What is MOTORcheckUP in brief MOTORcheckUP is a look inside the engine without taking it to pieces. Like a doctor examining a patient by analysing just one drop of blood, our test system needs only one drop of motor oil to detect whether the engine is healthy or something is wrong. Therefore, we call our test system:   MOTORcheckUP - the health check for your engine. You get both with MOTORcheckUP. We leave nothing to chance. The system as well as the current production are put to the acid test: To this end, the leading institute of experts in Germany (TÜV SÜD) was instructed to evaluate the product, check the functionality of the product and monitor permanent good quality during production. This is done for your benefit: you can never be too sure.

What are the products performances MOTORcheckUP is a health check for your engine With MOTORcheckUP, you can check your engine for the following: Grime, sediment in the oil Oil condition itself Water (condensation or coolant) in the oil Fuel in the oil The most expensive part of a vehicle is the engine. With MOTORcheckUP, you can detect whether the engine is “healthy” or whether a fault or damage is in the offing. With MOTORcheckUP, you can quickly diagnose and identify specific deficiencies and underlying causes. This saves money, extends the life of the engine and improves performance. Should the engine be damaged, MOTORcheckUP provides information about the causes. Such as for example Turbo Charger Companies do.

FLUIDcheckUP – the quick test for all lubricating oils All lubricating oils contain important additives to prevent damage and protect the oils from overheating, wear and tear and ageing. When these oils age, or are used up, oil sludge is formed. Because of this, the life expectancy and efficiency of the motor decreases, while at the same time increases operating costs and jeopardising the functionality of operating areas.

With FLUIDcheckUP, you can check the state of health of the components of vehicles. Just one drop of the fluid is enough. Also, the efficiency of the oils in the brake system, power steering/ hydraulics, automatic transmission or manual transmission, as well as their functionality, is identified in this simple way The industry offers a wide spectrum of use where the same instructions apply. With only one drop of oil, the total condition of the system, its components and the oils themselves are established. Long-term observation and control in particular becomes extremely simple and very reasonably price FLUIDcheckUP is not just used for your safety. It is especially used as a preventive measure for the maintenance of the reliability of components, avoidance of expensive repairs and extension of service life.

The electronic evaluation method intelligent DIAgnosis system  

The final, fully functional „i DIA“ device This is all you need to evaluate MOTORcheckUP tests. „i DIA“ is independent, fully automatic, easy to handle, operated by touch screen. Connects to internet or W-LAN. The high-tech evaluation revolution. Insert the test paper into the slot on the right hand side, press the key “GO” and within 30 sec the result is transmitted via internet.

„i DIA“ is supplied in a stable box… The box „i DIA“ is supplied in a stable box… WELCOME YOUR „i DIA“

Open lid of box All technical instructions how to start up your “i DIA” device are displayed. A link leads to the operating manual.

The test paper FRONT BACK The test paper displayes a precious metal look.

The test reports Within 30 sec the customer receives the test result. Simple. Fast. Reliabel. Automatically and online. Made by MOTORcheckUP. Made in Germany.

The unique „i DIA“ method by MOTORcheckUP