Hytera RD98X(S) RF 50W digital repeater and RD98XS support upgrade to DMR trunking transceiver

RD98X(S) network topology Hytera DMR repeaters comparison Contents 1 RD98X(S) overview 2 RD98X(S) accessories 3 RD98X(S) network topology 4 Hytera DMR repeaters comparison

Hytera DMR digital repeater RD98X(S)

Hytera DMR RD98X target market Public safety Oil & energy Business Utility Transportation

Hytera DMR RD98X highlights Modularized design and large size color display 4 programmable buttons 50W High Power，External power amplifier to100W Build-in duplexer Multi-Level encryption（40,128,256bit） Smart digital-analog switch Advanced TDMA technology Outstanding heat dissipation RDAC Management Service Innovative operation console Accessory expansion Unlimited repeater sites IP-connection 16 Channels Modular design Analog/digital back-to-back interconnect

Hytera DMR RD98X(S) specifications Item Specifications Frequency bands 136-174Mhz, 400-470Mhz, 350-400mhz, 450–520mhz Dimensions 482.6 x 87.6 x 366 mm Weight: 8.5kg RF output power 5 – 50W, 100% full duty cycle； External power amplifier to100W Channel capacity 16 channels Audio output 1W RD98X(S) Analog conventional repeater MPT trunking transceiver Digital conventional repeater DMR trunking transceiver 2.0” TFT LCD and menu navigation knob to facilitate service and maintenance Auto detection between analog and digital modes IP linking multiple sites Support build in duplexer and external power supply Remote monitor, configure and upgrade* ( remote upgrade after V5.5) Available installation type: rack mount, desktop，wall mount,

Hytera DMR RD98XS – tier 3 migration repeater Flexible application via software or hardware upgrade: Analog conventional repeater Analog simulcast transceiver MPT trunking transceiver Digital conventional repeater Digital simulcast transceiver* DMR trunking transceiver This product can be used for different purposes as per the user’s actual needs, ensuring use efficiency. Note: An optional GPS board is needed if this product is used as a simulcast transceiver ( marked by “*” ).

Hytera DMR RD98XS – flexible tier 3 upgrade mode All in one pack mode Separated mode Power Distribution Unit Transceiver Transceiver Power Supply Switch Power Supply Unit Base Station Controller 2-carrier RF System 13U cabinet

Remote diagnostic and control Local access management Multisite access management Local registered subscribers to access the local repeater. Up to 32 ID segments Nonlocal registered subscribers to access the repeater via multisite access management. Up to 32 ID segments Greatly improved channel efficiency by use these two access control approaches !

Remote diagnostic and control Diagnosis & monitor Control & configuration Power supply monitor Power amplifier temperature monitor Forward power monitor Tx REF(reference) power VSWR(Voltage Wave Rate) monitor RSSI(received signal strength indication) monitor Repeater mode/repeater base mode Channel switch High power switch Digital knock down, restart Audio priority, mic gain Jitter buffer, color code Transmit/receive frequency Channel spacing Carrier squelch level Group/private/emergency call hang System inactivity timer (SIT) Repeater encryption IP multi-site access setting

Back to back interconnection Tx=f1, CTCSS 1 RX=f2, CDCSS 1 Analog repeater Tx=f2, CDCSS 1 Rx=f1, CTCSS 1 Tx=f1, CTCSS 1 RX=f2, CDCSS 1 Output Audio Carrier Detect GND MIC PTT Digital Tx=f3 Rx=f4 Group Call 1 Digital repeater Tx=f4 Rx=f3 Group Call 1 Tx=f3 Rx=f4 Group Call 1 Now it’s possible to let your analog radio communicate with digital radio.

RD98X(S) network topology Hytera DMR repeaters comparison Contents 1 RD98X(S) overview 2 RD98X(S) accessories 3 RD98X(S) network topology 4 Hytera DMR repeaters comparison

Accessories for RD98X(S) PWC11 DC power cable BRK09 Build-in duplexer installation kit (RoHS) PS22002 300W power supply Unit(RoHS) BRK12 Installation accessory for rack-mounted power supply （2U）(Black)(RoHS) SM16A1 IP54 Palm microphone(RoHS) SM16A2 IP67 Palm microphone(RoHS) BRK19 Wall-mount installation bracket for the repeater(RoHS) SM10A1 Desktop microphone(RoHS) BRK18 Installation bracket for power supply(RoHS) DT1(X) Duplexer(Frequency of VHF, U1, U2,U3) POA45 Surge arrester for ethernet port (RoHS)

RD98X(S) network topology Hytera DMR repeaters comparison Contents 1 RD98X(S) overview 2 RD98X(S) accessories 3 RD98X(S) network topology 4 Hytera DMR repeaters comparison

1 2 3 4 5 6 Repeater network topologies IP multi-site connection Super master service In IP multi-site connection Single site connect with PSTN 1 2 3 PSTN interconnection over IP multi-site connection Back to back over IP multi-site connection Connect with SmartDispatch 4 5 6

IP-multisite connection Site A Master repeater RD98X Site B LAN / WAN IP network Slave repeater Tx=f1 Rx=f2 Site C RD98X Slave repeaters Slave repeater Tx=f3 Rx=f4 RD98X RD62X

Super master service …… …… …… …… Master Repeater Root Master Repeater 1 Master Repeater 2 Master Repeater N …… Up to 15 Slave Repeater Slave Repeater Slave Repeater Up to 15 Up to 15 Up to 15 …… …… …… Slave Repeater Slave Repeater Slave Repeater When the master repeater enables the super master service and designates the master repeater root as its super master, it will act as a slave repeater of the master repeater root. On the other hand, it still work as a master repeater in its own network.

PSTN interconnection - single site Phone PSTN Phone PSTN Gateway Repeater Analog/digital repeater supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a group or private call to radio users.

PSTN interconnection - multi site LAN / WAN IP Network PSTN Phone PSTN Gateway Repeater Analog/digital repeater supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a group or private call to radio users.

SIP interconnection PSTN cable IP LAN cable IP PBX PSTN Phone IP Switch RD98X IP Phone IP Phone Digital repeater supports simplex voice communications between radio and SIP phone users. It allows a radio user to make a SIP phone call; or a SIP phone user to make either a group or private call to radio users.

Back to back over IP multi-site connect TR800 TR800

Connect with SmartDispatch direct connection Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server Gateway DMR radio network Channel 2 Channel 1 Single site

Connect with SmartDispatch independent repeaters DMR radio network Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server gateway Single site DMR radio network Single site

Connect with SmartDispatch IP multi-site network Dispatch center Dispatcher client IP LAN / WAN IP network SmartDispatch server gateway Master repeater Slave repeater 1 LAN / WAN IP network Slave repeater 2 Slave repeater N DMR radio network

RD98X(S) network topology Hytera DMR repeaters comparison Contents 1 RD98X(S) overview 2 RD98X(S) accessories 3 RD98X(S) network topology 4 Hytera DMR repeaters comparison

Products comparison chart HW Key Point For SW RD62X RD96X RD98X RD98XS RF output Power 1-25W 1-10W 5-50W Upgrade to Trunking N Y Port1 UART, USB / 10Pin Port2 DB26 Port3 DB9 Port4 Ethernet GPS Module LCD Colour CH Knob EndStop VOL Knob Power, Volume Local speaker Mic Interface Fan AC input Battery O Target marketing in-door commercial Portable backpack Only conventional Upgrade to trunking O : Optional N: not included Y: Standard