Example of using solar pumping design software: COMPASS

Presentation Screen when opening COMPASS: Click on either Submersible or Surface depending on the kind of scheme Useful webinars introducing COMPASS

Example for Submersible pump Select your location by introducing Country and City OR GPS point Leave the system to suggest the best performing angles for solar panel installation Motor cable length =Typically pump installation depth+20 meters. Make your best guess in case you don’t know yet pump depth, as Motor cable length has little influence Lost due to panels being covered with dust. If in dusty environment with little possibility to clean panels regularly, dirt lost=10%. Otherwise leave it at 5%. Only relevant if you are pumping hot water, as it wont refrigerate the pump properly. Otherwise, leave it at 25C If you don’t know Total Dynamic Head of your system, tick on Pipe Length and fill the information to the best of your knowledge (see next slide) State daily needs of water in terms of m3 If you have made a pumping test, introduce here the Safe Yield of the borehole (the maximum amount of water that can be pumped without drying the borehole). If want to ensure the Required Daily Output of water is supplied even during months with least Sun (i.e. winter or rainy seasons) choose the option ‘Sizing for month with least output’. Otherwise choose ‘Average month’

In case Total Dynamic Head is not known, tick on Pipe length and fill the 3 boxes to the best of your knowledge. Vertical height from the dynamic water level to the highest point of delivery (not to be mistaken with static water level). Length of pipe from pump outlet to pump to inlet of tank. To fill Pipe Type, click on ‘+’, then choose from the displayed ‘Pipe type Menu’ the closest definition to your pipe. In case of doubt, choose the worst case scenario (‘steel, slightly rusty and incrusted’ with Pipe roughness of 0.400).

Click ‘Calculate’ and see whther your water needs are covered. 62m3/day during December, which is the month with least output for our location. As it is higher than the Daily Required Output introduced (60m3/day), it means this system will provide all the water needed all the year round. Only relevant if you are pumping hot water, as it wont refrigerate the pump properly. Otherwise, leave it at 25C Daily water pumped in m3 during April Daily water pumped in an average day during the year Only relevant if you are pumping hot water, as it wont refrigerate the pump properly. Otherwise, leave it at 25C This is an example of m3 pumped per hour in an average day. Pump will start running at 9:00h and will pump 8.1m3/h through 15:00h for 6.8m3/h

Add/ remove solar panels and see how water output change By clicking the arrows up/down, number of solar panels can be increased/ decreased and water output will change accordingly By clicking report, system characteristics will be shown (pump, number of panels, etc)

By Clicking Report, all data of proposed system will be shown 5 pages showing different system data and drawings Add/remove accessories (water level sensors, water meters etc) and produce report in .pdf if needed

Additional resources COMPASS video tutorials: https://www.lorentz.de/en/partnernet/partner_program/partneraca demy/webinar-recordings.html Tender template for solar pumping tenders: https://www.lorentz.de/en/partnernet/selling/tender.html pumpScanner remote monitoring App for Android: https://www.lorentz.de/en/partnernet/support/pumpscanner.html Knowledge Base for tricks and tips about solar pumping: https://www.lorentz.de/en/partnernet/support/knowledge_base.ht ml