MicroRAE™

Agenda What is MicroRAE? Value Proposition Markets & Applications Product Features

What is MicroRAE? Wireless diffusion 4 gas monitor Man Down Alarm and GPS capability Bluetooth® Low Energy / Mesh / Wi-Fi Wireless technologies For customers that want to go beyond compliance The MicroRAE, from RAE Systems by Honeywell, is a wireless, portable four-gas detector that brings new capabilities to the ConneXt Safety Solutions (Pack, Plus, Pro and Loneworker) — with a new level of userfriendliness for operators and safety managers. This new four-gas detector, which works with either Wi-Fi or mesh networks, gives customers another reason to consider wireless gas detection. MicroRAE has integrated GPS capability, ensuring that customers can determine the precise location of the worker carrying the detector in a ConneXt Plus, Pro or Loneworker system. The MicroRAE monitors H2S, CO, O2 and LEL with an option to replace one of the sensors with HCN for firefighting applications. But even though these are the four traditional compliance-oriented gases, the MicroRAE targets customers that want to go beyond compliance. These customers, in the “proactive” and “advanced safety” segments, can use real-time visibility on gas detection to drive a culture of safety, productivity and enterprise risk management. Real time visibility to drive culture of safety, productivity and enterprise risk management

Value Proposition The MicroRAE brings a higher level of user-friendliness and flexibility to wireless gas detection. It enables real-time visibility on safety threats, so you can make faster, more informed decisions to protect your workers, prevent a crisis and optimize operations. Of course MicroRAE presents a lot of value as a device but it delivers its highest value when combined with other components of a wireless system. The MicroRAE makes it easy to get the benefits of wireless gas detection — whether you have a Wi-Fi network, mesh network or no wireless infrastructure at all (SC). The MicroRAE is compatible with all versions of Honeywell’s ConneXt Safety Solutions, giving you real-time visibility on gas status and worker location — so you can make critical decisions in real time. The MicroRAE is engineered for ease of use — by workers and safety managers — to make customer job easier and facilities safer. Real-time Visibility On Safety Threats For Faster, More Informed Decisions

Applications Advanced Capabilities, No Expertise Required Industrial Safety Fire Overhaul Lone Worker Easy to Use / Wear Policy Enforcement Man Down Alarm ConneXt Safety Solutions Man Down Alarm Easy to Use / Wear ConneXt Safety Solutions ConneXt Safety Solutions GPS Policy Enforcement Easy to Use / Wear Man Down Alarm Key Industries: Telecommunications Construction Waste Water Treatment Firefighting Oil and Gas Utilities Petrochemicals Advanced Capabilities, No Expertise Required

Product Features User Friendly Small & Ergonomic design 4.6" x 3.0(2.6)3.0" x 0.9" / 117 x 76(66)74 x 24 mm 7.03 oz / 206 g Minimal training time Simple to operate, so workers can focus on the job at hand. The detector has a tamper-proof design, so workers see only what’s necessary for basic operation Easy to hear and see —reliable alarm awareness in any environment 100dB Alarm Multi Color backlight screen & LEDs for maximum visibility in challenging conditions Vibrator Alarm User Friendly

High Quality product can be Used anywhere Product Features Designed & Manufactured by RAE Systems by Honeywell All Sensors from RAE Systems by Honeywell Wireless solution designed by RAE Systems team Rugged Stainless Steel front plate IP67 (Third Party tested) Intrinsically Safe Class I, Division 1, Groups A, B, C and D IECEX / ATEX I M1 Ex ia I Ma II 2G Ex ia d IIC T4 Gb Ta = -20°C to +60°C Ta = -20°C to +60°C Wireless Approval Initial territories covered: US/ Canada, Europe (continental), Australia / NZ Other wireless approval coverage in phases (refer to back up slide) High Quality product can be Used anywhere

