Elastomeric Wall Coating: Garland’s Tuff-Coat™ Systems

Tuff-Coat & Tuff-Coat Textured Provides a Breathable Layer of Protection While Allowing Water Vapor To Escape From The Structure Provides a Heavy-Bodied Protection Even Over Rough Textured Cinder Block Reduces the Building’s Operational Maintenance Costs by Reducing Surface Temperatures Extends the Life of Wall System By Reducing the UV Degradation of Surfacing and Mortar Joints Resists Absorption of Fumes and Fresh/Salt Water Low-Odor Application VOC Compliant in All States

Preparation - Steps Wall Inspection – Is the Wall a Good Candidate for Restoration? Analytical Testing – Further Analysis Structural Evaluation Repair Defects Cracked Mortar Joints Chips or Holes Remove Dust, Dirt & Debris Restore Weatherproofing Integrity Tuff-Coat will Protect From Harmful UV and Extend the Life of the Wall

Common Wall Issues These Types of Wall Issues Need to be Repaired Before A Wall Can be Coated Blown Brick or Blown Stone Peeling or Cracked Paint Cracked, Loose or Blown Stucco Failed Masonry Tuck Pointing

Preparation The Most Important Factors When Applying Any Type of Masonry or Wall Coating Is… Preparation, Preparation, Preparation! If the Substrate Is Poorly Prepared, No Mater How Well the Coating Is Manufactured, It Will Simply Not Perform!

Surface Preparation The Surface Must Be: Preparation May Include: Clean, Sound, Dry and Free of Any Materials That Would Inhibit Proper Adhesion of the Coating Preparation May Include: Industrial Cleaner, Scraping, Power Washing or Other Means May Be Required Cleaning & Rinsing Cleaning Should Always Be Performed Observing Responsible Trade Practices Make Sure to Always Thoroughly Rinse the Wall to Remove Any Cleaner Residue

Tuff-Coat System Features & Benefits Extended Life Protects Against UV Exposure and Premature Aging of Wall Reduces Wall Degradation Provides Dampproofing Protection Building Aesthetics & Health Reduces Dirt Pick Up and Mold Growth Provides a Washable Surface Designed for a Wide Range of Surfaces Stucco Concrete EIFS Brick & Concrete Masonry Units (CMU) VOC Contents Tuff-Coat <50 g/l VOC Content Tuff-Coat Textured <50 g/l VOC Content

Application Rates Tuff-Coat System Tuff-Coat Textured System Approximately 100-200 sq. ft./gal. per Coat Depending Upon Texture and Porosity of the Surface and 2 Coats Are Required Cinder Block and Stucco Will Be 200 sq. ft./gal. Brick Will Be 100 sq. ft./gal. Tuff-Coat Textured System Approximately 60-80 sq. ft./gal. per Coat Depending Upon Texture and Porosity of the Surface and 2 Coats Required

Tuff-Coat Benefits of Tuff-Coat System Benefits Low-Odor Application Help Reduce Building Maintenance Costs Provide UV Protection for Wall System Extend the Life Cycle of the Wall System Low-Odor Application Water-based Acrylic Chemistry with Little to No Odor Quick Cure Time Allow it to Cure 4-6 Hours Between Coats As Seen in the Above Example of Wall Coating Performance, a Cool Coating Can Result in Over an 18°F Difference on a 75°F Day. It’s Easy to See That Tuff-Coat, When Applied to the Buildings Vertical Surfaces, Can Cool the Surface Temperatures of Your Buildings, Saving Energy and Cooling Costs.

Tuff-Coat Textured Benefits of Tuff-Coat Textured System Benefits Help Reduce Building Maintenance Costs Provide UV Protection for Wall System Extend the Life Cycle of the Wall System Textured Coating Hides Imperfections and Gives a Consistent Appearance Low-Odor Application Water-based Acrylic Chemistry with Little to No Odor Quick Cure Time Allow it to Cure 4-6 Hours Between Coats

Adding Texture To Tuff-Coat Set Bucket On a Level Surface Begin to Mix to Get Even Color Add Tuff-Coat Texture and Mix Mix Until a Uniform Appearance is Achieved Note: Spray Application is Not Possible With Tuff-Coat Textured

Summary Tuff-Coat & Tuff-Coat Textured are Water-Based Wall Coatings Designed to Improve the Life Cycle and the Energy Efficiency of Your Structure By Reflecting the Sun’s Harmful Rays These Systems Provide Additional Mils of Dampproofing to Protect Your Aging Wall System and Preserve Newer Constructions These Systems Can Reduce the Building’s Operational Maintenance Costs These Systems Will Extend The Life of Walls By Reducing The UV Degradation and Exposure