IP-based 8-port Switched Power Manager IPM-8220 1

Presentation Outlines Product Positioning Product Overview Product Features Product Applications Product Comparison

Product Positioning 3

Product Positioning PLANET IP Power Management Family IP Metered New IPM-16120 - Zero U Hot-swap IP module SNMP, email, IP filter, statistic On-going Planning New Phase-in IP Metered IPM-4220 - Desktop - Sensor, UPS SNMP, email, IP filter, statistic New IPM-8220 - 1U - Sensor, UPS - SNMP, email, IP filter, statistic New Switched IPM-ESB - Accessories - Temperature - Humidity New 4-Port 8-Port 12-Port 16-Port 4

Product Overview 5

Product Overview IPM-8220 Front View IEC C13 to C14 power cord for IEC outlet Power & Alarm LED 8 IEC Power Outlets LCD Panel (Current, Voltage & IP) Switch/Set Button (Manual power control)

Product Overview IPM-8220 Rear View 10/100Mbps Ethernet Port Breaker Reset Button Power Inlet Temperature & Humidity Sensor COM Port for API, UPS & Console

Product Features 8

Product Features Hardware 1U rack-mount design; IEC outlet model 8 power outlets that support real-time image monitoring 8 LEDs show power status for each power outlet LCD panel displays current, alarm current, voltage and network information Buzzer will ring when total power consumption value exceeds set value Circuit breaker avoids damage caused by overload Versatile sensors supported through environmental sensor box (ESB) inputs Switch/Set button is set to lock-up protection to avoid modification

Product Features – LCD Display Electric Current Monitored on Display The local digital display helps installers avoid overloaded circuits by providing a visible warning. 10

Product Features – ESB Environmental Sensor Box (ESB) You may add temperature and humidity sensors to control the power switch by monitoring the environmental changes. 11

Product Features Power Distribution Remote Access Maximum Amps/Inlet: IEC 16A for 1 inlet Maximum Amps for 8 Outlets: IEC 16A for 8 outlets Full Frequency Range: 50~60Hz Supports multiple power control methods – Wake on LAN, System After AC Back, Kill the Power Remote Access Remote power control via TCP/IP and a built-in 10/100Mbps Ethernet port Multi browsers support (IE, Google, Firefox, Safari, Opera, Netscape)

Product Features – Remote Management Remote Management Capabilities Full-featured network management interfaces of the Switched IPM provide standards-based management via Web, SNMP and Telnet, or by setting the button . 13

Product Features Management Provides Install Wizard to ease users' setting of parameters Events notification by sending pop-up message, trap, SMS or e-mail Supports Management Information Base (MIB) files for SNMP Naming support for outlets Power-on sequencing intelligently turns on/off devices based on event occurrence or planned schedule Voltage, current, wattage and total kWh report Sets over-current watchdog for each power outlet External UPS can be installed for a possible power outage

Product Features – Scheduled Power Control Scheduled Power On/Off The IP-based Switched Power Manager allows you to pre-define a power schedule for IT equipment. 15

Product Features – Overload Protection The Switched IPM features a built-in 16-amp circuit breaker that can safely reset switch to prevent dangerous circuit overloads from damaging equipment to ensure dependable performance of vital equipment. 16

Product Features – Statistic Energy and Cost Saving You can also check the current energy consumption in your office within the configuration interface of the Switched IPM. 17

Product Features Security Web page supports 1024-bit SSL security encryption transmission Supports Secure Socket Layer V3 and Secure Shell V1 protocols Administrator and multiple users with password protection for double-layer security IP Filtering -- Address-specific IP security masks to prevent unauthorized access

Product Applications 19

IP Power Management Application PLANET Switched IP Power Manager consolidates power control, current monitoring, temperature and humidity monitoring with environmental sensor box (ESB), web page management, message, e-mail, and SNMP functions together to enable MIS staff to be informed and thereby to remotely deal with the relevant problems through Internet. 20 20

Product Comparison -- External Model Features IPM-8220 ATEN PE8108 Power Outlet 8 Rating 100–240V~; 50/60Hz; 16A 100–240V~; 50/60Hz; 15A Sensor Support ■ Wake on LAN - Firewall IP, MAC filter SMS Email Notification Overload Protection Chart Statistics

PLANET IPM Product Comparison Model Features IPM-4220 IPM-8220 IPM-16120 Hardware Type Switched (ON/OFF) IP Metered (Always ON) Rack Mounting Desktop 1U Zero U Power Outlet 4 8 16 Rating 100–240V; 50/60Hz; 16A LCD Display Current, IP Voltage, Current, IP Current, Device Temperature, IP External UPS ■ - External Sensor

PLANET IPM Product Comparison Model Features IPM-4220 IPM-8220 IPM-16120 Management Management Interface Web, SNMP, Telnet, console Web, SNMP, Telnet Firewall IP, MAC filter Schedule Power Control ■ - Wake On LAN Email Notification Overload Protection Chart Statistics

Appendix - Sales Target Target Markets System Integrators Resellers Profitable Products The following are potential to all customers: IP Power Manager KVM PoE Switch IP PBX

Appendix Related Products Model Name Description IPM-4220 IP-based 4-port Switched Power Manager IPM-8220 IP-based 8-port Switched Power Manager IPM-16120 IP-based 16-port Metered Power Distribution Unit IPM-ESB Environmental Sensor Box

Appendix Outlet Port Current Range IPM Type IP Power Manager Naming Rule IPM-16120 Outlet Port IPM Type Current Range Outlet Port 04: 4-Port 08: 8-Port 12: 12-Port 16: 16-Port Current Range 0: Non-A 1: 10A~15A 2: 16A~20A 3: 30A~35A IPM Type 1: IP Metered PDU 2: Switched PDU