How to wire Ethernet Cables

Slides:

Advertisements

Similar presentations

Week 7 Session 1 Reading 3 Pin Configurations and Wiring Terminology.

Advertisements

Making connections with Cat5 Way cool!

How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.

Ethernet Cable Local Area Networks, 2009 Spring. Outline Introduction Ethernet Cable Category How to wire Straight through Crossover Reference 2 Ethernet.

How to Make a Straight-through Cable

CRIMPING Introduction

Crimping Get the pinouts for the desired connector and application. 2.Identify the proper connector and the associated pins for your application.

IST IT Services Intern Program Quiz Lessons Summary Links Home How to Make Network Cables In this lesson you will: –Determine what length cable is needed.

HOW TO MAKE UTP CAT-5/5e CABLE

Building a T568B Network Cable Examples of good and bad cables Identification of components Critical areas of cable.

+ Straight-Through Cable Construction Lab 4. + Data Transmission In data transmission system, the transmission medium is the physical path between transmitter.

Page 1 - © Richard L. Goldman Networking Topology ©Richard L. Goldman January 8, 2002.

Connections. SERIAL DATA Serial Terminals Serial connections Telecommunication History 101  RS-232 DTE – Data Terminal Equipment  Teletype  Computer.

Hands On: Cutting and Connectorizing UTP Chapter 3a Panko’s Business Data Networks and Telecommunications, 6 th edition Copyright 2007 Prentice-Hall May.

Wiring MVRT 2010 – 2011 Season. Table of Contents Wire stripping Crimping Soldering.

How to Identify an RJ-45 Cable To identify the RJ-45 cable type, hold the two ends of the cable next to one another so you can see the colored wires inside.

The making of Ethernet Standards For the Ethernet Cabling & PoE (power-over-Ethernet).

BASIC TELECOMMUNICATIONS

Crafting a Cat5e Cable Scott H. Bowers. Materials Raw Cat5e cable ~50 feet. Wire Cutter/Cable Stripper RJ-45 Crimper Ethernet tester RJ-45 terminators.

How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.

NETWORK CABLING Chapter 2

Network Devices.

INT-100. A crimping tool is a tool designed to crimp or connect a connector to the end of a cable. For example, network cables and phone cables are.

Crossover Cable Construction

Copper Media Describe the specifications and performances of different types of cable. Describe coaxial cable and its advantages and disadvantages over.

PREPAIR BY :  MOHD SHARIFUDDIN B SAHABUDIN  12DEP11F11006  IMAN BT ABDULLAH  12DEP11F1002  MUHAMMAD MUIZZUDDIN BIN ZAINOL ABIDIN  12DEP11F1003 

سليمان صلاح أبوطير عمر جهاد الحايك محمد كمال المدهون رشدي أديب حميد محمد نهيل العثماني محمد أسعد أبوالكاس فاطمة طاهر لولو فاطمة طاهر لولو.

Module 3: Networking Media Safe Handling and User of a Multimeter Voltage Measurement Resistance Measurement Series Circuits 3.1.9a.

Cabling Project. Your first responsibility, as the network designer, will be to have your client specify, in writing, the desired outcome of the project.

CANBus Hardware Setup. CANBus CANBus is a control system method that can be used instead of the conventional PWM system. It uses RJ12 cable, which is.

Making and Testing Cat 5 Cables. EIA/TIA-568A and 568B Straight Through and Crossover Cables EIA/TIA-568 Commercial Building Telecommunications Wiring.

Section 9: Implementing the Network CSIS 479R Fall 1999 “Network +” George D. Hickman, CNI, CNE.

Chapter Three The Highways and Byways of the Network.

Project On Ethernet Cable Building & Video Recording James Maclean & Stephen Craig.

Ethernet Cable. Straight Through Connection  I went ahead with the Straight through connect for my first few cables, using the T-568A wiring standard.

Page 1 - © Richard L. Goldman RJ-45 Termination ©Richard L. Goldman June17, 2002.

1 Discovery 2, Ch 4 Notes. 222 Cabling Standards Standards ensure that networks perform to expectations US—IEEE & ANSI/TIA/EIA Canada—CSA (Canadian Standards.

Network Anatomy By: Roland J. Boutte. Ethernet Cable cable used to connect computing devices together directly. two hosts or two switches to each other.

Day 5 Wires. Why wire? Conducts Electricity and directs it to a location. Cheap! Easy to run.

Chapter 2.  Upon completion of this chapter, you should be able to:  Select & install cables for connecting to a dial-up network  Select & install.

Cross-Over Cable Steps to a successfully terminated end!

EeePC – Ubuntu Running pvMon USB cable Phidget I/O Controller Photovoltaic panel Power/System Connections I V PV charger Cont. Phidget I/O Controller +12.

How to Make an Ethernet CAT5 RJ45 Crossover Cable

Chapter 5a. 5a-2 Single Twisted Pair Jacket Four pairs (each pair is twisted) are enclosed in a jacket. Copyright 2011 Pearson Education, Inc. Publishing.