Option: Cannot be used in environments hydrocarbon-chain compounds C≥6 Supported Sensors LEL Sensor Range Resolution Note Catalytic-bead LEL 0 to 100% LEL 1% LEL HON manufactured 55 CFs LEL Sensor Filters Filtering capacity Note H2S filter 10ppm H2S, 720 min Standard version H2S + Si filter 10ppm H2S, 240 min 10ppm HMDS, 40min Option: Cannot be used in environments hydrocarbon-chain compounds C≥6 EC Sensors Range Resolution Note O2 Liq Electrolyte1 0 to 30% Vol 0.1 % Vol HON manufactured CO1 0 to 1,000 ppm 0 – 250 ppm / 1 ppm 251 – 1,000 ppm / 3 ppm Proven ToxiRAE3 HCN 0 to 50 ppm 0.2 ppm Cannot be used with H2S sensor H2S1 0 to 100 ppm 0 – 50 ppm / 0.1ppm 51– 100 ppm / 1ppm Certain chemicals inhibit or poison the catalytic bead in LEL (combustible) sensors, leading to partial or complete loss of sensitivity. Poisoning is defined as a permanent degradation, while inhibition is usually recoverable by exposure to clean air. 1Sensor Calibration time around 30s

Battery RunTime & Charging Solutions Configuration Spec* -40°C -20°C -10°C 20°C 50°C BLE 15h 2 - 3h 12 - 14h 13 - 14h 15 - 16h Wi-Fi + GPS 11h 11 - 13h Mesh + GPS 2 - 5h 11 -13h 11 - 14h * Specifications are given @ room temperature / brand new battery Charging Options (Charging time <4h): Travel charger (Standard accessory) Cradle charger Gang charger Truck Mount

All accessories are in the box “What is in the box?” Travel Charger International plug AC adapter Communication Cable Everything a customer may need to operate, charge, configure and upgrade the monitor, and download datalogs to PC No additional charges for software, datalogging, PC communications capability, charging solution, or calibration adapter Calibration Adapter Product CD All accessories are in the box

“Up sale” / Protect Revenue-Margin / Differentiator Optional Accessories Wrist wrap Multiple charging options Auxiliary Filter Hand pump kit CSK 1 / CSK 2 (QRAEII / QRAE3 ) AutoRAE 2 Automatic Test and Calibration System Refer to backup slides section for full details “Up sale” / Protect Revenue-Margin / Differentiator

Bypassing is recorded as a policy violation Policy Enforcement Must Bump/Must Cal. features Prevent instrument use if monitor is not calibrated/bump tested to policy Configurable: enable/disable: select whether a user can bypass the requirement “All sensors tested and calibrated” tick mark on UI Quick visual verification of compliance with bump/calibration policies IntelliFlash™ behavior A flashing green light — visible from a distance — that indicates the detector has been bump tested and is monitoring correctly. So you can have peace of mind that workers’ detectors are compliant with government regulation and company policy. Bypassing is recorded as a policy violation

Glance Mode Want to quickly identify product configuration? Simply press “Y” button to see product configuration. Product FW version Product sensors configuration Sensors Bump test and Calibration information Wireless (Wi-Fi, Mesh, BLE) and GPS module status

Man Down Alarm A critical safety feature of every RAE product The instrument tracks the time during which it is not moving based on the readings of its motion sensor If the instrument is motionless when it is not supposed to be, something may be wrong with its user Can be enabled or disabled Highly configurable (adjustable sensitivity, timing, etc.) The Man Down Alarm is not only shown locally on the instrument, but also remotely, over the Wireless Network

Ecosystem Honeywell is constantly evolving and improving to help create safer, smarter workplaces all over the world. With our best-in-class brands, RAE Systems and BW Technologies, we have developed Honeywell ConneXt Safety Solutions—the most intelligent, real-time wireless gas detection in the market today. Honeywell ConneXt Safety Solutions is designed to provide 3 main value to our customers: Proactive safety and risk reduction Increased productivity and performance Enhanced health and environmental protection

MicroRAE - Qualification Questions 1 – How do you manage real time gas detection readings in high risk area? 2 – Do you have colleagues/ partners that operate in remote locations outside the site? Would you see value in receiving also real time data from their gas monitor? 3 – How do you make sure your current solution is properly calibrated / bump tested according to local regulation and/or company policy? 4 – Is worker location important alongside real time gas detection? 5 – How do you handle lone worker applications? 6 – How long does it take for your current gas monitor to be calibrated?