Sinsuoidal steady state power Instantaneous and average (real) power Reactive power Complex power Power factor Related educational modules: Section 2.9.0, 2.9.1 1

AC power Power is still the product of voltage and current: We are now interested in the case in which the voltage and current are sinusoids: 2

v(t) and i(t) are related 3

Instantaneous AC power Our previous (time domain) definition of power is called the instantaneous power In terms of our sinusoidal voltage & current: After some trigonometry and algebra: The power consists of a DC (constant) part and an AC (sinusoidal part) 4

Graphical representation of p(t) 5

Alternate representation for p(t) Which can be decomposed into two plots: Average (real) power and reactive power 6

Average Power We are generally more interested in the average power delivered to a load: Average power is: This is also called the real power (it’s the power that’s provided to the resistive part of the load over time) Units are watts 7

RMS values We want to assess the power delivered by different types of time-varying signals The power delivered to a resistive load: Find a DC (constant) value which delivers the same average power as the time-varying signal Called the effective or RMS value of the signal Used to “compare” different time-varying signals 8

Note why it’s called “RMS” Note: we want our average power to look like an “average” current squared times resistance or an “average” voltage squared divided by resistance We want to define these “effective” values Note why it’s called “RMS” 9

RMS values – continued Average power: Effective DC value: Equating to time-average value: , 10

Annotate previous slide to show VRMS, IRMS notation (RMS = “effective”) 11

Definition of RMS values The effective (or RMS) value of a signal is equal to the DC value which provides the same average power to a resistor For sinusoidal signal with no DC offset: , Average power in terms of RMS values: 12

Apparent power and power factor Power in terms of RMS values: The average (real) power is the product of apparent power and the power factor Apparent power: (units = volt-amps = VA) Power factor (pf): (unitless) Power factor is leading or lagging, to denote whether current leads or lags voltage 13

Interpretation of apparent power and pf Power factor is a property of the load For a complex load, the power delivered to the load is not exactly the power supplied by the generator If ZL is real  pf = 1 If ZL is imaginary  pf = 0, and no average power is delivered to the load 14

On previous slide, mention reactive power again. 15

Complex Power Complex power is a way to conveniently expressing the various power parameters and their relationships  or: 16

Annotate previous slide to show real (average) power and reactive power 17

Power relationships Complex power: Magnitude of S is the apparent power (units = VA) The real part of S is the average power (units = watts) The imaginary part of S is the reactive power (units = VAR) 18

Power Triangle 19

Example For the circuit below, (a) find the average power delivered by the source (b) find the powers absorbed by the resistor and capacitor (c) find the apparent and reactive powers delivered by the source (d) sketch a power triangle for the source 20

(a) find the average power delivered by the source 21

(b) find the powers absorbed by the resistor and capacitor 22

(c) find the apparent and reactive powers delivered by the source 23

(d) sketch a power triangle for the source Apparent power: 391VA Average power: 305W Reactive power: -244VAR 24

25