White-Star

Features & Benefits Low Odor Strong Adhesion UV Protection 130 g/l in VOC Content Strong Adhesion 1000 lbs. of Tensile Strength is Experienced When Bonding to Modified Membranes UV Protection Protects Against UV Exposure and Premature Aging Fire Resistant/Fire Rating Meets ASTM E 108 Class A at 2:12 Slope Fast Curing Fully Cures in 24 Hours FM Approvals Approved Over All Garland Hot Asphalt, Weatherking, Green-Lock and Torch Systems As A Flood Coat Durability Improves Impact Resistance of Any Roof System

Application Rates Spray or Roll 2 Gallons Per 100 Square Feet (32 Wet Mils) of White-Star Then Broadcast White Aggregate at 200 lbs. Per 100 Square Feet Into the Wet Adhesive (.81 l/m2)

White-Star Top Coated Gravel West Coast Requirement for Title 24 Approval! Spray or Roll 1 Gallon Per 100 Square Feet (16 Wet Mils) of White-Star Then Broadcast 3/8” White Aggregate at 200 lbs. or Roofing Mineral at 28 lbs. --Per 100 Square Feet Into the Wet Adhesive Wait 24 Hours to Cure Finally Spray or Roll a Second Layer at 1 Gallon Per 100 Square Feet (16 Wet Mils) Covering the Aggregate

White-Star Layers All-Knight Primer is Required Over All New Bur/Modified Asphalt Systems at ½ -1 Gallon Per Square Prior to Application of the White Star Then Apply White-Star with the Desired Application Technique

Temperature Difference

Summary White-Star is a Single-Component Aliphatic Polyurea, Liquid Adhesive that when Combined with White Gravel Will Maintain, Restore and Upgrade Smooth or Mineral Roof Systems It Provides a White ENERGY STAR, Title 24, LEED, and CRRC Rated, Reflective Surface With All the Benefits of a Graveled Roof