CVILUX NEW PRODUCT INTRODUCTION

FFC FPC Conn Wire to Board Power Board to Board Phone Jack 1996 2000 2002 2003 2004 TABLE OF CONTENT FFC FPC Conn Wire to Board Power Board to Board Phone Jack I O & Sim Card CF11　　1.00mm pitch CI01　　2.00mm pitch CP25　　2.50mm pitch CB03　　1.00mm pitch CJE1　　3.5mm pitch CSM1　　Dual Type CF31　　1.00mm pitch CI14　　1.00mm pitch CP27 2.00mm pitch CB12　　1.00mm pitch CSM3　　Dual Type CF35　　0.50mm pitch CI22　　2.50mm pitch CB22　　2.00mm pitch CSM2　　Micro Sim C CF35B 0.50mm pitch CI30　　2.50mm pitch CU02　　 USB 2.0 Type B CF42　　0.50mm pitch CI40　　1.25mm pitch CU18　　 USB 3.1 Type C Board to Board CF50　　0.50mm pitch CI40B 1.25mm pitch CU18B　 USB 3.1 Type C CF50B　 0.50mm pitch CI52　　 7.92mm pitch CU18C　 USB 2.0 Type C USB 2.0 Type C CF50C　 1.00mm pitch CI60　 　2.50mm pitch CH07　　1.00mm pitch CF50D　 1.00mm pitch CID1　　4.00mm pitch CH16　　1.00mm pitch CF50E　 0.50/1.00mm pitch CID7　　2.54mm pitch CF58　　0.30mm pitch CIDJ　　 2.40mm pitch CF65　　0.50mm pitch CIDL　　 1.25mm pitch CF65B　 1.00mm pitch CIDM 　 1.25mm pitch CF69　　0.50mm pitch CIL4　 　2.50mm pitch

FFC/FPC CONNECTOR

FFC/FPC CONNECTOR No. of Circuits: 04 to 20 Receptacle Matte Tin over nickel SMT Type Downside contact Tube/Reel Packing Height 2.7mm Back flip Special Locking Type For increasing retention force

FFC/FPC CONNECTOR No. of Circuits: 04 to 40 Receptacle Gold flash over nickel SMT Type Downside Contact Reel Packing Height 0.96mm Special Locking Type For increasing retention force

Other Suppliers FFC/FPC CONNECTOR COMPANY SERIES PANASONIC Y5BW No. of Circuits: 04 to 29 (Available: 8) Receptacle Matte Tin/Gold flash over nickel SMT Type Dual Side Contact Reel Packing Back flip Height 0.96mm Special Locking Type For increasing retention force

FFC/FPC CONNECTOR No. of Circuits: 12 Receptacle Matte Tin/Gold flash over nickel SMT Type Downside Contact Reel Packing Height 1.46mm Special Locking Type For increasing retention force With PEG

FFC/FPC CONNECTOR No. of Circuits: 0.5mm:12,20,26 1.0mm:10 Receptacle Matte Tin/Gold flash over nickel SMT Type Downside Contact Tube/Reel Packing Height 1.5mm Special Locking Type For increasing retention force

FFC/FPC CONNECTOR No. of Circuits: 07-61 (Available:7,11,23,26) Pitch:0.3mm Receptacle Matte Tin/Gold flash over nickel SMT Type Dual side Contact Reel Packing Height 0.9mm For spec. detail, please refer to the catalogue

FFC/FPC CONNECTOR No. of Circuits: 04 to 35 (Available: 18) Receptacle Matte Tin/Gold flash over nickel SMT Type Top Entry Reel Packing Height 5.5mm Special Locking Type For increasing retention force

FFC/FPC CONNECTOR SPECIFICATION No. of Circuits: 03 to 18 (Available: 8) Receptacle Matte Tin/Gold flash over nickel SMT Type Top Entry Reel Packing Height 5.5mm Special Locking Type For increasing retention force SPECIFICATION

WIRE TO BORAD CONNECTOR

Other Suppliers WIRE TO BOARD CONNECTOR SPECIFICATION COMPANY SERIES JST KRD Series Standard SPECIFICATION No. of Circuits: 12 1=Matte over nickel IDC Type Height: Crimp Type: Height 6.8mm IDC Type: Height 7.25mm Color: A0 = Nature (#26) A6 = Green (#28)

Other Suppliers WIRE TO BOARD CONNECTOR SPECIFICATION COMPANY SERIES JST NR Series Standard SPECIFICATION No. of Circuits: 02-15 IDC Type Terminal Plating: 1=Matte tin over nickel 2=Gold flash over nickel

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST XH SERIES No. of Circuits: V: 02-20 ; H: 02-15 1=Tin over nickel K0 (Pin kinked) = Standard V type and H type With Locking Wall Additional locking unit for secure connection ＊Caters to the market demand

