Municipal Association of Victoria Local Government Rates and Revaluations 11 May 2016

Session 1. Financial Management Financial Reporting Statutory Obligations Financial Principles Council Plan/Strategic Resource Plan/Annual Budget/Annual Report Identifying important financial indicators including: Surplus/deficit Cash Debt / debt reduction Capital works Depreciation

Financial Reporting Statutory Obligations LGA - Part 7, Division 1, Sections 136 to 150 Principles of sound financial management Budgeting and reporting framework Borrowings and investment LGA - Part 6, Sections 125 to135 Council Plan, Strategic Resource Plan, budget, annual report, Performance statement LG (Finance & Planning) Regulations 2014 Budget Audited Annual Report Quarterly Financial Statements

Financial Management Council Plan Strategic Resource Plan Identifies the needs and issues to be dealt with in the municipality Must be prepared by 30 June Strategic Resource Plan Is included as part of a Council Plan Sets out the financial and human resources required to achieve objectives in Council Plan Council Budget Estimates revenue to be collected from government funding and loans to determine amount needed in rates Draft budget open for comment for 28 days Must be submitted to the government by 30 June Annual Report Reviews a council’s performance against Council Plan Must be submitted to the government by 30 September

Identifying Important Financial Indicators Is there an underlying surplus? - Long term survival Is Working Capital positive? Is there enough cash? - Short term survival Is debt in control? Is depreciation increasing due to lack of maintenance? Are capital works on time and at their budgeted cost? What are the contingencies and commitments?

Council Budgets: points to remember Recurrent deficits Operating and capital Asset maintenance and renewal Understand good and bad debt (intergenerational equity) Physical services - capital works, costing, plant acquisitions & disposals, and maintenance. Human services – grant funding and relationships to other tiers of government

Session 2: Funding of local government Where funding comes from Cost Pressures Intergovernmental funding Cost shifting State levies collected by councils Rate cap 2.5 per cent Asset management: renewal gap

LG Funding Sources 2014-15 Victorian local government recurrent revenue was $8.7 billion: 56.2% or $4.9 billion in rates (at the extremes 29% and 75%) 16.0%or $1.4 billion in fees, fines and charges 9.4% or $816 million in specific purpose revenue grants 11.1% or $967 million in general purpose revenue payments* 7.3% or $636 million from other (E.g. interest, contributions) *Includes 50 per cent payment of general purpose grants for 2015-16 brought forward by the Commonwealth Government Local government collects 3.6 cents of every $1 raised in Australian taxes. The Commonwealth collects 79.9% (including GST) and the States 16.5% of total taxation revenue.

Intergovernmental Funding GST implemented in 1999 - Australian Parliament rejected that states should fund local government through GST responsibility remains at the Federal level Federal Financial Assistance Grants to local government have declined from 1.2 per cent in 1993-94 to 0.53 per cent of Commonwealth revenue in 2016-17 Funding indexed by CPI & population (not real costs growth) Budget cut indexation from 2014-15; Grants will stay the same in dollar terms and will decline per head and in inflation adjusted terms

Cost shifting Cost shifting is a constant funding pressure faced by councils and occurs when Commonwealth and State programs transfer service responsibilities to local government with insufficient funding, or grants which don't keep pace with delivery costs. Services include kindergartens, libraries, school crossings and home and community care. Shortfall is either paid for by ratepayers, service cuts and/or reduced asset maintenance/renewal spending

Cost shifting examples

State Levies collected by councils The State Government requires councils to collect state levies, usually included in rates notices, to fund State agencies and programs Landfill levies are being progressively increased from 2010 Landfill levies are budgeted at $200 million in 2016-17, or 4.1% of rates State introduction of a property-based fire levy in 2013 which is budgeted to raise $674 million through rates. In 2015-16, the Fire Services Property Levy increased by 12.6 per cent

Rate Capping The State Government’s rate capping framework will come into effect in the 2016/17 financial year Average rates will be capped at the Consumer Price Index (CPI) or 2.5 per cent, with any rate increases above CPI requiring approval by the Essential Services Commission (ESC) Nine councils of 79 have applied to the ESC for a rate cap variation Rate capping leaves councils with two main choices, reduce services relied on by communities or reduce capital spending to maintain assets Rates are currently capped in NSW and national studies continue to show the quality of NSW local infrastructure is lower than other states, primarily as a consequence of years of rate capping

Asset Renewal Gap Local government is capital intensive: $79 billion in assets level of government that spends the highest proportion of its revenue on infrastructure Councils explicitly recognise deterioration of their assets for the first time in mid 1990s, but rate capping and rate cuts led to councils spending less on ageing infrastructure 2013: MAV Step Asset Program identified an annual underspend of $225.3 million, confirmed by the Auditor General Further investment is still needed by councils Deferred spending = higher costs for future ratepayers

