Creo Schematics Installation How to install and configure for KNA

Run setup.exe Run setup.exe in subfolder in this location: \\akus2406\eng\ENGINEERING-APPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS - RSDESIGNER

Install Creo Schematics

Post install steps Set the install folder permissions to allow configuration files to be copied. Navigate to C:\Program Files (x86) Right click on the PTC folder and select Properties On the Security tab all Full Control for Users

Configuration Run “akus2406\eng\ENGINEERING- APPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS – RSDESIGNER\KNA Configure Creo Schematics.bat – Shortcut” Installation and Configuration is complete! Now the Windchill Workgroup Manager (WGM) should be installed

ADMIN INFO set Config="V:\ENGINEERING- APPLICATIONS\ENGL_ENG_Standards\Pro_Stds_WF\configs\CreoSchematics" set Install="C:\Program Files (x86)\PTC\Creo 2.0\Schematics\bin" set SchemAppData="%Appdata%\Roaming\PTC\Creo\Schematics INSTALLER: V:\ENGINEERING- APPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS – RSDESIGNER Configure license selection of FULL vs. LITE Copy PSF files From V:\ENGINEERING-APPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS - RSDESIGNER\KNA Configuration to C:\Program Files (x86)\PTC\Creo 2.0\Schematics\bin Customization When Creo Schematics starts, customization settings are automatically applied from <drive>:\Users\<username>\AppData\Roaming\PTC\Creo\Schematics or the working directory to various aspects of the user interface. The files in the working directory follow: • creo_schematics_user_customization.ui • creo_schematics_defaults.bin • creo_schematics_shortcuts.dat • creo_schematics_config.dat • creo_schematics_mapkey.dat

Creo Schematics Central Catalog The full version Creo Schematics can link designs to a central catalog that provides a centralized location and a single source for company libraries. (Creo Schematics Lite cannot do this.) Place the catalog on a server with read-only access to prevent unauthorized modification. Assigned privileges protect the central catalog: • Administrator—Controls and maintains the central catalog. • Editor—Enables the editing of the central catalog. • User—Creates designs using the central catalog. With user privileges, you cannot edit the central catalog. You can submit new catalog items to the administrator for approval and integration into the company catalog. A base design using company templates, properties, and general design settings must be accessible for all users. If the base design is password- protected, you cannot propose new catalog items for approval by the administrator. Protecting the Base Design from Unauthorized Modification Within the Creo Schematics installation, the system administrator can run a command-line program to password-protect the base design. 1. Open a command window and browse to the folder where password.exe is typically located: <creoschematics_loadpoint>\i486_nt\creoschematics\bin 4 Creo Schematics 2.0 2. Enter password set <path to design—including the design folder> <password>. In the following example, Creo Schematics is installed at <creoschematics_loadpoint>. The design that requires password protection is at <design_location>Project1. The password that is set to the base design (Project1) is Creo. a. Open a command window and browse to the bin directory: <creoschematics_loadpoint>\i486_nt\creoschematics\bin b. At the prompt, type the following command: password set <design_location>\Project1 Creo A system message confirms that the password has been set to Creo. 3. To unlock a design, open it in Creo Schematics. Click Admin > Unlock catalog and enter the password.