Technology And Engineering GRAPHIC PRODUCTION Varnising Sumber buku : Mengerjakan pemvernisan Penyusun : Agus Nugroho Editor : Endro Santoso HS
LEARNING OBJECTIVES After learning of this study, students are expected to be able to: Understand and know the UV varnish tools and materials Use the UV varnish machine according to its function Use the UV varnish material Do the varnishing Answer the formative test Teknologi dan Rekayasa
Understanding Coating process that similar with laminating, but using a chemical coating material that has the different product result Teknologi dan Rekayasa
UV Varnish Machine Teknologi dan Rekayasa
Prepare the tools and materials Clean the varnish roller Make The Working Steps Prepare the tools and materials Clean the varnish roller Fill the varnish tank container Stack and arrange the paper that will be varnished in the inlet table. Teknologi dan Rekayasa
Adjust the roller pressure Do the trial printing Adjust the income unit Adjust the roller pressure Do the trial printing Run the varnishing process Teknologi dan Rekayasa
Prepare the varnishing working place Prepare the palette board according to its requirement Prepare the varnish, adhesive material and the retailer Teknologi dan Rekayasa
Prepare the template for specific part varnishing Adjust the engraving and transferor liquid Prepare the dryer and the receiver unit Teknologi dan Rekayasa
Prepare the varnishing example according to the work criteria Check the neatness and accuracy of the varnish example result Run the mass varnishing Teknologi dan Rekayasa
Save the varnishing result in the prepared place Turn the engine off according to the procedure once the process is finished Save the varnishing result in the prepared place Teknologi dan Rekayasa
Perform varnish engine maintenance Prepare the working equipment and the lubricant Check (repair if there is a damage) the lubrication system Examine/check all parts carefully Teknologi dan Rekayasa
Clean all parts from dust and dirt Prepare and check the working equipment and easily worn parts Turn on the machine Teknologi dan Rekayasa
Replace and note the broken machine parts Do the varnish test Check the accuracy, quality, and neatness of the varnish holder. Teknologi dan Rekayasa