MTS Insight Electromechanical Test Solutions HOW TO USE THESE TEMPLATES: These templates are designed with specific fonts, colors, and placement, as well as the “be certain” underlying theme. This creates a unique and consistent look and feel for all MTS PowerPoint presentation. You can use any of the following templates in the order that best suits your presentation. However, every presentation should begin with a title slide such as this one. TITLE SLIDE SPECIFICS: The title of your presentation should be limited to no more than two lines, fitting within the outlined box. (Do not decrease the font size to “make it fit.”) FONT: Arial Typeface for all copy.

Situation Overview – Market Material Testing Trends: Component obsolescence has made it increasingly difficult to receive support for certain EM frames. Replacement part availability can no longer be guaranteed for key lab equipment. Some frames, due to age, are no longer receiving product development and support for their application software. Many labs are not standardized, resulting in lost productivity. Under-utilized assets due to idle material testing machines and accessories.

Situation Overview – Individual Site Test Information: What type of tests are to be performed? tension, compression, bend, fatigue, etc. What information are you trying to obtain from these tests? What are the expected loads? What test rates/frequencies are required? What standards, ASTM or other, apply to the test? What is the control mode for the test? Is strain/measurement control required? If so, what is the expected full scale strain? Will the tests be performed at ambient conditions or is an environmental chamber required?

Situation Overview – Individual Site Specimen Information: What are the specific materials to be tested? aluminum, stainless steel, silicon carbide, etc. If it is a composite material: What type of composite is it? (fiber, whisker or particulate reinforcement) What is the matrix material? What is the reinforcement material? What is the specimen geometry? round, flat, tabbed, buttonhead, etc. What are the specimen dimensions? total length, width, thickness, gage length, gage diameter, etc. Can the customer provide a sketch? Is a sample available?

Situation Overview – Individual Site Special Conditions Information: Elevated Temperature Chamber/Furnace: What are the minimum and maximum test temperatures? If negative temperatures, what type of cooling is preferred? LN2, etc. What tests need to be performed at elevated temperature? Is strain measurement required at elevated temperature? Controlled Atmosphere Furnace: What are the minimum and maximum test temperatures What is the required vacuum level? Rough vacuum = 10-2 torr High vacuum = 10-5 torr Is an inert environment required? Argon, helium? Which of the above tests need to be performed in a controlled atmosphere? Is strain measurement required in the controlled atmosphere? Are there any other special conditions?

Situation Overview – Individual Site Lab Operations - Maintenance How are you able to maintain your test system? Software current? Calibrations up to date? Controller / electronics current? Lab Operations - Productivity How is your laboratory measured for efficiency? How do you ensure your lab remains competitive? What are your uptime goals? What would you like to improve? People Processes Equipment

Situation Overview – Individual Site General Test Program Information: Whose testing equipment do you currently use? Who else besides MTS are you looking at for new equipment? Is there any existing equipment that will need to be integrated with the new system? When do you need a response to this request? What are the delivery requirements for this system? What is the expected purchasing schedule for this system? What is the budget for this purchase? What is the funding source? What are your future testing needs? How do you see your testing requirements changing in the short term? In the long term?

MTS Insight Electromechanical Test Solutions Perform virtually any static test on a broad array of specimens with the comprehensive line of MTS Insight Electromechanical Test Solutions.