Network Tools and Cabling. Network Tools RJ means "Registered Jack" This is a plastic connector that looks like a large telephone-style connector. Used.

How to Create RJ – 45 Wire.   To create the RJ – 45 cable or better known as the Cat wire it is very simple all you need to do is follow my simple instructions.

Creating an Ethernet Cable By Daniel Baxter. Step 1: Gathering the Materials When I started the class in August one the first things I did was order the.

Skip 6 positions from the high end. Locate Pin #1 Crimp the cable with one end extending 9 1/2” to the left and 4” to the right. Separate the wires in.

Wildland Fire Information and Technology Making and Testing Cat 5 Cables.

David Rodriguez.  Use protective glasses  Be careful of sharp tools  Have first aid-kit near by  Familiarize yourself with surroundings.

T. Hajer Brahim & T. Rania Alakazalah U.Y: 1435/1436 H.

UTP cabeling. Introduction This document shows how to properly construct a Crossover network cable. This cable can be used to directly connect two computers.

Lecture 2 unit 1.

© ExplorNet’s Centers for Quality Teaching and Learning 1 Use appropriate tools for network cabling and connections. Objective – 2%

How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.

ETHERNET CABLE TYLER THORNBURG LTEC STRIPPING AND CUTTING First you will need to strip the wire. I used scissors to cut off the rubber around.

Constructing/Testing 4-Pair Cabling Systems

Lab#1 UTP cables.

CREATING A 568A, 568B, OR CROSSOVER CABLE Creator:Dennis Groseclose

Hands On: Cutting and Connectorizing UTP

SKYLINE SKYLINE HAS CHANGED THE WAY THE POLEBOX CARD SHOULD BE WIRED AND ALL FUTURE NEW INSTALLS WILL BE DONE THIS WAY. IF YOU GO TO A SITE TO WORK ON.

Hands On: Cutting and Connectorizing UTP

Lab#1 UTP cables.

Ethernet Cable Local Area Networks.

Lecture 3 LAN Transmission Media

Fundamentals of Computer Networks

Hands On: Cutting and Connectorizing UTP

LAN Cabling CCNA Instructor Training Course October 12-17, 2009

LESSON NO:11 Network Cabling Making connections with Cat5 Way cool! SMI-Lecturar Samreen Javed.

Presentation transcript:

How to wire Ethernet Cables

Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable if necessary Cable Tester

What is an Ethernet cable? Inside the cable, there are 8 color coded wires. Wires are twisted into 4 pairs of wires, each pair has a common color theme. One wire in the pair being a solid or primarily solid colored wire and the other being a primarily white wire with a colored stripe.

Internal Cable Structure and Color Coding Orange / Orange-white Green / Green-white Blue / Blue-white Brown / Brown-white

About the RJ45 Ends: The RJ45 end is a 8-position modular connector RJ45 Jack and Plug Pinout

Ethernet Cable Pin outs: A straight through cable used to connect to a hub or switch, and A cross over cable used to operate in a peer-to-peer fashion without a hub/switch.

Standard, Straight-Through Wiring (both ends are the same): RJ45 Pin # Wire Color Wire Diagram 10Base-T Signal 100Base-TX Signal 1000Base-T Signal 1 White/Green Transmit+ BI_DA+ 2 Green Transmit- BI_DA- 3 White/Orange Receive+ BI_DB+ 4 Blue Unused BI_DC+ 5 White/Blue BI_DC- 6 Orange Receive- BI_DB- 7 White/Brown BI_DD+ 8 Brown BI_DD-

Cross Over Cable 1 White/Orange White/Green 2 Orange Green 3 4 Blue RJ45 Pin #(End 1) Wire Color Wire Diagram RJ45 Pin# (End 2) 1 White/Orange White/Green 2 Orange Green 3 4 Blue White/Brown 5 White/Blue Brown 6 7 8

How to wire Ethernet Cables: Strip off about 2 inches of the cable sheath. Untwist the pairs - don't untwist them beyond what you have exposed Align the colored wires according to the diagrams above. Trim all the wires to the same length, about 1/2" to 3/4" left exposed from the sheath.

How to wire Ethernet Cables: Insert the wires into the RJ45 end - make sure each wire is fully inserted to the front of the RJ45 end and in the correct order. Verify the wires ended up the right order and that the wires extend to the front of the RJ45 end and make good contact with the metal contacts in the RJ45 end. Crimp the RJ45 end with the crimper tool

How to wire Ethernet Cables: Cut the cable to length - make sure it is more than long enough for your needs Repeat the above steps for the second RJ45 end. Use a cable tester to verify the proper connectivity of the cable.

Source from: http://www.ertyu.org/steven_nikkel/ethernetcables.html ~ END ~ Source from: http://www.ertyu.org/steven_nikkel/ethernetcables.html