MKTG 2016

Harsh environments Solutions manufactured from mild steel or aluminium alloy Single or double wall Modular cabinets Monobloc and compact enclosures Wall-mounting boxes Terminal boxes Monobloc control desks Suspension arm system Cabinet OUTDOOR STAINLESS STEEL EMC

Solutions for outdoor applications E VIS

E VIS solutions for outdoor applications Perfect protection of the internal components by environmental factors, extreme temperatures, direct sunlight, harsh environments, vandalism and atmospherical, chemical and mechanical agents. Natural ventilation Thermal management Special insulation on request Technical support for the choice of the most proper ventilation/conditioning unit

Wide range Monobloc structure manufactured from mild steel, aluminium alloy or stainless steel (on request). Special manufacturing concept (single or double-wall) Silicone gasket Special paint finish Mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments / Aluminium alloy version: Special painting processwith a single polyester powder coating with zinc base (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth).

Manufacturing concept Single wall Double wall

Technical close-up Thanks to a new design, the side covers are assembled and secured without any screw. Double-walled frontal door + louvers on the roof + natural ventilation for an easier thermal management of the enclosure

Technical close-up Only 3 screws are needed to assemble the hinged roof to the monobloc structure. No point of access from outside when the door is closed. Locking system with key. Big cable entry and fast assembly of the plinth frontal crosspiece for easy wiring

Stainless steel solutions

Specific material and finishing for each application OUTDOOR INDOOR Off-shore Food processing Pharma Industrial Harsh environment Washing / High T Dust Mild steel Stainless steel AISI316L Stainless steel AISI304L Double layer of special powder coating for mild steel: epoxy-polyester resin primer and second polyester layer with anticorrosion pigments (RAL7035 smooth for the cabinet, Pantone 2717U smooth for roof and plinth)

Solutions in AISI304L or AISI316L complying with EN 12944, Our plus Solutions in AISI304L or AISI316L complying with EN 12944, for specific environments C3 (urban and industrial), C4 and C5 (industrial and marine), or for potentially explosive atmospheres.

Specific manufacturing concepts SILICON SEAL Resistant to most detergents, hot water jets and easy to clean. Optimal environment conditions for use: - 50° < T < + 200 C° DOORS WITH FORMED CORNERS Pre-satin AISI304L / AISI316L stainless steel AISI316L STAINLESS STEEL COMPONENTS Hinges and screws in contact with external environments are manufactured from stainless steel. Orthogonal joints laser-welded to E NUX cabinet structure PRE-SATIN MATERIAL PVC protective layer and special packaging

Electrical enclosures ATEX E NUX E COR

Certification and classification Evaluation of ETA technical book Conformity of the technical book 3) Certification by TUV 1) System certification of the processes related to AtEx products, complying with ISO 80079-34 2) CE test 3) CE certification for empty enclosures (certificate IMQ10 atex 037 U)

Stainless steel suite cabinets E NUX

Technical features E NUX manufacturing concepts Available in AISI304L and AISI316L Orthogonal joints manufactured from AISI316L stainless steel and laser welded to the structure EUPA mounting plate, EUFX side panels, EUZX modular plinth and standard E NUX accessories Protection rating: IP55, Nema 12, IK10 On request: cabinet with single blank door, in stand-alone or joined in a suite with IP>55 or Nema 4X

Further dimensions available on request Wide range Standard dimensions available with: single blank door(12 dimensions) double blank door (4 dimensions) plexi door (12 dimensions) Further dimensions available on request

Accessories Plexi door EUFX side panels EUZX modular plinth or with integrated corners 180° hinges Shared with E NUX mild steel: EUPA front inserted mounting plate EUPL side inserted mounting plate WE inserts for locking system Inner accessories

Stainless steel monobloc cabinets E MOX

E MOX monobloc cabinets Monobloc cabinet supplied with front inserted mouting plate Offered in 12 standard dimensions with single door and 3 with double door Completely compatible with ETA standard accessories, thanks to the optional inner uprights Manufactured from AISI304L or AISI316L stainless steel Protection rating: IP66 (single door), IP55 (double door) - Nema 12 - IK10.

