INTRODUCTION to EUROFORM Euroform is a panel formed by steel frame and special plywood for reinforced concrete construction in any type Most common building material in construction site for experienced technician Euroform panels are systemized formwork, easy to install and dismantle -1-
SPECIFICATIONS (standard size) 600 A / B 1200mm 150mm 9.6kg 200mm 11.1kg 250mm 11.9kg 300mm 12.8kg 350mm 13.7kg 400mm 14.6kg 450mm 15.5kg 500mm 16.9kg 600mm 19.0kg Nail hole 300 Wedge pin hole 300 1200 Profile – F type 300 Tile hole Rivet 300 Gusset plate Cross-bar (Angle) -2-
CHARACTERISTICS Easy to build sheathing board by combination of Euroform to meet structure type – Does not require special tools Less construction workers and less time for construction… … therefore costless Reused for numerous times Therefore, again, costless Easy to get supply Excellent durability of frame Various sizes of Euroform are available for different types and sizes of constructions -3-
ACCESSORIES OUT CORNER product is installed temporarily outside the corner of the structure. It provides the connection between the concrete form panels. The right size Out Corner for the right size Euroform can be used for any connection, depending on the length of the concrete form panels to be connected. IN CORNER product is the part of the formwork, which is installed temporarily inside the corner of the structure. Installed at the corner of the structure, the product provides the connection between the concrete form panels. Various sizes of the product are available for the connection, depending on the space between the concrete form panels. WEDGE PIN product is the part of the formwork, used for connecting the Euroforms. -4-
ACCESSORIES (Cont’d) Flat-Tie is placed in between the Euroforms placed parallel to secure it firmly in place and to assure the thickness of the concrete reinforced. Pipe-Hook is used to fasten the vertical and horizontal pipes. Column-Band are parts that prevent the expansion of the Euroform when pouring cement into the pilar part of the structure. It is also easy to install and dismantle. -5-
INSTALLATION Euroform designed for workers to easily assemble and safely install guarantees high working efficiency to achieve economical construction. KCC World KPJV Inc. can supply Euroform together with the Korean workers (for training purposes, if found necesssary) to safely and easily produce any kind of structure based on extensive experiences in construction. -6-
ECONOMICS (Plywood vs. Euroform) Cost analysis of Plywood covering 100,000sqm Product Specifications Qty. Unit Price (PhP) Total Remarks Plywood 1200mm * 2400mm 17,000 Ea 1,280 21,760,000 re-uses 6 times Pipe 4m 7,730 M 868 6,709,640 I beam 25,000 400 10,000,000 Form oil 1,250 L 100 125,000 Accessories 5 % 132.4 1,929,732 Labor fee Skilled carpenter 19,200 Wage 800 15,360,000 Workers 9,000 500 4,500,000 Contingency 3 42.97 595,800 60,980,172 -7-
ECONOMICS (Cont’d) Cost analysis of Euroform covering 100,000sqm Product Specifications Qty. Unit Price (PhP) Total Remarks Euroform 600mm * 1200mm 7,100 Ea 1,750 12,425,000 Eurofrm re-uses 15 times Incorner (200+200) * 1200 200 1,083.5 216,700 Wedge pin L=200mm 190,020 3 570,060 Flat tie 4m 200,260 3.1 620,806 Pipe 7,730 M 868 6,709,640 Hook clamp 28,720 6 169,620 Form oil 1,250 L 100 125,000 Accessories 5 % 190.68 1,041,841 Labor fee Skilled carpenter 19,200 Wage 800 15,360,000 Workers 9,000 500 4,500,000 Contingency 44.72 595,800 42,334,467 -8-
ECONOMICS (Cont’d) Hence, savings could be as much as 30% The estimated construction cost for a 100,000sqm floor area when using plywood would cost around Php 60,980,172, whereby Euroform could only cost Php 42,334,467 Hence, savings could be as much as 30% -9-