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST GH Series Mating with CI40 HOUSING COMPANY SERIES JST GH Series No. of Circuits: 02-15 Vertical and Horizontal SMT 1=Matte Tin over nickel Tape&Reel Packing *Locking slot provides secure mating to avoid pin damage

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST GH Series HOUSING 　No. of Circuits: 02-15 TERMINAL 　Plating: 1=Tin over nickel 　T01 = AWG #26~#30 　Reel packing 　Material: P = Phosphor Bronze (elastic and anticorrosion)

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST VA/NVA SERIES No. of Circuits: 02 Widest Pitch (previous: 7.5mm) 1=Matte Tin over Nickel Vertical and Horizantal ＊With Plastic Board Lock which feature JST does not possess.

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES JST XA Series HOUSING 　No. of Circuits: 02-15 　Gold flash over nickel With Locking Latch 　Color Nature DIP HEADER 　1 = Tin over Nickel 　Ｖertical 　K0 = With Pin Kinked ＊Caters to the market demand

WIRE TO BOARD CONNECTOR HOUSING 　No. of Circuits: ONLY 03 pin 　With Locking Latch 　NH = Halogen-Free HEADER 　SMT 　1 = Matte Tin over Nickel 　Horizontal 　Reel Packing ＊With Iron Shield for insulation protection from damage We used to have 1.00mm pitch, now we have 1.25mm For spec. detail, please refer to the catalogue

Other Suppliers WIRE TO BOARD CONNECTOR COMPANY SERIES YEONHO No. of Circuits: 02 SMT Type1 = Matte Tin over nickel Horizontal Tape & Reel ＊Light bar application ＊Sink Board Type with fixed tab ＊Simplify the production process * Mating with PCB only

WIRE TO BOARD CONNECTOR No. of Circuits: 02-15 SMT 1 = Matte Tin over nickel Vertical and Horizontal Tape&Reel Color Nature and Black ＊Caters to the market demand For spec. detail, please refer to the catalogue

POWER CONNECTOR

POWER CONNECTOR No. of Circuits: 3 Receptacle Gold flash over nickel SMT Type Reel Packing For battery charging

POWER CONNECTOR No. of Circuits: 2,4 Receptacle Gold flash over nickel SMT Header-Vertical Mate with PCB High voltage Application: Light bar ＊Cost saving – Mating PCB without the housing and terminal

BOARD TO BOARD CONNECTOR

BOARD TO BOARD CONNECTOR No. of Circuits: 02 to 50 Receptacle Gold flash over nickel SMT Type DIP Type Smallest pitch. 1.27mm used to be smallest

Other Suppliers BOARD TO BOARD CONNECTOR COMPANY SERIES SAMTEC MLE No. of Circuits: 06 to 100 Receptacle Gold flash over nickel SMT Type Mate with either side Smallest pitch 1.27mm used to be smallest

Other Suppliers BOARD TO BOARD CONNECTOR COMPANY SERIES SAMTEC MMS No. of Circuits: 02 to 40 Receptacle Gold flash over nickel TOP ENTRY-DIP Type -SMT Type SIDE ENTRY-DIP Type

PHONE JACK CONNECTOR No. of Circuits: 06 Receptacle Gold flash over nickel Mounting Style: Middle DIP- Menu 1 TYPE: Bevel+ Forward- Menu 1

PHONE JACK CONNECTOR No. of Circuits: 06 Receptacle Gold flash over nickel Mounting Style: Middle DIP+SMT-Menu 2 TYPE: Bevel+ Reverse -Menu 2

PIN HEADER CONNECTOR

PIN HEADER CONNECTOR No. of Circuits: 2-40 Gold flash over nickel Type: Side Entry SMT Vertical Dip Type Horizontal Dip Type Smallest pitch ＊Caters to the market demand For spec. detail, please refer to the catalogue

PIN HEADER CONNECTOR No. of Circuits: 6-100 Gold flash over nickel SMT Type Smallest pitch ＊Caters to the market demand

SIM CARD CONNECTOR

SIM CARD CONNECTOR A00: Height = 1.5mm Selective Gold plated flash over nickel B00: Height= 1.18mm For spec. detail, please refer to the catalogue

SIM CARD CONNECTOR Dual Type for double SIM cards Selective Gold flash over nickel For spec. detail, please refer to the catalogue

SIM CARD CONNECTOR

I/O CONNECTOR SPECIFICATION No. of Circuits: 40 Receptacle Gold flash over nickel SMT Type Tape&Reel Height 5.4mm ＊Caters to the market demand SPECIFICATION

I/O CONNECTOR Transfer speed: Gen 1: 5G, Gen 2: 10G

We are committed to enhancing product quality and stability, to obtain customer's trust and satisfaction.