Session 3: Council Rates What are council rates Prescribed rate process Why your rates bill won’t be 2.5% higher Comparing council rates

What are Council Rates? A property tax that uses property values as the basis for calculating how much each property owner pays Can comprise up to three components: Municipal charge (not more than 20% of total rate revenue) Waste management (garbage) charge General rate based on the ‘rate in the dollar’ Exemptions apply to crown land, charitable land, land used for religious purposes, land used exclusively for mining or forestry Primary reason for rates is to raise revenue to fund local government services and infrastructure for public benefit All property owners pay a share of rates regardless of their choice to use/not use council services, programs, infrastructure

Rating Process Draft Budget: Sets priorities to meet Council Plan objectives Identify asset maintenance and service funding needs Estimate revenue to be collected from other sources Identify amount of rates needed to meet financial responsibilities for coming year Advertise and open for public comment for at least 14 days Setting Rates: Determine any municipal and waste charges Determine rate in the dollar (balance of required revenue by the total value of all properties in the municipality) Individual property rates: multiply rate in the dollar by the value of a property, add any municipal and waste charges

Rates Example Note: there is NO connection between the amount of rates paid on a property and the services received

Why your rates bill won’t be 2.5% higher The State Government’s ‘Fair Go Rates’ is a catchy slogan for a complex policy. The 2.5% cap applies to the council’s average of all rateable properties, and does not include the garbage charge, or fire services property levy, both of which create revenue for the State Government The amount of rates paid by a ratepayer is determined by the value of their property 2016 is a revaluation year (will be discussed in depth later in presentation) which means the amount paid by many will be higher or lower than the cap, depending on whether the value of their property has increased or decreased. Councils don’t collect more money when property values increase

Comparing Local Government Rates 79 councils 31 metropolitan (including 10 Interface councils) 48 rural and regional (including 10 regional cities) Difficult to generalise about local government Each council varies in size, rate base, needs, infrastructure Municipal populations range from 3,000 to more than 292,000 Manage significantly different budgets (2013-2014) Rural council budgets average $62 million (smallest $11.4 m) Metro council budgets average $184 million (largest $629 m) Rating comparisons are problematic – especially a reliance on averages or levels paid by properties of the same value in different municipalities

Rating Comparison Example Outer metro Inner metro Rural shire Total council revenue: $155m $120m $21m Population: 170,000 100,000 8,000 Median property value: $350,000 $1,000,000 $250,000 $500,000 property: 4 bedroom, large block 2 bedroom apartment 5 bedroom on acreage

Session 4: Property Valuations Valuation Process Facts and Myths Case Study: Valuation, Revaluation and Rates Increase

Valuation Process Expert valuers appointed by councils review property values every two years Last valued on 1 January 2016 Total value of all properties in a municipality is used to strike the ‘rate in the dollar’ Up-to-date revaluations are critical to ensure property owners pay a fair and equitable share of rates Ratepayers have a right under the Valuation of Land Act 1960 to object to a valuation

Valuation Process cont… Only qualified valuers can perform municipal valuations Amount a property would sell for on a set date (1 Jan 2016) Assess market movements and recent sales/rental trends Highest and best use of the property Build profile of value levels for different areas/property types Physical inspection of a sample of properties Complex statistical models apply information to individual properties Valuer General certifies council valuations met required standards Minister declares the valuations suitable to be adopted and used The same valuations are used for State land tax

Facts and Myths MYTH Increased (or decreased) property values increase (or decrease) how much a council collects – NO (but YES for State land taxes) Valuations change the total rates collected – NO FACT Valuations are “revenue neutral” Council budget is set first and determines total amount of rates to be collected Valuations are used to apportion how the total revenue to be raised will be shared by each ratepayer

Property Revaluations Size of the pie = Council revenue to be collected (determined by budget) Slice of pie = amount each ratepayer will pay (based on value of their property) A change in property values can change the slice (amount you pay), but not the size of the pie (overall amount council collects)

Revaluation example

Revaluation Example But, what happens when councils also increase the amount of rates they collect? Suppose the council increased the amount of rates from $5,500 to $5,638 (increase of 2.5%)

Revaluation Example (Cont) 2015-16 Rates 2016-17 Rates (before rate increase) 2016-17 Rates (with rate increase) Change Due to Revaluation Total Change House 1 $1241 $1300 $1332 4.8% 7.4% House 2 $852 $1014 $1040 19.1% 22.1% Unit $685 $745 $764 8.7% 11.4% Farm $1481 $1331 $1365 -10.1% -7.9% Business $1110 $1137 -10.6% -8.3% Total $5,500 $5,638 0% 2.5%