High Density Polyethylene Pipe and Fittings

Who are Geberit ? A Swiss company founded in 1874, ‘Geberit’ have developed into one of the worlds largest manufactures of sanitary products, such as; Cisterns Electronic Tapware & Urinals Hot & Cold Piping Systems HDPE Drainage Systems Reece have exclusivity on all Geberit HDPE products nationally.

Geberit Products Geberit are world leaders in design and fabrication of technically advanced piping systems, including: Geberit HDPE – D.W.V. , Trade waste, Chemical waste Geberit Silent PE – Acoustic drainage applications Geberit Pluvia – World class Siphonic Roof Drainage system Geberit Sovent – Innovative Soil and Waste Drainage System

Geberit HDPE Applications Restaurants - Greasy Waste Abattoirs - Greasy Waste Industrial - Trade Waste Car/Truck Wash - Trade Waste Laboratories - Trade Waste Hospitals - Trade Waste Any drainage applications where Cast Iron, Copper, 70/30 Brass, Stainless Steel, Earthenware or even PVC would normally be used.

MOVIE3.GEBERIT HDPE.MPG

Geberit HDPE Applications The following photo`s highlight the effectiveness of Geberit HDPE for Greasy Wastes (both taken after 3 months). Geberit HDPE Cast Iron

Geberit HDPE Applications The Geberit HDPE System can be installed by all plumbers In Ground In Concrete Suspended It is lightweight and easy to manoeuvre and more impact resistant than traditional drainage type products 2% Soot (Carbon ) is added to Geberit HDPE during the manufacture to provide UV Stabilization for outdoor use

Geberit HDPE Jointing methods Butt Weld Electrofusion Ring Seal Threaded Expansion Flanged

Geberit HDPE Resistance Impact Chemicals / Alkaline Unstable Ground & Tree Roots Abrasion Hot & Cold Water (-30oC to 80oC) Grease

Geberit HDPE Adaptation Geberit HDPE can be adapted to traditional type materials using transition fittings: Ring Seal Sockets (Page 8 + 9) Trap and Reducing Adaptors (Page 11+ 12) Earthenware and Copper Moulded fittings (Page 12) Note: Fernco/Plumbquick Rubbers are not recommended for use in Geberit installations.

Geberit Butt Welding 40mm to 160mm can be joined using the Geberit “Media” welder. Also from 40mm to 315mm the “Universal” welder can be used. 50mm, 56mm 63mm & 75mm can be welded by hand using the Geberit heat plate and stand

Geberit Electrofusion Welding The “Blue E/F Machine” can join up to 160mm Geberit, providing the power source is 240V mains power. 200mm, 250mm & 315mm must be fused with the Geberit Start Switch. Centering Rings are also required. Bubble Wrap must remain on until completely cooled.

Geberit Electrofusion Techniques Before inserting pipes and fittings into an E/F coupling, they must be cleaned to remove the layer of oxidation that builds up on the surface of the HDPE material. Up to 125 mm can be cleaned with course sandpaper (80 grit or above) or emery cloth. 160mm and above must be scraped (with a paint scraper or equivalent).

Geberit Sovent Drainage System

Geberit Sovent Drainage System Geberit Sovent is a simple, advanced and cost efficient plumbing system

Geberit Sovent Drainage System Eliminates hydraulic plug Limits the velocity of the air and waste flow Ensures venting action of the stack and branches Combines branch stack and branch flow in an optimal way Provides multiple connection possibilities with one single fitting 110mm size only Hydraulic Plug Sovent Conventional

Geberit Sovent Drainage System Single stack for high rise buildings with one fitting dimension is possible. Multiple connection of branches to one fitting Cost saving compared to conventional drain and vent system. The fitting is a 40-year-old design that has a faultless track record Meets the new Australian Standards

Australian Projects Casino Towers includes: - 34 Levels - 207 1/2/3 Bedroom Apartments 12 Stacks 440 x 110mm Geberit Sovent Fittings

Australian Projects Pivotal Point Apartments, Gold Coast 22 Storey Apartment Building 15 Stacks 255 x 110mm Geberit SOVENT fittings

Australian Projects Aurora Tower, Brisbane 69 Storey High (220 Meters) 480 Apartments Single Stack Design 864 x 110mm Geberit Sovent Fittings