Assembly Guide

Tool : electric soldering iron ,350℃ solder the Front camera, the rear camera and flashlight, LCD, Volume key; Tool : electric soldering iron ,350℃

Paste a MALAR

Paste a MALAR

Paste conductive foam

Assembly the TP

Install the receiver and the LCD into the housing-A

Make sure the LCD in the fixed position

Assembly the Light-sensitive sensor shelf

Assembly the PCBA (please take care of the FPC of TP )

Screw of PCBA

Assembly the FPC of TP : a, unlock the TP connector (up);b, insert the FPC of TP; c, lock the TP connector (down)

Assembly the volume key (FPC)

Assembly the MIC

Paste a conductive fabric to cover the MIC line

Assembly MIC

Paste a conductive fabric on the grounding of LCD and PCBA

Paste the antenna on the Housing -B

Install the SPK

Assembly the housing A, housing B

Assembly the housing A, housing B;(please take care of the volume key )

Screw of housing