MTS Insight Electromechanical Test Solutions Meet a full spectrum of standard tests, such as: Peel Tear Sheer Tensile Compression Flex/bend As well as more advanced tests, such as: Creep Stress relaxation Multi-cycle HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Conduct static testing on a full range of specimens, such as: Low to high-strength components Structural materials Composites Metals Plastics Elastomers Biomaterials Paper products Adhesives Foam HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Single-Column Tabletop Models Available in 1 and 2 kN force capacities For lower force testing of components, biomaterials, plastics, metals, elastomers, paper products, adhesives and foam. HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Twin-Column Tabletop Models Available in 5, 10, 30 and 50 kN force capacities For medium force testing of components, biomaterials, plastics, metals, elastomers, paper products, adhesives and foam specimens in a wide range of sizes. Easily accommodates MTS environmental simulation system. HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Twin-Column Floor Standing Models Available in 100, 150, 200 and 300 kN force capacities For testing metals, high-strength components, large fasteners, structural materials, and composite materials. Easily accommodates MTS environmental simulation system HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Wide Configuration Model Available in 50 kN force capacity Large envelope for testing foam, packaging, and finished components Easily adaptable for testing up to five specimens simultaneously HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Extended Length Models Available in 1, 2, 5 & 30 kN force capacities For high-elongation testing of plastics, adhesives, foam and elastomer products Features crosshead travel of 1400 mm (55 in) High Speed Model Available on 2 kN Extended Length frame For testing high strain plastics, adhesives, foam and elastomer products Features crosshead speeds of up to 2540 mm per minute (100 in/minute) HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Best-in-class TestWorks Software Scalable and easily configured to handle evolving test demands Three packages to match your specific needs Efficient, user-friendly interface Complete your test in three simple steps Powerful test definition capabilities Intuitive test method creation utilities Wide array of pre-packaged methods Custom method generation via MTS Consulting HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Best-in-class TestWorks Software Efficient, user-friendly interface provides simple, three-step testing Select - Choose the standard or custom method you want to run Run - Monitor your test real-time using the TestWorks Virtual Control Panel Report/Review – Create custom formulas and reports. Export results to Excel, Word, html, or other formats. HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Best-in-class TestWorks Software Three distinct packages to meet your specific and evolving testing needs: TestWorks Essentials runs preset testing methods, including peel, tear, sheer, tensile, compression, creep, stress, cyclic and strain at low- to high-force capacities. Base product for both the Advanced and Creator packages. TestWorks Advanced runs preset testing methods with added ability to introduce non-motion control test segments and calculations. TestWorks Creator is designed for the advanced user who wants to create or modify test methods by adding and sequencing motion or control segments. HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Best-in-class TestWorks Software Powerful test definition capabilities TestWorks software enables the easy creation, customization and sharing of test methods. Optional Pre-packaged Methods LIMS SPC/SQC N, R & K for sheet metals Metals application package Plastics application package Cellular products application package Textile application package Food application package Paper application package Adhesive application package Foam application package Hysteresis Advanced cyclic Limited Cyclic Creep/stress relaxation Custom Methods MTS consultants can develop testing methods and report and export templates for your unique specifications Custom methods, report templates and export templates are guaranteed to perform to your specifications and include 30 days of free technical support to ensure requirements are met. HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities: HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities: Transducer type and serial number Manufacturer’s name and I.D. number Calibration files and cal-related information Other MTS-specific information Works with other manufacturers’ IEEE 1451.4 compliant devices HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips The world’s most comprehensive selection of high-performance extensometers - laser, axial, high-temperature, and. . . HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips The world’s most comprehensive selection of high-performance extensometers - laser, axial, high-temperature, and. . . extended length (XLT) 720 mm Travel 10 micron Resolution 10 gram Tracking Force Optical Digital Encoder Available in permanent or “slide-away” mounting hardware HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips The world’s most comprehensive selection of high-performance extensometers - laser, axial, high-temperature, and extended length (XLT) High-temperature furnaces, environmental chambers, and mini-baths HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips The world’s most comprehensive selection of high-performance extensometers - laser, axial, high-temperature, and extended length (XLT) High-temperature furnaces, environmental chambers, and mini-baths MTS EM Extend™ Load Extension Kit HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions High-Quality Accessories Highly accurate MTS load cells with IEEE 1451.4 “TEDS” Self-ID capabilities Advantage family pneumatic, manual screw and wedge grips The world’s most comprehensive selection of high-performance extensometers - laser, axial, high-temperature, and extended length (XLT) High-temperature furnaces, environmental chambers, and mini-baths MTS EM Extend™ Load Extension Kit A wide array of standard and custom test fixturing and adapters HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Convenient, Ergonomic Handset Crosshead Return 4 X 20 Line Display Thumb Wheel Jog Up and Down Play/Run Program Enable Help Function 1 and 2 System Active Pause Test Stop Test Interlock HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Compact, Innovative Electromechanical Frame Solid steel crosshead and table for stiffness Available in a variety of compact single- and double-column configurations Precision anti-backlash ball screws Precision guide columns Integrated load cell connection on the crosshead DC motor drives on 1- 50 kN systems AC brushless motor drives on 100 - 300 kN systems Ball screw encoder Quiet drive system Anti-rotate feature HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Fully-Integrated Digital Controller Up to 1000 Hz DAQ rate 1000 Hz control rate 20-bit resolution Built-in USB 2.0 for PC communication Self-ID capability for calibration and auto ranging Two optional strain inputs in addition to the system load cell Three optically isolated digital inputs and outputs Two BNC monitor connectors Test area enclosure interlock connector HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions Fully-Integrated Digital Controller USB 2.0 Connection to PC - USB Handset Connection – RJ45 Test Area Guard or Other Interlock – RJ50 Encoder / Insight XLT Connection – RJ50 Digital I/O Connection – D25 0-10 V Monitor – BNC Strain 1 and 2 – RJ50 HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions System Safety Features Push-button emergency stop and a remote enable/disable switch Mechanically adjustable limits to stop the crosshead at predetermined points Motor overheat device to automatically turn off the motor power supply Ability to set limits for load, extension, strain, or any other data channel Safe system voltage of 48V Integrated test area enclosure interlock HOW TO USE THIS TEMPLATE: When an image is not necessary on your slide, and you have a good amount of copy, use this format to create your slide. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly.

MTS Insight Electromechanical Test Solutions HOW TO USE THIS TEMPLATE: When an image, graph or video is necessary on your slide, and you have copy, use this format to create your slide. The gray box represents the area for illustrations or photographs. The red box can be used in for copy in white or black. This font size is 16 point. FONT: Arial Typeface for all copy. Headline size is 22 point. Secondary Headline size is 20 point. Main bullet size is 18 point. Secondary bullet size is 16 point. Please note the footer on the master slide and edit accordingly. THANK YOU!