Luebeck, June 2011 Katrin Mett Image H 9.4 cm x W 9.16 cm Image H 9.4 cm x W 18.36 cm Transport and Mounting possibilities Babylog VN500 Luebeck, June 2011 Katrin Mett

Mobile and integrated Provide a high level of ventilation therapy during intra hospital transport – that’s mobility provided by the VN500/V500 Promote faster and safer transport with these easy to use transport components Gas Supply Unit (GS500) Power Supply Unit (PS500) Transport Supply Unit (TSU) Achieve safer transport using reliable solutions Simultaneous independence from gas and power Uninterrupted high-quality respiratory care Easy to set-up Webinar Mounting V500/VN500

Ready for back-up and transport Infinity® C500 Ventilator V500 / VN500 GS500 PS500 Transport Supply Unit Webinar Mounting V500/VN500

PS500 Power Supply Unit – Technical Data PS500 consists of 4 Maintenance Free Valve Regulated Lead Acid Batteries Weight 27 kg Width x Height x Length (290 x 163 x 370) mm Capacity 30 Ah Voltage 24 Volts Charging Time average 11 hours Webinar Mounting V500/VN500

PS500 Power Supply Unit – Battery Life PS500 without GS500 240 minutes (full charge/new battery) PS500 with GS500* Approximately 120 minutes Webinar Mounting V500/VN500

PS500 Power Supply Unit – Service Interval Every 90 days Battery check Every 12 months Physical check Every two years Replacement of batteries Webinar Mounting V500/VN500

PS500 Power Supply Unit - Cord Management One power cord from the V500 or VN500 ventilator is connected to the electrical socket A side channel is utilized to bring power to the external battery. This side channel prevents the need for multiple cords into the hospital electrical system. Webinar Mounting V500/VN500

PS500 User Interface Screen The battery icon on left indicates battery strength and PS500 available for use. Webinar Mounting V500/VN500

PS500 User Interface Notification A high priority alarm will be activated upon PS500 being activated for interruption in standard electrical supply. This alarm can be silenced – visual alarm to become blue thereafter indicating external battery is in use. Webinar Mounting V500/VN500

No user interface interaction necessary, completely automatic GS500 Gas Supply Unit No user interface interaction necessary, completely automatic Can be used for continuous operation or back-up* For transport use only with PS500 Rotation speed adapts to current breathing mode and patient type Low energy consumption, Less bulky Reduced noise compared to compressors * GS500 does not work @ VN500 in HFO Webinar Mounting V500/VN500

GS500 Gas Supply Unit - Supply Gas Management A second supply channel incorporated into the backbone of the trolley is used for the GS500. Webinar Mounting V500/VN500

GS500 and PS500 Operating instructions Ready for transport start GS500 via Transport-Button in dialog Special Procedures or simply remove gas hoses from central gas supply PS500 will start when disconnecting the main power source Back-up gas and power provided automatically Webinar Mounting V500/VN500

Benefits Workstation CC and NC with PS500 and GS500 No user interface interaction necessary, completely automatic Can be used for continuous operation or back-up* For transport use only with PS500 Rotation speed adapts to current breathing mode and patient type Low energy consumption, less bulky Reduced noise level compared to compressors * GS500 does not work @ VN500 in HFO Webinar Mounting V500/VN500

Gas Supply TSU - Transport Supply Unit Hand cart for two gas cylinder for use with VN500, V500, EvitaXL und Savina 300 Maximum height of the compressed gas cylinders including valves 790 mm Minimum diameter of the compressed gas cylinders 80 mm Maximum diameter of the compressed gas cylinders 160 mm w/o bed coupling 140 mm with bed coupling Maximum load 23 kg Webinar Mounting V500/VN500

Gas Supply Cylinder holder Can be used with Evita Infinity V500 Babylog V500 Evita XL with new trolley Savina 300 Webinar Mounting V500/VN500

Bed coupling Designed for beds, incubators and warming beds For use with VN500, V500, EvitaXL and Savina 300 Swivel possibility to uneven pavements Can be mounted at the trolley Webinar Mounting V500/VN500

Bed coupling Rail clamp for bed Fits horizontal rails, bed poles, incubators and warming beds. Can be ordered separately to stay with the bed Webinar Mounting V500/VN500

Mova Cart 2.0 Solution Lift or docking version available Adaptition of Evita XL and Evita 4 Adaptation of Evita V500 or Babylog VN500 via an additional fixation plate New integrated rounded corners New ergonomic handle position Improved cable management Self closing drawer improve the comfort Use as dock or lift variant for ceiling pendant Webinar Mounting V500/VN500

Mounting front rail M26 arm for front rail use Assembly at front rail with bracket of V/VN Supporting frame or supporting frame with bail Webinar Mounting V500/VN500

Mounting console M26 arm with different rear adapters and front adapters Console, ventilator not fixated Webinar Mounting V500/VN500

Mounting 38mm pole M26 arm for 38mm pole use Assembly plate with 2 adapter Supporting frame or supporting frame with bail Webinar Mounting V500/VN500

Accessories for our Mounting System M26 VESA standard interface 75x75mm (all VESA arm variants Standard norm rail: height 25mm, depth 10mm, length 300mm; Description Technical data: dimension (HxDXL) 90mm x 40mm x 300mm; maximum load 10kg; weight 1,8kg Adapter for V500/VN500 Cockpits and other accessories, which are mountable on a standard rail Order No° G24627 Additional information in SalesView: https://www.medical.draeger.com/livelink/livelink.exe?func=ll&objId=34814261&objAction=browse Webinar Mounting V500/VN500

Thank you for your attention.