Accessories EUPA mounting plate EUPR partial mounting plate WE locking systems EUZX plinth with integrated corners EUMI inner uprights to guarantee compatibility with ETA accessories

Stainless steel compact enclosures E COMP

E COMP compact enclosures For free-standing and wall-mounting applications Offered in 12 standard dimensions Completely compatible with ETA standard accessories Manufactured from AISI304L or AISI316L stainless steel Protection rating: IP55 - Nema 12 - IK10.

Accessories E MOX lifting eyebolts E COR wall-mounting brackets WE locking systems EUZX plinth with integrated corners

Stainless steel wall-mounting boxes E COR

E COR stainless steel wall-mounting boxes Completely welded enclosure body without cable entry and supplied with mounting plate provided with slots in the corners. Door with formed corners and silicone seal, with a reduced dimension of the door angle, in order to permit the door opening in case of E COR boxes placed side by side. Wide range of accessories (wall-mounting brackets, inner door, modular chassis, DIN profiles, rain canopy, hygienic design locking system and plinth to be ordered separately). Protection rating: IP66, Nema 4X (single door) - Nema 12 (double door or plexi door), IK10.

Wide range 27 standard dimensions with blank door (single or double) + 7 standard dimensions with plexi door.

ST-EEX and ECOR-EEX electrical enclosures Enclosure without cable entry, provided with: door with polyurethane gasket, mounting plate, locking system with zinc body and stainless steel lever, & welded external stud. 25 standard dimensions available with single blank door. Protection rating: IP66, Nema 4 (ST) e Nema 4X (ECOR), IK10 Ex II 2G Ex e IIC Gb Ex II 2GD Ex tb IIIC Db

ECOR-TX solutions with sloped roof E COR manufacturing concept Completely welded body with cable entry and mounting plate Sloped roof, specifically designed for applications in Food industry 7 standard dimensions available with blank door Protection rating: IP66, Nema 4X, IK10.

Accessories Outdoor application: Rain canopy provided with ventilation louvers Easy installation of the components: frame for DIN guides and panels, inner door Cable glands for food, outdoor or harsh environments Hygienic design for food or harsh environments : locking system with special gasket

Stainless steel terminal boxes, push-button boxes and control desks E GRAN SHX ZBX / AEX / MEX / LEX / PEX

Innovative locking system with ¼ turn self-captive screws E GRAN terminal boxes Boxes supplied with screwed cover provided with formed corners and silicone gasket 6 standard dimensions Protection rating: IP66, Nema 4X, IK10 Innovative locking system with ¼ turn self-captive screws

Innovative locking system with ¼ turn self-captive screws E GRAN terminal boxes Boxes supplied with screwed cover provided with formed corners and silicone gasket 6 standard dimensions Protection rating: IP66, Nema 4X, IK10 Innovative locking system with ¼ turn self-captive screws

SHX push-button boxes Push-button boxes supplied with blank or punched cover (for buttons ø 22,5mm), screwed to the body and supplied with formed corners and silicone corners. 4 standard dimensions with blank cover 6 standard dimensions with punched cover Protection rating: IP66/IP69K, Nema 4X, IK10

Monobloc and modular control desks ZBX = 4 standard dimensions D=400mm AEX = 4 standard dimensions D=400 mm Protection rating: IP55, Nema12.

Stainless steel suspension arm system E RAM

E RAM suspension arm system Housing manufactured from AISI304L and suspension arm system for industrial applications: 4 standard dimensions for the housing, supplied with door with silicone seal 4 versions of suspension arm (I – L - J – S) Wide range of different joints (fixed/rotating) to be easily assembled by the user Protection rating (approval pending): IP66/IP69K, Nema 4X, IK10 for housing

Solutions for EMC applications E NUX ST SD

EMC tested solutions The EC Directive on electromagnetic compatibility applies to equipment and units that can generate/ receive electromagnetic waves and liable to cause interferences, altering the correct functioning of electronic equipment installed in the cabinets. ETA EMC cabinets and boxes – galvanized on both sides and painted only externally – go beyond the dispositions of the Directive, but they can act as a barrier of the electromagnetic waves which propagate from the internal and external source and have been tested @ NEMKO SPA.