Quotation GAA-350-90 CNC TR12 VERTICAL Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Quotation GAA-350-90 CNC TR12 VERTICAL *This image corresponds to the GAA-350-90 CNC TR12 VERTICAL Technical Details: Drilling /tapping unit D.12 and M10 with 3000 RPM and Y manual adjustment of 100mm Motor 2,5HP Blade dimensions Ø350 x 3,3 x 32 z.108 Negative angle Feeder Ballscrew travel is 700mm Air consumption is 20 litres / minute 3 x horizontal and 3 x vertical pneumatic clamping cylinders Venturi Sprayer system ( optional Lubetools) Omron CNC controller, servo motor and color touch screen panel installed 10 programs and 30 lines on each program for cuttting list and programming 20 parts can be stored in the library including length, Quantity and positioning of drills Approximate dimensions of the machine 1,50 x 1,20 x 0.970 ( 390Kg) Price of the machine according to specifications is 17.875,00 EUR/NET Options, Blade saw speed inverter, price is 442,00 Eur/net Lubetools, price is 552,50 Eur/net Ethernet connection+PC software, price is 1495,00 Eur/net Air cleaning on working area, price is 175,00 Eur/net Vacuum Start/Stop connection, price is 180,00 Eur/net Exworks from La Roca del Valles – 08430 – Barcelona Warranty: 12 months Quotation validity: 3 months Delivery time is 8-12 weks, to confirm on order www.tronzadorasmg.com

Quotation GAA-350-90 CNC TR12 VERTICAL Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Quotation GAA-350-90 CNC TR12 VERTICAL The machine is a CNC controlled machine (X axis) with one drilling unit TR12 ( T stands for Drilling, and R stands for taping) operating individually. The machine accepts a library of 20 pieces stored on memory and which can be selected to create cutting list. The standard quantity of drills are 10, however with an additional software the machine accepts repeteable sequences of multiple drills, www.tronzadorasmg.com

Samples: Toolings and supports to the machine: drill tool Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: Toolings and supports to the machine: drill tool Nylon Back supports for this profile. The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com

Tronzadoras MG, S.A. P.I. Font de la Parera, s/nº 08430 – La Roca del Vallès (Barcelona) Tel. 93.842.41.60 www.tronzadorasmg.com info@tronzadorasmg.com Samples: The three drills of this profile needs to be programmed in the machine. The quoted machine have already included an option to select the depth to drill. The vertical drilling head have installed three sensors which have to be adjusted manually accordign to the drill bit to be used. The software will accept to define the sensor for every hole. By using a bidiametral drill bit of three Ø (maximum Ø 20), we might be able to define the depth according to the drill bit and therefore produce the following piece: The toolings needs to be installed and adjusted at the beginning of the production of these pieces. The TR12 units might also need to be adjusted manually. Toolings and supports to the machine: drill toolings Nylon Back supports for this profile. The toolings needs to be installed at the beginning of the production of these pieces. Problem with part #1: NO problems www.tronzadorasmg.com