. battery Handy

Outdoor operation without compromises Rugged housing Splash-water proof Connectors under protective caps Accessory rain cover available Easy-to-read display Bright 6.5‘‘ VGA color display High contrast B/W mode for extreme sunlight

Accessory external GPS receiver Garmin™ professional GPS receiver Available as R&S®HA-Z240 from Rohde & Schwarz Connect to ETH auxiliary port Indicates geographic position as latitude and longitude Enhances reference frequency accuracy

Battery operation Powerful Li-ion battery Easy to replace Accessories ≥ 4.5 hours in spectrum analyzer mode ≥ 2.5 hours in TV analyzer mode Easy to replace Accessories Spare battery AC battery charger 12 V / 24 V DC car adapter

Convenient data exchange with PC Windows PC software R&S®ETH View Included with R&S®ETH Connection via LAN or USB Data transfer from analyzer to PC Measurement results Screenshots Instrument settings Data transfer from PC to analyzer Limit tables Transducers and cable models Instrument configurations Remote signal monitoring

Data storage and documentation Measurement results stored to R&S®ETH internal memory SD/SDHC card USB memory stick Dedicated screen shot hard key Capture and store screen shots with one keystroke Test result documentation at the push of a button

Contents Introduction and major applications Measurement functions in detail Instrument characteristics and operation Models, options, and accessories

R&S®ETH models and functions Freq. range 3.6 GHz Freq. range 8 GHz Network analyzer *) Spectrum analyzer DTF measurement *) TV analyzer Power meter *) Pre-selector included optional *) requires external accessory

Comprehensive choice of accessories hard case soft bag antennas sensors VSWR bridges cal kit GPS receiver matching pads spare battery charger memory cards rain cover holster … and many more

R&S®ETH Handheld TV Analyzer Precise and versatile. Portable digital TV signal analysis from Rohde & Schwarz.