Sure Torque develops and produces closure torque testers since 1984 Sure Torque develops and produces closure torque testers since 1984., and provides the widest range of Torque Testing solutions

ST-LAB – full automatic torque testers Main features: Operator-independent testing Programmable Topload control Customer configurable parameter setup for 10 different sample types SD card, Serial communication (Ethernet and USB in progress) Quick overchange between different samples - no tool ! STATISTIC function (Average, deviation, cpk, etc) All the sample fixings and movements are automatic, with 100% repeatable speed and forces

ST-LAB basic test modes Release test Torque application Release-reapplication test (no seal break, sample can be put back on the line!) Application than release test Undestructive release test (passed-failed test) Warranty ring application test Warranty ring bridge breaking test Strip test Application overtorque test

Release-Application demo video Sure Torque server Youtube

ST-LAB advanced test modes Application Angle Tests – Measuring the application angle while removing the closure. End of removal can be detected by: Pull – lifting the closure when thread ends pass Push – the thread ends’ jump-over when over- rotating the closure by 360o after the thread ends’ pass Results: Initial release torque Application angle Bridge torque

Application Angle test demo video Sure Torque server Youtube

ST-LAB advanced test modes Topload Seek Test – Increases Topload stepwise until the closure is ratchetting. Results: Maximum release torque and final topload

Topload Seek Test demo video Sure Torque server Youtube

Main advantages of the ST-LAB Operator-independent testing Saving on the test samples that can be put back in the production by using the release-reapplication or undestructive release tests – machine can save it’s cost in 1 year! Automatic Application Angle testing Special tests that may not be performed on manual torque testers (CR-Topload) Automatic result saving + print/export Included CALIBRATION KIT!

Statistics, History, Tool Change demo Sure Torque server Youtube

ST-H serie - universal handheld torque/force meter line One handheld unit that can be equipped with different test heads for different QC and maintanance measurements

ST-H serie ST-H-C chuck calibrators - For application torque measurement, directly on the capper head. ST-H-T topload unit - For direct topload spring force measurement on the machine ST-H-D desktop unit - For cap release torque measurement in the QC The following film shows the aplication of the chuck calibrator (video was made with older machine – sorry about it )

Chuck Calibration with ST-H4 (old version) demo Sure Torque server Youtube

ST-M manual desktop torque tester line

The smartest manual torque tester with features as: - graph displaying and storing - warranty ring bridge torque measurement - quicklock sample fixing - communication: SD card, print, data export

ST-C3 desktop torque tester Probably the smallest desktop cap torque testers on the market The ST-C3 has almost the same features as the ST-M2, but in the smallest size

ST-P palm model Ideal to test products in pouch, or for bottles with offset or oblique neck

ST-IMB The ST-IMB Intelligent Measuring Bottle measures both application torque and topload on the running capper. The instrument can be placed in any size of dummy-bottle.

Torque Etalon Bottle We provide calibration kits for all our Torque Testers. But for the quick verification we also provide the ST-TEB Torque Etalon Bottle with different torques.

For any further details please contact us: www.suretorque.eu mail@suretorque.eu