1900 Projectors Instructions

AMX Controller If the screen on the controller is blank, touch the screen.

After touching the screen, this image will show up After touching the screen, this image will show up. Touch the screen again.

Then this image will display on the screen Then this image will display on the screen. Select a source for either left screen or right screen or both screens.(PC, Laptop, Doc Cam, Video, DVD, or VCR). Make sure the source you want to display has been powered on.

Additional actions After the source has been selected, the projector will automatically power on, and the projector screen will automatically come down.

Source selection If the source selected is DVD or VCR, touch DVD/VCR Control to access the controls for DVD or VCR. This image will be displayed.

Shut down To shut system down, press exit. After exit has been pressed, the system will shut down in 10 seconds (projectors shut down and projector screens go up).

Function Of Controls Proj On: turns on projector only Proj Off: turns off projector only Mute: mutes audio output Vol - : decreases audio level Vol + : increases audio level Screen Up: raises a screen Screen Down: lowers a screen Back: returns to previous screen Source: allows access to sources DVD/VCR Control: allows access to DVD or VCR controls Exit: shuts the system down