5708 Models and Peripherals Product Introduction 5708 Models and Peripherals

Agenda 5708 Various Models Multi Scanner System 3DVision / 3DMultiVision 3D Solids Scanner Locator 3DLinkPro Accessories

5708 Basic Model 5708L 5708V 5708S Feature Level Volume Volume, opt visualization, opt system Output Average Level/Distance + Volume Min/Max Level/Distance + 3D image Multi Scanner system Recommendations Single scanner in any vessel Single scanner Diameter: <5m, <12m No limitation LCD Local Configuration Viewing High Temp Opt Upgraded Yes Visualization

5708L Determines the average level of the stored contents and average distance from the scanner to the surface of the material Configuration from LCD and keypad Designed to beat all other level devices in the market

5708V Highly accurate readings of level and volume Provides minimum and maximum level/distance measurements Appropriate for vessels up to 16.5ft (5m) or 40 ft (12 m) in diameter Wide beam angle

5708S Highly accurate readings of level and volume Provides minimum and maximum level/distance measurements No vessel width limitation due to option of mounting two or more devices in the same vessel Generates a 3D representation of the stored contents on a remote computer

Multi Scanner System 5708S designed to work as a single scanner in a vessel or in Multi Scanner mode No limitation to the number of scanners Covering very large areas Information from all devices combined in a Controller (dedicated industrialized computer) Acoustic signal transmission synchronized Requires constant connection to the 3DVision SW

Multi Scanner System – cont’ 4-20mA output in all scanners is in synch to output the same volumetric value Configuration of Multi Scanner vessel is as simple as configuring single scanner using the 3DVision Configuration Wizard All scanners must be connected in the same RS-485 Daisy-Chain

3DVision / 3DMultiVision 2 Modes of operation: Device Configuration (default) Advanced Connection Advanced Multi-Server– Multi-Client application, based on MS .NET Framework 3.5 SP1 Easy-to-use graphic interface Provides immediate view of all vessels Hierarchy organized: Sites – Vessels – Scanners

3DVision – cont’ Synchronizes Multi scanners system 3DVision limited to single vessel (no limitation on amount of scanners) 3DMultiVision has no limitations - Licensed Unlimited number of clients connected to single server Report generation Compatible with Windows XP and 7

3D Solids Scanner Locator Automatic calculation of optimal location Solution based on the number of scanners: 1-3 Solution provides maximal potential error Graphical interface to show vessel’s details

3D LinkPro Designed to work with the 3D Solids Scanner Provides remote connection to the device(s) Requires local SIM card supporting GPRS and SMS Fully integrated into the 3DVision to allow smooth operation No function restriction Modem Wizard application to test the SIM card and LinkPro in current installation

Accessories Flanges – various sizes Neck Extension – 12” (30cm) and 20” (50cm) 10 and 20 degrees angle adapter Cable extender – 12” (30cm) and 20” (50cm) Hi Temperature (180°C / 356°F) Antenna Mounting Assembly