PRODUCT PROFILE Hotline: 0904213636 www.ipc-wiremesh.com.vn www.luoithephanipc.com.vn Email:luoithephan@ipc-vietnam.com.vn PRODUCT PROFILE Hotline: 0904213636

CONTENT 1 2 3 4 4 4 5 1 1 1 1 1 1 1 WELDED WIRE MESH - IPC-WIREMESH TM PROFILED STEEL DECKING - IPC-DECK TM 3 1 OTHER PRODUCTS 4 1 4 1 4 1 5 1 2

Deformed Bar Welded Wire Mesh Round Bar Welded Wire Mesh IPC-WIREMESH TM IPC Welded Wire Mesh introduction IPC Welded Wire Mesh is a combination of horizontally and transversely placed cold-drawn wires at right angles to each other. The joints of the wires are then welded automatically by the principle of combining melting and pressurizing, to uniformly create high strength – high quality wire mesh. Deformed Bar Welded Wire Mesh Round Bar Welded Wire Mesh

TECHINICAL SPECIFICATION

TECHINICAL SPECIFICATION

IPC-WIREMESH DIAGRAM APPLIED STANDARD Vietnam Standard TCVN 9391:2012, Welded fabric for the reinforcement of concrete Vietnam Standard TCVN 6288:1997, Cold-drawn steel bar for the reinforcement of concrete Vietnam Standard TCVN 1651-3:2008 (ISO 6935-3:1992) Steel for the reinforcement of concrete – Welded fabric British Standard BS 4482:1985, Specification for cold reduced steel wire for the reinforcement of concrete British Standard BS 4483:1998, Steel fabric for the reinforcement of concrete Singapore Standard SS1:1999, Cold reduced steel wire for the reinforcement of concrete Singapore Standard SS32:1999, Steel fabric for the reinforcement of concrete Australian Standard TA/TV/4671, Cold reduced steel wire for the reinforcement of concrete APPLIED STANDARD IPC-WIREMESH DIAGRAM STT Described parameter Symbol 1 Length of mesh L 2 Width of mesh B 3 Size of mesh L x B 4 Main wire diameter Dd 5 Cross wire diameter Dn 6 Main wire pitch Pd 7 Cross wire pitch Pn 8 Size of one rectangle section Pd x Pn 9 Vertical overhang section M1, M2 10 Horizontal overhang section S1, S2

Full yield strength layered lap Half yield strength layered lap LAPPING Laps are used to transfer load across continuous steel reinforcements. In order to do so, standardized length of laps is required Full yield strength layered lap Half yield strength layered lap Flying end lap

CONVERTING WIRE ROD TO WELDED WIRE MESH FORMULA

IPC-WIREMESH APPLICATION - Surface platforms, building floors, building roofs - Concrete walls - Sewer systems - Foundations, sidewalks, roads - Pools, water tanks - Barriers, fences - Many other applicable structures

IPC-DECKTM INTRODUCTION IPC Steel deck floors consist of profiled steel sheets and concrete filling, are used to substitute reinforced concrete and/or scraffold. Structural design of steel deck floors consists of wave-like zinc-galvanized steel sheets, onto which are triangle or round section steel joists, welded altogether

IPC-DECK FOR INDUSTRIAL FACILITIES IPC-DECK TM 2WB 51-1025 Thickness (mm) Weight (kg/m2) Material standard Coating 1 0.8 7.47 1.JIS G3302:SGC340-570 2.ASTM A653:SS230-550 1.JIS G3302:Z80-Z275 2.ASTM A653:Z90-Z275 2 1.0 9.34 3 1.2 11.20 4 1.5 14.00

IPC-DECK FOR INDUSTRIAL FACILITIES IPC-DECK TM 2WB 50-930 Thickness (mm) Weight (kg/m2) Material standard Coating 1 0.8 8.23 1.JIS G3302:SGC340-570 2.ASTM A653:SS230-550 1.JIS G3302:Z80-Z275 2.ASTM A653:Z90-Z275 2 1.0 10.29 3 1.2 12.35 4 1.5 15.43

IPC-DECK FOR HIGH-RISE BUILDING FLOORS IPC-DECK TM 2WB 51-600 Thickness (mm) Weight (kg/m2) Material standard Coating 1 0.8 10.47 1.JIS G3302:SGC340-570 2.ASTM A653:SS230-550 1.JIS G3302:Z80-Z275 2.ASTM A653:Z90-Z275 2 1.0 13.08 3 1.2 15.07 4 1.5 19.63

IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES… IPC-DECK TM 2WB 50-818 Thickness (mm) Weight (kg/m2) Material standard Coating 1 0.8 8.86 1.JIS G3302:SGC340-570 2.ASTM A653:SS230-550 1.JIS G3302:Z80-Z275 2.ASTM A653:Z90-Z275 2 1.0 11.07 3 1.2 13.29 4 1.5 16.60

IPC-DECK FOR THERMAL POWERPLANTS, REFINERIES… IPC-DECK TM 3WB 76-600 Thickness (mm) Weight (kg/m2) Material standard Coating 1 0.8 10.47 1.JIS G3302:SGC340-570 2.ASTM A653:SS230-550 1.JIS G3302:Z80-Z275 2.ASTM A653:Z90-Z275 2 1.0 13.08 3 1.2 15.07 4 1.5 19.63

IPC-DECK ACCESSORIES

IPC-DECK CALCULATION FORMULAS

PANEL – JOIST DECK JOINT PANEL – PANEL DECK JOINT Screwing method PANEL – JOIST DECK JOINT Welding method

PROPPING Depending on the span of the deck panel, temporary propping may be needed when constructing IPC-DECK. Following is some advice of propping methods.

NOTES WHILE CONTRUCTING IPC-DECK Delivering IPC-DECK Panels, by specific transportations Stocking IPC-DECK panels, to prevent moist and create ventilation Lifting IPC DECK panels

NOTES WHILE FILLING CONCRETE FOR COMPOSITE MATERIAL WITH IPC-DECK Start raking as soon as the concrete is poured out Do not directly step on the panels as they could be deformed Place hard boards above for walking surface

OTHER PRODUCTS WIRE ROD GALVANIZED STEEL WIRE

PLASTIC COATED STEEL WIRE OTHER PRODUCTS COLD – DRAWN STEEL WIRE 1.0 MM WIRE PLASTIC COATED STEEL WIRE