RASPBERRY PI WORKSHOP

Setting LCD Touchscreen on Raspberry Pi 3

LCD Touchscreen A touchscreen is an electronic input device that the user can control with single or multi-touch gestures. The touchscreen enables the user to interact directly with what is being displayed, rather than using a mouse, touchpad, or any other intermediate device.

Install your raspberry using Win32 Disk Imager with an OS which is not NOOBS. Here is an OS which is not NOOBS: https://www.raspberrypi.org/downloads/raspbian/ Do not plug the LCD to your raspberry pi yet and use lxterminal or SSH to set-up. SSH Secure Shell (SSH) is a UNIX-based command interface and protocol for securely getting access to a remote computer. SSH allows you to connect to your server securely and perform Linux command-line operations. Software: Putty and Xming

Setting up SET UP YOUR LOCAL NETWORK AND WIRELESS CONNECTIVITY ENABLE SSH SET UP YOUR CLIENT Termius

How to: 1. Configure your Pi: Set as: Boot Option -> Desktop/CL1 ->Desktop Autologin Advance Option -> Expand Filesystem Interfacing Option ->SP1 -> Enable Interfacing Option -> I2C -> Enable It will automatically reboot. 1 sudo raspi-config

Download and Install LCD driver:  Unzip the file: then:           To toggle the mode to LCD display: 1    wget http://www.waveshare.com/w/upload/4/4b/LCD-show-161112.tar.gz 1    tar xvf LCD-show-161112.tar.gz 1  cd LCD-show/ 1 chmod +x LCD35-show ./LCD35-show

. Now, turn off your raspberry by removing the power supply then plug your LCD to your raspberrypi. 3. After turn on your raspberry pi, the RPi LCD is ready to use.